user/sven/linux.git/drivers/bus, branch v3.16.2

bus/arm-cci: add dependency on OF && CPU_V7

2014-06-17T15:09:35Z

The arm-cci code uses device tree helpers for initialization that don't work on kernels built without CONFIG_OF. Further, it contains an inline assembly in cci_enable_port_for_self() that uses ARMv7 instructions and fails to build when targetting other ARM instruction set versions. This works around both issues by limiting the scope of the Kconfig symbol to platforms that can actually build this driver cleanly. Signed-off-by: Arnd Bergmann Acked-by: Lorenzo Pieralisi Cc: Shawn Guo

Merge tag 'drivers-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

2014-06-02T23:35:49Z

Pull ARM SoC driver changes from Olof Johansson: "SoC-near driver changes that we're merging through our tree. Mostly because they depend on other changes we have staged, but in some cases because the driver maintainers preferred that we did it this way. This contains a largeish cleanup series of the omap_l3_noc bus driver, cpuidle rework for Exynos, some reset driver conversions and a long branch of TI EDMA fixes and cleanups, with more to come next release. The TI EDMA cleanups is a shared branch with the dmaengine tree, with a handful of Davinci-specific fixes on top. After discussion at last year's KS (and some more on the mailing lists), we are here adding a drivers/soc directory. The purpose of this is to keep per-vendor shared code that's needed by different drivers but that doesn't fit into the MFD (nor drivers/platform) model. We expect to keep merging contents for this hierarchy through arm-soc so we can keep an eye on what the vendors keep adding here and not making it a free-for-all to shove in crazy stuff" * tag 'drivers-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM tty: serial: msm: Remove direct access to GSBI power: reset: keystone-reset: introduce keystone reset driver Documentation: dt: add bindings for keystone pll control controller Documentation: dt: add bindings for keystone reset driver soc: qcom: fix of_device_id table ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos ARM: EXYNOS: Move the driver to drivers/cpuidle directory ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c ARM: EXYNOS: Pass the AFTR callback to the platform_data ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier ARM: EXYNOS: Move the AFTR state function into pm.c ARM: EXYNOS: Encapsulate the AFTR code into a function ARM: EXYNOS: Disable cpuidle for exynos5440 ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle ARM: EXYNOS: Remove ifdef for scu_enable in pm ARM: EXYNOS: Move scu_enable in the cpu_pm notifier ARM: EXYNOS: Use the cpu_pm notifier for pm ...

Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

2014-06-02T23:15:12Z

Pull part one of ARM SoC updates from Olof Johansson: "A quite large set of SoC updates this cycle. In no particular order: - Multi-cluster power management for Samsung Exynos, adding support for big.LITTLE CPU switching on EXYNOS5 - SMP support for Marvell Armada 375 and 38x - SMP rework on Allwinner A31 - Xilinx Zynq support for SOC_BUS, big endian - Marvell orion5x platform cleanup, modernizing the implementation and moving to DT. - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so that their platform can be enabled in the same kernel binary as most of the other v7 platforms in the tree. \o/ The work isn't quite complete, there's some driver fixes still needed, but the basics now work. New SoC support added: - Freescale i.MX6SX - LSI Axxia AXM55xx SoCs - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800 - STi STIH407 plus a large set of various smaller updates for different platforms. I'm probably missing some important one here" * tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits) ARM: exynos: don't run exynos4 l2x0 setup on other platforms ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug ARM: EXYNOS: mcpm rename the power_down_finish ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC ARM: EXYNOS: Enable multi-platform build support ARM: EXYNOS: Consolidate Kconfig entries ARM: EXYNOS: Add support for EXYNOS5410 SoC ARM: EXYNOS: Support secondary CPU boot of Exynos3250 ARM: EXYNOS: Add Exynos3250 SoC ID ARM: EXYNOS: Add 5800 SoC support ARM: EXYNOS: initial board support for exynos5260 SoC clk: exynos5410: register clocks using common clock framework ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084 ARM: sunxi: allow building without reset controller Documentation: devicetree: arm: sort enable-method entries ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks ARM: dts: axxia: Add reset controller power: reset: Add Axxia system reset driver ARM: axxia: Adding defconfig for AXM55xx ...

