user/sven/linux.git/drivers/char, branch v4.14.99

char/mwave: fix potential Spectre v1 vulnerability

2019-01-31T07:13:43Z

commit 701956d4018e5d5438570e39e8bda47edd32c489 upstream. ipcnum is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/char/mwave/mwavedd.c:299 mwave_ioctl() warn: potential spectre issue 'pDrvData->IPCs' [w] (local cap) Fix this by sanitizing ipcnum before using it to index pDrvData->IPCs. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Signed-off-by: Greg Kroah-Hartman

ipmi:ssif: Fix handling of multi-part return messages

2019-01-26T08:37:07Z

commit 7d6380cd40f7993f75c4bde5b36f6019237e8719 upstream. The block number was not being compared right, it was off by one when checking the response. Some statistics wouldn't be incremented properly in some cases. Check to see if that middle-part messages always have 31 bytes of data. Signed-off-by: Corey Minyard Cc: stable@vger.kernel.org # 4.4 Signed-off-by: Greg Kroah-Hartman

ipmi:pci: Blacklist a Realtek "IPMI" device

2019-01-26T08:37:07Z

commit bc48fa1b9d3b04106055b27078da824cd209865a upstream. Realtek has some sort of "Virtual" IPMI device on the PCI bus as a KCS controller, but whatever it is, it's not one. Ignore it if seen. [ Commit 13d0b35c (ipmi_si: Move PCI setup to another file) from Linux 4.15-rc1 has not been back ported, so the PCI code is still in `drivers/char/ipmi/ipmi_si_intf.c`, requiring to apply the commit manually. This fixes a 100 s boot delay on the HP EliteDesk 705 G4 MT with Linux 4.14.94. ] Reported-by: Chris Chiu Signed-off-by: Corey Minyard Tested-by: Daniel Drake Signed-off-by: Paul Menzel Signed-off-by: Greg Kroah-Hartman

tpm: tpm_i2c_nuvoton: use correct command duration for TPM 2.x

2019-01-09T16:14:53Z

commit 2ba5780ce30549cf57929b01d8cba6fe656e31c5 upstream. tpm_i2c_nuvoton calculated commands duration using TPM 1.x values via tpm_calc_ordinal_duration() also for TPM 2.x chips. Call tpm2_calc_ordinal_duration() for retrieving ordinal duration for TPM 2.X chips. Cc: stable@vger.kernel.org Cc: Nayna Jain Signed-off-by: Tomas Winkler Reviewed-by: Nayna Jain Tested-by: Nayna Jain (For TPM 2.0) Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: tpm_try_transmit() refactor error flow.

2019-01-09T16:14:52Z

commit 01f54664a4db0d612de0ece8e0022f21f9374e9b upstream. First, rename out_no_locality to out_locality for bailing out on both tpm_cmd_ready() and tpm_request_locality() failure. Second, ignore the return value of go_to_idle() as it may override the return value of the actual tpm operation, the go_to_idle() error will be caught on any consequent command. Last, fix the wrong 'goto out', that jumped back instead of forward. Cc: stable@vger.kernel.org Fixes: 627448e85c76 ("tpm: separate cmd_ready/go_idle from runtime_pm") Signed-off-by: Tomas Winkler Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: Restore functionality to xen vtpm driver.

2018-11-13T19:15:02Z

commit e487a0f52301293152a6f8c4e217f2a11dd808e3 upstream. Functionality of the xen-tpmfront driver was lost secondary to the introduction of xenbus multi-page support in commit ccc9d90a9a8b ("xenbus_client: Extend interface to support multi-page ring"). In this commit pointer to location of where the shared page address is stored was being passed to the xenbus_grant_ring() function rather then the address of the shared page itself. This resulted in a situation where the driver would attach to the vtpm-stubdom but any attempt to send a command to the stub domain would timeout. A diagnostic finding for this regression is the following error message being generated when the xen-tpmfront driver probes for a device: <3>vtpm vtpm-0: tpm_transmit: tpm_send: error -62 <3>vtpm vtpm-0: A TPM error (-62) occurred attempting to determine the timeouts This fix is relevant to all kernels from 4.1 forward which is the release in which multi-page xenbus support was introduced. Daniel De Graaf formulated the fix by code inspection after the regression point was located. Fixes: ccc9d90a9a8b ("xenbus_client: Extend interface to support multi-page ring") Signed-off-by: Dr. Greg Wettstein Signed-off-by: Greg Kroah-Hartman [boris: Updated commit message, added Fixes tag] Signed-off-by: Boris Ostrovsky Cc: stable@vger.kernel.org # v4.1+ Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated

