user/sven/linux.git/drivers/bluetooth, branch v4.9.170

Revert "Bluetooth: h5: Fix missing dependency on BT_HCIUART_SERDEV"

2018-11-27T15:09:40Z

This reverts commit b5c98d8ca8f93a4f73e9cbb53c7e6b8c78ed3f80 which is commit 6c3711ec64fd23a9abc8aaf59a9429569a6282df upstream. You Ling writes that this config option isn't even in 4.9.y yet, so it causes a regression. Revert the patch because of this. Reported-by: youling 257 Cc: Johan Hedberg Cc: Marcel Holtmann Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: btbcm: Add entry for BCM4335C0 UART bluetooth

2018-11-13T19:16:50Z

[ Upstream commit a357ea098c9605f60d92a66a9073f56ce25726da ] This patch adds the device ID for the AMPAK AP6335 combo module used in the 1st generation WeTek Hub Android/LibreELEC HTPC box. The WiFI chip identifies itself as BCM4339, while Bluetooth identifies itself as BCM4335 (rev C0): ``` [ 4.864248] Bluetooth: hci0: BCM: chip id 86 [ 4.866388] Bluetooth: hci0: BCM: features 0x2f [ 4.889317] Bluetooth: hci0: BCM4335C0 [ 4.889332] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0000 [ 9.778383] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0268 ``` Output from hciconfig: ``` hci0: Type: Primary Bus: UART BD Address: 43:39:00:00:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:7567 acl:234 sco:0 events:386 errors:0 TX bytes:53844 acl:77 sco:0 commands:304 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'HUB' Class: 0x0c0000 Service Classes: Rendering, Capturing Device Class: Miscellaneous, HCI Version: 4.0 (0x6) Revision: 0x10c LMP Version: 4.0 (0x6) Subversion: 0x6109 Manufacturer: Broadcom Corporation (15) ``` Signed-off-by: Christian Hewitt Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: Add a new Realtek 8723DE ID 0bda:b009

2018-10-04T00:01:42Z

[ Upstream commit 45ae68b8cfc25bdbffc11248001c47ab1b76ff6e ] Without this patch we cannot turn on the Bluethooth adapter on HP 14-bs007la. T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b009 Rev= 2.00 S: Manufacturer=Realtek S: Product=802.11n WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Jian-Hong Pan Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: h5: Fix missing dependency on BT_HCIUART_SERDEV

2018-09-19T20:47:12Z

[ Upstream commit 6c3711ec64fd23a9abc8aaf59a9429569a6282df ] This driver was recently updated to use serdev, so add the appropriate dependency. Without this one can get compiler warnings like this if CONFIG_SERIAL_DEV_BUS is not enabled: CC [M] drivers/bluetooth/hci_h5.o drivers/bluetooth/hci_h5.c:934:36: warning: ‘h5_serdev_driver’ defined but not used [-Wunused-variable] static struct serdev_device_driver h5_serdev_driver = { ^~~~~~~~~~~~~~~~ Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Add a new Realtek 8723DE ID 2ff8:b011

2018-08-03T05:55:16Z

[ Upstream commit 66d9975c5a7c40aa7e4bb0ec0b0c37ba1f190923 ] Without this patch we cannot turn on the Bluethooth adapter on ASUS E406MA. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2ff8 ProdID=b011 Rev= 2.00 S: Manufacturer=Realtek S: Product=802.11n WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Jian-Hong Pan Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_qca: Fix "Sleep inside atomic section" warning

2018-08-03T05:55:15Z

[ Upstream commit 9960521c44a5d828f29636ceac0600603ecbddbf ] This patch fixes the following warning during boot: do not call blocking ops when !TASK_RUNNING; state=1 set at [<(ptrval)>] qca_setup+0x194/0x750 [hci_uart] WARNING: CPU: 2 PID: 1878 at kernel/sched/core.c:6135 __might_sleep+0x7c/0x88 In qca_set_baudrate(), the current task state is set to TASK_UNINTERRUPTIBLE before going to sleep for 300ms. It was then restored to TASK_INTERRUPTIBLE. This patch sets the current task state back to TASK_RUNNING instead. Signed-off-by: Thierry Escande Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_qca: Avoid missing rampatch failure with userspace fw loader

2018-07-03T09:23:07Z

commit 7dc5fe0814c35ec4e7d2e8fa30abab72e0e6a172 upstream. AOSP use userspace firmware loader to load firmwares, which will return -EAGAIN in case qca/rampatch_00440302.bin is not found. Since there is no rampatch for dragonboard820c QCA controller revision, just make it work as is. CC: Loic Poulain CC: Nicolas Dechesne CC: Marcel Holtmann CC: Johan Hedberg CC: Stable Signed-off-by: Amit Pundir Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Add device ID for RTL8822BE

2018-05-25T14:13:05Z

[ Upstream commit fed03fe7e55b7dc16077f672bd9d7bbe92b3a691 ] The Asus Z370-I contains a Realtek RTL8822BE device with an associated BT chip using a USB ID of 0b05:185c. This device is added to the driver. Signed-off-by: Hon Weng Chong Signed-off-by: Larry Finger Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Add USB ID 7392:a611 for Edimax EW-7611ULB

2018-05-25T14:13:02Z

[ Upstream commit a41e0796396eeceff673af4a38feaee149c6ff86 ] This WiFi/Bluetooth USB dongle uses a Realtek chipset, so, use btrtl for it. Product information: https://wikidevi.com/wiki/Edimax_EW-7611ULB >From /sys/kernel/debug/usb/devices T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=7392 ProdID=a611 Rev= 2.00 S: Manufacturer=Realtek S: Product=Edimax Wi-Fi N150 Bluetooth4.0 USB Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8723bu E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Tested-by: Vicente Bergas Signed-off-by: Vicente Bergas Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Revert "Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174"

2018-05-16T08:08:44Z

commit 544a591668813583021474fa5c7ff4942244d654 upstream. Commit f44cb4b19ed4 ("Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174") is causing bluetooth to no longer work for several people, see: https://bugzilla.redhat.com/show_bug.cgi?id=1568911 So lets revert it for now and try to find another solution for devices which need the modified quirk. Cc: stable@vger.kernel.org Cc: Takashi Iwai Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman