user/sven/linux.git/drivers/bluetooth, branch v5.4.133

Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.

2021-07-19T06:53:13Z

[ Upstream commit 4f00bfb372674d586c4a261bfc595cbce101fbb6 ] This is btsoc timing issue, after host start to downloading bt firmware, ep2 need time to switch from function acl to function dfu, so host add 20ms delay as workaround. Signed-off-by: Tim Jiang Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin

Bluetooth: btusb: Fixed too many in-token issue for Mediatek Chip.

2021-07-19T06:53:13Z

[ Upstream commit 8454ed9ff9647e31e061fb5eb2e39ce79bc5e960 ] This patch reduce in-token during download patch procedure. Don't submit urb for polling event before sending hci command. Signed-off-by: mark-yw.chen Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin

Bluetooth: hci_h5: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for btrtl

2021-03-07T11:20:44Z

[ Upstream commit 7f9f2c3f7d99b8ae773459c74ac5e99a0dd46db9 ] Realtek Bluetooth controllers can do both LE scan and BR/EDR inquiry at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk. Signed-off-by: Claire Chang Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin

Bluetooth: btusb: Fix memory leak in btusb_mtk_wmt_recv

2021-03-04T09:26:15Z

[ Upstream commit de71a6cb4bf24d8993b9ca90d1ddb131b60251a1 ] In btusb_mtk_wmt_recv if skb_clone fails, the alocated skb should be released. Omit the labels “err_out” and “err_free_skb” in this function implementation so that the desired exception handling code would be directly specified in the affected if branches. Fixes: a1c49c434e15 ("btusb: Add protocol support for MediaTek MT7668U USB devices") Signed-off-by: Jupeng Zhong Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin

Bluetooth: hci_uart: Fix a race for write_work scheduling

2021-03-04T09:26:11Z

[ Upstream commit afe0b1c86458f121b085271e4f3034017a90d4a3 ] In hci_uart_write_work, there is a loop/goto checking the value of HCI_UART_TX_WAKEUP. If HCI_UART_TX_WAKEUP is set again, it keeps trying hci_uart_dequeue; otherwise, it clears HCI_UART_SENDING and returns. In hci_uart_tx_wakeup, if HCI_UART_SENDING is already set, it sets HCI_UART_TX_WAKEUP, skips schedule_work and assumes the running/pending hci_uart_write_work worker will do hci_uart_dequeue properly. However, if the HCI_UART_SENDING check in hci_uart_tx_wakeup is done after the loop breaks, but before HCI_UART_SENDING is cleared in hci_uart_write_work, the schedule_work is skipped incorrectly. Fix this race by changing the order of HCI_UART_SENDING and HCI_UART_TX_WAKEUP modification. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: 82f5169bf3d3 ("Bluetooth: hci_uart: add serdev driver support library") Signed-off-by: Claire Chang Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin

Bluetooth: btqcomsmd: Fix a resource leak in error handling paths in the probe function

2021-03-04T09:26:11Z

[ Upstream commit 9a39a927be01d89e53f04304ab99a8761e08910d ] Some resource should be released in the error handling path of the probe function, as already done in the remove function. The remove function was fixed in commit 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg") Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Christophe JAILLET Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin

Bluetooth: revert: hci_h5: close serdev device and free hu in h5_close

2021-01-12T19:16:17Z

commit 5c3b5796866f85354a5ce76a28f8ffba0dcefc7e upstream. There have been multiple revisions of the patch fix the h5->rx_skb leak. Accidentally the first revision (which is buggy) and v5 have both been merged: v1 commit 70f259a3f427 ("Bluetooth: hci_h5: close serdev device and free hu in h5_close"); v5 commit 855af2d74c87 ("Bluetooth: hci_h5: fix memory leak in h5_close") The correct v5 makes changes slightly higher up in the h5_close() function, which allowed both versions to get merged without conflict. The changes from v1 unconditionally frees the h5 data struct, this is wrong because in the serdev enumeration case the memory is allocated in h5_serdev_probe() like this: h5 = devm_kzalloc(dev, sizeof(*h5), GFP_KERNEL); So its lifetime is tied to the lifetime of the driver being bound to the serdev and it is automatically freed when the driver gets unbound. In the serdev case the same h5 struct is re-used over h5_close() and h5_open() calls and thus MUST not be free-ed in h5_close(). The serdev_device_close() added to h5_close() is incorrect in the same way, serdev_device_close() is called on driver unbound too and also MUST no be called from h5_close(). This reverts the changes made by merging v1 of the patch, so that just the changes of the correct v5 remain. Cc: Anant Thazhemadam Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_h5: close serdev device and free hu in h5_close

2021-01-06T13:48:38Z

commit 70f259a3f4276b71db365b1d6ff1eab805ea6ec3 upstream. When h5_close() gets called, the memory allocated for the hu gets freed only if hu->serdev doesn't exist. This leads to a memory leak. So when h5_close() is requested, close the serdev device instance and free the memory allocated to the hu entirely instead. Fixes: https://syzkaller.appspot.com/bug?extid=6ce141c55b2f7aafd1c4 Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

Bluetooth: btmtksdio: Add the missed release_firmware() in mtk_setup_firmware()

2020-12-30T10:51:20Z

[ Upstream commit b73b5781a85c03113476f62346c390f0277baa4b ] mtk_setup_firmware() misses to call release_firmware() in an error path. Jump to free_fw to fix it. Fixes: 737cd06072a7 ("Bluetooth: btmtksdio: fix up firmware download sequence") Signed-off-by: Jing Xiangfeng Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg Signed-off-by: Sasha Levin

Bluetooth: btusb: Add the missed release_firmware() in btusb_mtk_setup_firmware()

2020-12-30T10:51:20Z

[ Upstream commit d1e9d232e1e60fa63df1b836ec3ecba5abd3fa9d ] btusb_mtk_setup_firmware() misses to call release_firmware() in an error path. Jump to err_release_fw to fix it. Fixes: f645125711c8 ("Bluetooth: btusb: fix up firmware download sequence") Signed-off-by: Jing Xiangfeng Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg Signed-off-by: Sasha Levin