<feed xmlns='http://www.w3.org/2005/Atom'>
<title>user/sven/linux.git/drivers/bluetooth, branch v3.10.8</title>
<subtitle>Linux Kernel
</subtitle>
<id>https://git.stealer.net/cgit.cgi/user/sven/linux.git/atom?h=v3.10.8</id>
<link rel='self' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/atom?h=v3.10.8'/>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/'/>
<updated>2013-08-12T01:35:23Z</updated>
<entry>
<title>Bluetooth: fix wrong use of PTR_ERR() in btusb</title>
<updated>2013-08-12T01:35:23Z</updated>
<author>
<name>Adam Lee</name>
<email>adam8157@gmail.com</email>
</author>
<published>2013-07-10T02:02:12Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=ea788759177526b7a103baed9c711d284d822fe5'/>
<id>urn:sha1:ea788759177526b7a103baed9c711d284d822fe5</id>
<content type='text'>
commit d9c78e9738ccd0017b10b8f44462aafb61904a4a upstream.

PTR_ERR() returns a signed long type value which is limited by IS_ERR(),
it must be a negative number whose range is [-MAX_ERRNO, 0).

The bug here returns negative numbers as error codes, then check it by
"if (ret &lt; 0)", but -PTR_ERR() is actually positive. The wrong use here
leads to failure as below, even panic.

[   12.958920] Bluetooth: hci0 command 0xfc8e tx timeout
[   14.961765] Bluetooth: hci0 command 0xfc8e tx timeout
[   16.964688] Bluetooth: hci0 command 0xfc8e tx timeout
[   20.954501] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110)
[   22.957358] Bluetooth: hci0 command 0xfc8e tx timeout
[   30.948922] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110)
[   32.951780] Bluetooth: hci0 command 0xfc8e tx timeout
[   40.943359] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110)
[   42.946219] Bluetooth: hci0 command 0xfc8e tx timeout
[   50.937812] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110)
[   52.940670] Bluetooth: hci0 command 0xfc8e tx timeout
[   60.932236] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110)
[   62.935092] Bluetooth: hci0 command 0xfc8e tx timeout
[   70.926688] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110)
[   72.929545] Bluetooth: hci0 command 0xfc8e tx timeout
[   80.921111] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110)
[   82.923969] Bluetooth: hci0 command 0xfc2f tx timeout
[   90.915542] Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
[   92.918406] Bluetooth: hci0 command 0xfc11 tx timeout
[  100.909955] Bluetooth: hci0 sending Intel patch command (0xfc11) failed (-110)
[  102.912858] Bluetooth: hci0 command 0xfc60 tx timeout
[  110.904394] Bluetooth: hci0 sending Intel patch command (0xfc60) failed (-110)
[  112.907293] Bluetooth: hci0 command 0xfc11 tx timeout
[  120.898831] Bluetooth: hci0 exiting Intel manufacturer mode failed (-110)
[  120.904757] bluetoothd[1030]: segfault at 4 ip 00007f8b2eb55236 sp 00007fff53ff6920 error 4 in bluetoothd[7f8b2eaff000+cb000]

Signed-off-by: Adam Lee &lt;adam.lee@canonical.com&gt;
Signed-off-by: Gustavo Padovan &lt;gustavo.padovan@collabora.co.uk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>Bluetooth: Add support for Mediatek Bluetooth device [0e8d:763f]</title>
<updated>2013-08-12T01:35:23Z</updated>
<author>
<name>Cho, Yu-Chen</name>
<email>acho@suse.com</email>
</author>
<published>2013-06-04T13:40:26Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=c519774d4e636eeea2c1490c179fb898bbc61c17'/>
<id>urn:sha1:c519774d4e636eeea2c1490c179fb898bbc61c17</id>
<content type='text'>
commit 178c059e7640aa8e50213400c6f3dde00189d979 upstream.

This patch adds support for Mediatek Bluetooth device

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0e8d ProdID=763f Rev= 1.00
S:  Manufacturer=MediaTek
S:  Product=BT
S:  SerialNumber=1.0
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=450mA
A:  FirstIf#= 0 IfCount= 2 Cls=ff(vend.) Sub=ff Prot=ff
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Signed-off-by: Cho, Yu-Chen &lt;acho@suse.com&gt;
Signed-off-by: Gustavo Padovan &lt;gustavo.padovan@collabora.co.uk&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>Bluetooth: Add support for Atheros [0cf3:e003]</title>
<updated>2013-08-12T01:35:23Z</updated>
<author>
<name>AceLan Kao</name>
<email>acelan.kao@canonical.com</email>
</author>
<published>2013-06-20T05:38:45Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=eba6a13b3ca37f4b2c8abb7793f0931a5bfadc7b'/>
<id>urn:sha1:eba6a13b3ca37f4b2c8abb7793f0931a5bfadc7b</id>
<content type='text'>
commit 1d5b569ef85d013a775560a90050dc630614c045 upstream.

Add support for the AR9462 chip

T:  Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=e003 Rev=00.02
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: AceLan Kao &lt;acelan.kao@canonical.com&gt;
Signed-off-by: Gustavo Padovan &lt;gustavo.padovan@collabora.co.uk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>Bluetooth: Add support for Atheros [0cf3:3121]</title>
<updated>2013-08-12T01:35:23Z</updated>
<author>
<name>AceLan Kao</name>
<email>acelan.kao@canonical.com</email>
</author>
<published>2013-07-17T03:27:40Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=df235047f274553f8942286fef812fde4ec32a60'/>
<id>urn:sha1:df235047f274553f8942286fef812fde4ec32a60</id>
<content type='text'>
commit 1ebd0b21ab14efb75950079840eac29afea2a26e upstream.

