user/sven/linux.git/drivers/bluetooth, branch v4.17.13

Bluetooth: btusb: add ID for LiteOn 04ca:301a

2018-08-03T05:47:48Z

[ Upstream commit d666fc5479ad76a1bcbe6476d4997cea714bab2d ] Contains a QCA6174A chipset, with USB BT. Let's support loading firmware on it. >From usb-devices: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=301a Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Vic Wei Signed-off-by: Matthias Kaehlcke Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Add a new Realtek 8723DE ID 2ff8:b011

2018-08-03T05:47:42Z

[ Upstream commit 66d9975c5a7c40aa7e4bb0ec0b0c37ba1f190923 ] Without this patch we cannot turn on the Bluethooth adapter on ASUS E406MA. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2ff8 ProdID=b011 Rev= 2.00 S: Manufacturer=Realtek S: Product=802.11n WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Jian-Hong Pan Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_qca: Fix "Sleep inside atomic section" warning

2018-08-03T05:47:41Z

[ Upstream commit 9960521c44a5d828f29636ceac0600603ecbddbf ] This patch fixes the following warning during boot: do not call blocking ops when !TASK_RUNNING; state=1 set at [<(ptrval)>] qca_setup+0x194/0x750 [hci_uart] WARNING: CPU: 2 PID: 1878 at kernel/sched/core.c:6135 __might_sleep+0x7c/0x88 In qca_set_baudrate(), the current task state is set to TASK_UNINTERRUPTIBLE before going to sleep for 300ms. It was then restored to TASK_INTERRUPTIBLE. This patch sets the current task state back to TASK_RUNNING instead. Signed-off-by: Thierry Escande Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_qca: Avoid missing rampatch failure with userspace fw loader

2018-07-03T09:26:49Z

commit 7dc5fe0814c35ec4e7d2e8fa30abab72e0e6a172 upstream. AOSP use userspace firmware loader to load firmwares, which will return -EAGAIN in case qca/rampatch_00440302.bin is not found. Since there is no rampatch for dragonboard820c QCA controller revision, just make it work as is. CC: Loic Poulain CC: Nicolas Dechesne CC: Marcel Holtmann CC: Johan Hedberg CC: Stable Signed-off-by: Amit Pundir Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Add Dell XPS 13 9360 to btusb_needs_reset_resume_table

2018-04-30T08:56:04Z

The Dell XPS 13 9360 uses a QCA Rome chip which needs to be reset (and have its firmware reloaded) for bluetooth to work after suspend/resume. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Cc: stable@vger.kernel.org Cc: Garrett LeSage Reported-and-tested-by: Garrett LeSage Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann

Bluetooth: btusb: Only check needs_reset_resume DMI table for QCA rome chipsets

2018-04-30T08:50:45Z

Jeremy Cline correctly points out in rhbz#1514836 that a device where the QCA rome chipset needs the USB_QUIRK_RESET_RESUME quirk, may also ship with a different wifi/bt chipset in some configurations. If that is the case then we are needlessly penalizing those other chipsets with a reset-resume quirk, typically causing 0.4W extra power use because this disables runtime-pm. This commit moves the DMI table check to a btusb_check_needs_reset_resume() helper (so that we can easily also call it for other chipsets) and calls this new helper only for QCA_ROME chipsets for now. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Cc: stable@vger.kernel.org Cc: Jeremy Cline Suggested-by: Jeremy Cline Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann

Revert "Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174"

2018-04-30T08:49:05Z

Commit f44cb4b19ed4 ("Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174") is causing bluetooth to no longer work for several people, see: https://bugzilla.redhat.com/show_bug.cgi?id=1568911 So lets revert it for now and try to find another solution for devices which need the modified quirk. Cc: stable@vger.kernel.org Cc: Takashi Iwai Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann

Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME

2018-04-01T18:43:02Z

QCA Rome controllers can do both LE scan and BR/EDR inquiry at once. Signed-off-by: Vic Wei Signed-off-by: Marcel Holtmann

Bluetooth: btrsi: remove unused including

2018-04-01T18:43:02Z

Remove including that don't need it. Signed-off-by: Wei Yongjun Signed-off-by: Marcel Holtmann

Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4

2018-04-01T18:43:02Z

As Interrupt resource specified IRQs are now assumed to be always active-low the DMI quirk for the MINIX Z83-4 is no longer required. Signed-off-by: Ian W MORRISON Signed-off-by: Marcel Holtmann