user/sven/linux.git/drivers/bluetooth, branch v4.13.10

Bluetooth: Add support of 13d3:3494 RTL8723BE device

2017-09-09T15:39:24Z

commit a81d72d2002d6a932bd83022cbf8c442b1b97512 upstream. T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3494 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Dmitry Tunin Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2017-07-05T19:31:59Z

Pull networking updates from David Miller: "Reasonably busy this cycle, but perhaps not as busy as in the 4.12 merge window: 1) Several optimizations for UDP processing under high load from Paolo Abeni. 2) Support pacing internally in TCP when using the sch_fq packet scheduler for this is not practical. From Eric Dumazet. 3) Support mutliple filter chains per qdisc, from Jiri Pirko. 4) Move to 1ms TCP timestamp clock, from Eric Dumazet. 5) Add batch dequeueing to vhost_net, from Jason Wang. 6) Flesh out more completely SCTP checksum offload support, from Davide Caratti. 7) More plumbing of extended netlink ACKs, from David Ahern, Pablo Neira Ayuso, and Matthias Schiffer. 8) Add devlink support to nfp driver, from Simon Horman. 9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa Prabhu. 10) Add stack depth tracking to BPF verifier and use this information in the various eBPF JITs. From Alexei Starovoitov. 11) Support XDP on qed device VFs, from Yuval Mintz. 12) Introduce BPF PROG ID for better introspection of installed BPF programs. From Martin KaFai Lau. 13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann. 14) For loads, allow narrower accesses in bpf verifier checking, from Yonghong Song. 15) Support MIPS in the BPF selftests and samples infrastructure, the MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David Daney. 16) Support kernel based TLS, from Dave Watson and others. 17) Remove completely DST garbage collection, from Wei Wang. 18) Allow installing TCP MD5 rules using prefixes, from Ivan Delalande. 19) Add XDP support to Intel i40e driver, from Björn Töpel 20) Add support for TC flower offload in nfp driver, from Simon Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub Kicinski, and Bert van Leeuwen. 21) IPSEC offloading support in mlx5, from Ilan Tayari. 22) Add HW PTP support to macb driver, from Rafal Ozieblo. 23) Networking refcount_t conversions, From Elena Reshetova. 24) Add sock_ops support to BPF, from Lawrence Brako. This is useful for tuning the TCP sockopt settings of a group of applications, currently via CGROUPs" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits) net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap cxgb4: Support for get_ts_info ethtool method cxgb4: Add PTP Hardware Clock (PHC) support cxgb4: time stamping interface for PTP nfp: default to chained metadata prepend format nfp: remove legacy MAC address lookup nfp: improve order of interfaces in breakout mode net: macb: remove extraneous return when MACB_EXT_DESC is defined bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case bpf: fix return in load_bpf_file mpls: fix rtm policy in mpls_getroute net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t net, ax25: convert ax25_route.refcount from atomic_t to refcount_t net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t ...

Bluetooth: btbcm: Add entry for BCM43430 UART bluetooth

2017-06-29T12:39:42Z

This patch adds the device ID for the bluetooth chip used in the Broadcom BCM43430 SDIO WiFi / UART BT chip. Successfully tested using Firmware version 0x0182 Signed-off-by: Ian Molton Reported-by: Loic Poulain Signed-off-by: Marcel Holtmann

Bluetooth: hci_bcm: Add active_low irq polarity quirk for Asus T100CHI

2017-06-29T12:35:25Z

Just like the T100TA the host-wake irq on the Asus T100CHI is active low. Having a quirk for this is actually extra important on the T100CHI as it ships with a bluetooth keyboard dock, which does not work properly without this quirk. Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann

Bluetooth: hci_bcm: Fix unwanted error reporting if no bcm dev

2017-06-27T17:28:11Z

The hci_bcm proto is able to operate without bcm platform device linked to its uart port. In that case, firmware can be applied, but there is no power operation (no gpio/irq resources mgmt). However, the current implementation breaks this use case because of reporting a ENODEV error in the bcm setup procedure if bcm_request_irq fails (which is the case if no bcm device linked). Fix this by removing bcm_request_irq error forwarding. Signed-off-by: Loic Poulain Reported-by: Ian Molton Signed-off-by: Marcel Holtmann

Bluetooth: hci_serdev: make hci_serdev_client_ops static

2017-06-23T08:49:11Z

The structure hci_serdev_client_ops does not need to be in global scope and is not modified, so make it static. Cleans up sparse warning: "symbol 'hci_serdev_client_ops' was not declared. Should it be static?" Signed-off-by: Colin Ian King Signed-off-by: Marcel Holtmann

sched/wait: Rename wait_queue_t => wait_queue_entry_t

2017-06-20T10:18:27Z

Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

networking: add and use skb_put_u8()

2017-06-16T15:48:40Z

Joe and Bjørn suggested that it'd be nicer to not have the cast in the fairly common case of doing *(u8 *)skb_put(skb, 1) = c; Add skb_put_u8() for this case, and use it across the code, using the following spatch: @@ expression SKB, C, S; typedef u8; identifier fn = {skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Note that due to the "S", the spatch isn't perfect, it should have checked that S is 1, but there's also places that use a sizeof expression like sizeof(var) or sizeof(u8) etc. Turns out that nobody ever did something like *(u8 *)skb_put(skb, 2) = c; which would be wrong anyway since the second byte wouldn't be initialized. Suggested-by: Joe Perches Suggested-by: Bjørn Mork Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

networking: make skb_push & __skb_push return void pointers

2017-06-16T15:48:40Z

It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

networking: make skb_pull & friends return void pointers

2017-06-16T15:48:39Z

It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) Signed-off-by: Johannes Berg Signed-off-by: David S. Miller