Merge tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

2014-06-02T23:14:07Z

Pull ARM SoC cleanups from Olof Johansson: "Cleanups for 3.16. Among these are: - a bunch of misc cleanups for Broadcom platforms, mostly housekeeping - enabling Common Clock Framework on the older s3c24xx Samsung chipsets - cleanup of the Versatile Express system controller code, moving it to syscon - power management cleanups for OMAP platforms plus a handful of other cleanups across the place" * tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits) ARM: kconfig: allow PCI support to be selected with ARCH_MULTIPLATFORM clk: samsung: fix build error ARM: vexpress: refine dependencies for new code clk: samsung: clk-s3c2410-dlck: do not use PNAME macro as it declares __initdata cpufreq: exynos: Fix the compile error ARM: S3C24XX: move debug-macro.S into the common space ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro ARM: S3C24XX: trim down debug uart handling ARM: compressed/head.S: remove s3c24xx special case ARM: EXYNOS: Remove unnecessary inclusion of cpu.h ARM: EXYNOS: Migrate Exynos specific macros from plat to mach ARM: EXYNOS: Remove exynos_subsys registration ARM: EXYNOS: Remove duplicate lines in Makefile ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_ops ARM: OMAP3/OMAP4: PRM: add prm_features flags and add IO wakeup under it ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setup ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exit ARM: OMAP2+: PRCM: cleanup some header includes ...

Merge tag 'omap-for-v3.16/l3-noc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

2014-05-26T20:29:22Z

Merge "ARM: omap l3-noc bus driver changes for v3.16 merge window, resend" from Tony Lindgren: Improvments to omap l3-noc bus driver for v3.16 merge window to add support for am347x and dra7. * tag 'omap-for-v3.16/l3-noc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits) bus: omap_l3_noc: Add AM4372 interconnect error data bus: omap_l3_noc: Add DRA7 interconnect error data bus: omap_l3_noc: introduce concept of submodule bus: omap_l3_noc: Add information about the context of operation bus: omap_l3_noc: add information about the type of operation bus: omap_l3_noc: ignore masked out unclearable targets bus: omap_l3_noc: improve readability by using helper for slave event parsing bus: omap_l3_noc: make error reporting and handling common bus: omap_l3_noc: fix masterid detection bus: omap_l3_noc: convert flagmux information into a structure bus: omap_l3_noc: use of_match_data to pick up SoC information bus: omap_l3_noc: Add support for discountinous flag mux input numbers bus: omap_l3_noc: convert target information into a structure bus: omap_l3_noc: move L3 master data structure out bus: omap_l3_noc: un-obfuscate l3_targ address computation bus: omap_l3_noc: switch over to relaxed variants of readl/writel bus: omap_l3_noc: populate l3->dev and use it bus: omap_l3_noc: remove iclk from omap_l3 struct bus: omap_l3_noc: rename functions and data to omap_l3 bus: omap_l3_noc: Fix copyright information ... Signed-off-by: Olof Johansson

ARM: vexpress: refine dependencies for new code

2014-05-26T19:26:52Z

The versatile express changes for 3.16 introduced a number of build regressions for randconfig kernels by not tracking dependencies between the components right. This patch tries to rectify that: * the mach-vexpress code cannot link without the syscfg driver, which in turn needs MFD_VEXPRESS_SYSREG * various drivers call devm_regmap_init_vexpress_config(), which has to be exported so it can be used by loadable modules * the configuration bus uses OF DT helper functions that are not available to platforms disable CONFIG_OF * The sysreg driver exports GPIOs through gpiolib, which can be disabled on some platforms. * The clocksource code cannot be built on platforms that don't use modern timekeeping but rely on gettimeoffset. Signed-off-by: Arnd Bergmann