Add support for the AR3012 chip.

T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=3121 Rev=00.02
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: AceLan Kao &lt;acelan.kao@canonical.com&gt;
Signed-off-by: Gustavo Padovan &lt;gustavo.padovan@collabora.co.uk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>Bluetooth: ath3k: Add support for ID 0x13d3/0x3402</title>
<updated>2013-08-12T01:35:22Z</updated>
<author>
<name>Sujith Manoharan</name>
<email>sujith@msujith.org</email>
</author>
<published>2013-07-15T03:59:03Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=44c4127ace6fc02ff4e86318c11d90600874463e'/>
<id>urn:sha1:44c4127ace6fc02ff4e86318c11d90600874463e</id>
<content type='text'>
commit 5b77a1f3d7b7360dc2b7c6d2188d39b9f8432907 upstream.

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  5 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3402 Rev= 0.02
S:  Manufacturer=Atheros Communications
S:  Product=Bluetooth USB Host Controller
S:  SerialNumber=Alaska Day 2006
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=59701

Signed-off-by: Sujith Manoharan &lt;sujith@msujith.org&gt;
Signed-off-by: Gustavo Padovan &lt;gustavo.padovan@collabora.co.uk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>Bluetooth: ath3k: don't use stack memory for DMA</title>
<updated>2013-08-12T01:35:22Z</updated>
<author>
<name>Stanislaw Gruszka</name>
<email>sgruszka@redhat.com</email>
</author>
<published>2013-07-08T08:27:23Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=6bc14767620b9ef79140de5fe73cd25006e2da5f'/>
<id>urn:sha1:6bc14767620b9ef79140de5fe73cd25006e2da5f</id>
<content type='text'>
commit 517828a87994f41af6ae5a0f96f0f069f05baa81 upstream.

Memory allocated by vmalloc (including stack) can not be used for DMA,
i.e. data pointer on usb_control_msg() should not point to stack memory.

Resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=977558

Reported-and-tested-by: Andy Lawrence &lt;dr.diesel@gmail.com&gt;
Signed-off-by: Stanislaw Gruszka &lt;sgruszka@redhat.com&gt;
Signed-off-by: Gustavo Padovan &lt;gustavo.padovan@collabora.co.uk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>Bluetooth: ath3k: Add support for Fujitsu Lifebook UH5x2 [04c5:1330]</title>
<updated>2013-08-12T01:35:22Z</updated>
<author>
<name>Thomas Loo</name>
<email>tloo@saltstorm.net</email>
</author>
<published>2013-07-03T00:53:54Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=4008b2c77e1b7175d3ed17e99e1afdc0ec531427'/>
<id>urn:sha1:4008b2c77e1b7175d3ed17e99e1afdc0ec531427</id>
<content type='text'>
commit 84eb2ae1807dd1467bf6f500fc69ae61f1907b75 upstream.

The Fujitsu Lifebook UH552/UH572 ships with a Qualcomm AR9462/AR3012
WLAN/BT-Combo card.
Add device ID to the ath3k driver to enable the bluetooth side of things.
Patch against v3.10.

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04c5 ProdID=1330 Rev=00.02
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: Thomas Loo &lt;tloo@saltstorm.net&gt;
Signed-off-by: Gustavo Padovan &lt;gustavo.padovan@collabora.co.uk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>Bluetooth: btmrvl: fix thread stopping race</title>
<updated>2013-06-13T17:05:40Z</updated>
<author>
<name>Daniel Drake</name>
<email>dsd@laptop.org</email>
</author>
<published>2013-06-11T19:40:20Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=ea05fea9042620ac3b8ab9a3e5e4d2ed80c89244'/>
<id>urn:sha1:ea05fea9042620ac3b8ab9a3e5e4d2ed80c89244</id>
<content type='text'>
There is currently a race condition in the btmrvl_remove_card() which
is causing hangs on suspend for OLPC. When the race occurs,
kthread_stop() never returns.

The problem is that btmrvl_service_main_thread() calls kthread_should_stop()
and then does a fair number of things before restarting the loop and
sleeping.

If the thread gets stopped after kthread_should_stop() is checked, but
before the sleep happens, the thread will go to sleep and won't necessarily
be woken up.

Move the kthread_should_stop() check into a race-free place.

Signed-off-by: Daniel Drake &lt;dsd@laptop.org&gt;
Signed-off-by: Gustavo Padovan &lt;gustavo.padovan@collabora.co.uk&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
</entry>
<entry>
<title>Bluetooth: btmrvl: support Marvell Bluetooth device SD8897</title>
<updated>2013-06-12T14:20:54Z</updated>
<author>
<name>Bing Zhao</name>
<email>bzhao@marvell.com</email>
</author>
<published>2013-05-14T01:15:32Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=22f2efed35e02a7c0b1ec73cfe790b1e3d207f4b'/>
<id>urn:sha1:22f2efed35e02a7c0b1ec73cfe790b1e3d207f4b</id>
<content type='text'>
The register offsets have been changed in SD8897 and newer chips.
Define a new btmrvl_sdio_card_reg map for SD88xx.

Signed-off-by: Bing Zhao &lt;bzhao@marvell.com&gt;
Signed-off-by: Frank Huang &lt;frankh@marvell.com&gt;
Signed-off-by: Gustavo Padovan &lt;gustavo.padovan@collabora.co.uk&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
</entry>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next</title>
<updated>2013-05-01T21:08:52Z</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-05-01T21:08:52Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=73287a43cc79ca06629a88d1a199cd283f42456a'/>
<id>urn:sha1:73287a43cc79ca06629a88d1a199cd283f42456a</id>
<content type='text'>
Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...
</content>
</entry>
</feed>