bus: add Broadcom GISB bus arbiter timeout/error handler

2014-05-23T22:58:39Z

This patch adds support for the Broadcom GISB arbiter bus timeout/error handler. GISB is a proprietary bus used by Broadcom Set Top Box System-on-a-chip devices (BCM7xxx) which allows multiple masters and clients to be interfaced with each other. The bus arbiter offers support for generating two interrupts towards the host CPU, thus allowing us to "catch" clock gated masters, or masters being volontarily blocked for powersaving purposes, or do general system troubleshooting. We also register a hook with the ARM fault exception handling to allow printing a more informative message than "imprecise external abort at 0x00000000" for instance. Signed-off-by: Florian Fainelli Signed-off-by: Arnd Bergmann

mfd: vexpress: Convert custom func API to regmap

2014-05-15T16:02:18Z

Components of the Versatile Express platform (configuration microcontrollers on motherboard and daughterboards in particular) talk to each other over a custom configuration bus. They provide miscellaneous functions (from clock generator control to energy sensors) which are represented as platform devices (and Device Tree nodes). The transactions on the bus can be generated by different "bridges" in the system, some of which are universal for the whole platform (for the price of high transfer latencies), others restricted to a subsystem (but much faster). Until now drivers for such functions were using custom "func" API, which is being replaced in this patch by regmap calls. This required: * a rework (and move to drivers/bus directory, as suggested by Samuel and Arnd) of the config bus core, which is much simpler now and uses device model infrastructure (class) to keep track of the bridges; non-DT case (soon to be retired anyway) is simply covered by a special device registration function * the new config-bus driver also takes over device population, so there is no need for special matching table for of_platform_populate nor "simple-bus" hack in the arm64 model dtsi file (relevant bindings documentation has been updated); this allows all the vexpress devices fit into normal device model, making it possible to remove plenty of early inits and other hacks in the near future * adaptation of the syscfg bridge implementation in the sysreg driver, again making it much simpler; there is a special case of the "energy" function spanning two registers, where they should be both defined in the tree now, but backward compatibility is maintained in the code * modification of the relevant drivers: * hwmon - just a straight-forward API change * power/reset driver - API change * regulator - API change plus error handling simplification * osc clock driver - this one required larger rework in order to turn in into a standard platform driver Signed-off-by: Pawel Moll Acked-by: Mark Brown Acked-by: Lee Jones Acked-by: Guenter Roeck Acked-by: Mike Turquette

bus: omap_l3_noc: Add AM4372 interconnect error data

2014-05-05T19:34:37Z

Add AM4372 information to handle L3 error. AM4372 has two clk domains 100f and 200s. Provide flagmux and data associated with it. NOTE: Timeout doesn't have STDERRLOG_MAIN register. And per hardware team, L3 timeout error cannot be cleared the normal way (by setting bit 31 in STDERRLOG_MAIN), instead it may be required to do system reset. L3 error handler can't help in such scenarios. Hence indicate timeout target offset as L3_TARGET_NOT_SUPPORTED as done for undocumented bits. Signed-off-by: Dave Gerlach Signed-off-by: Afzal Mohammed Signed-off-by: Sekhar Nori Signed-off-by: Nishanth Menon Acked-by: Santosh Shilimkar Acked-by: Peter Ujfalusi Tested-by: Darren Etheridge Tested-by: Sekhar Nori

bus: omap_l3_noc: Add DRA7 interconnect error data

2014-05-05T19:34:26Z

DRA7 is distinctly different from OMAP4 in terms of masters and clock domain organization. There two main clock domains which is divided as follows: <0x44000000 0x1000000> is clk1 and clk2 is the sub clock domain <0x45000000 0x1000> is clk3 Add all the data needed to handle L3 error handling on DRA7 devices and mark clk2 as subdomain and provide a compatible flag for functionality. Other than the data difference the hardware blocks involved are essentially the same. Signed-off-by: Rajendra Nayak [nm@ti.com: bugfixes and generic improvements, documentation] Signed-off-by: Nishanth Menon Acked-by: Santosh Shilimkar Acked-by: Peter Ujfalusi Tested-by: Darren Etheridge Tested-by: Sekhar Nori