2018-11-13T19:14:58Z

[ Upstream commit 0d6d0d62d9505a9816716aa484ebd0b04c795063 ] For TPM 1.2 chips the system setup utility allows to set the TPM device in one of the following states: * Active: Security chip is functional * Inactive: Security chip is visible, but is not functional * Disabled: Security chip is hidden and is not functional When choosing the "Inactive" state, the TPM 1.2 device is enumerated and registered, but sending TPM commands fail with either TPM_DEACTIVATED or TPM_DISABLED depending if the firmware deactivated or disabled the TPM. Since these TPM 1.2 error codes don't have special treatment, inactivating the TPM leads to a very noisy kernel log buffer that shows messages like the following: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: A TPM error (6) occurred attempting to read a pcr value tpm tpm0: TPM is disabled/deactivated (0x6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting to read a pcr value ima: No TPM chip found, activating TPM-bypass! (rc=6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED} return codes, since this is expected when the TPM 1.2 is set to Inactive. In that case the kernel log is cleaner and less confusing for users, i.e: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: TPM is disabled/deactivated (0x6) ima: No TPM chip found, activating TPM-bypass! (rc=6) Reported-by: Hans de Goede Signed-off-by: Javier Martinez Canillas Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ipmi: Fix timer race with module unload

2018-11-13T19:14:46Z

commit 0711e8c1b4572d076264e71b0002d223f2666ed7 upstream. Please note that below oops is from an older kernel, but the same race seems to be present in the upstream kernel too. ---8<--- The following panic was encountered during removing the ipmi_ssif module: [ 526.352555] Unable to handle kernel paging request at virtual address ffff000006923090 [ 526.360464] Mem abort info: [ 526.363257] ESR = 0x86000007 [ 526.366304] Exception class = IABT (current EL), IL = 32 bits [ 526.372221] SET = 0, FnV = 0 [ 526.375269] EA = 0, S1PTW = 0 [ 526.378405] swapper pgtable: 4k pages, 48-bit VAs, pgd = 000000008ae60416 [ 526.385185] [ffff000006923090] *pgd=000000bffcffe803, *pud=000000bffcffd803, *pmd=0000009f4731a003, *pte=0000000000000000 [ 526.396141] Internal error: Oops: 86000007 [#1] SMP [ 526.401008] Modules linked in: nls_iso8859_1 ipmi_devintf joydev input_leds ipmi_msghandler shpchp sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear i2c_smbus hid_generic usbhid uas hid usb_storage ast aes_ce_blk i2c_algo_bit aes_ce_cipher qede ttm crc32_ce ptp crct10dif_ce drm_kms_helper ghash_ce syscopyarea sha2_ce sysfillrect sysimgblt pps_core fb_sys_fops sha256_arm64 sha1_ce mpt3sas qed drm raid_class ahci scsi_transport_sas libahci gpio_xlp i2c_xlp9xx aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [last unloaded: ipmi_ssif] [ 526.468085] CPU: 125 PID: 0 Comm: swapper/125 Not tainted 4.15.0-35-generic #38~lp1775396+build.1 [ 526.476942] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL022 08/14/2018 [ 526.484932] pstate: 00400009 (nzcv daif +PAN -UAO) [ 526.489713] pc : 0xffff000006923090 [ 526.493198] lr : call_timer_fn+0x34/0x178 [ 526.497194] sp : ffff000009b0bdd0 [ 526.500496] x29: ffff000009b0bdd0 x28: 0000000000000082 [ 526.505796] x27: 0000000000000002 x26: ffff000009515188 [ 526.511096] x25: ffff000009515180 x24: ffff0000090f1018 [ 526.516396] x23: ffff000009519660 x22: dead000000000200 [ 526.521696] x21: ffff000006923090 x20: 0000000000000100 [ 526.526995] x19: ffff809eeb466a40 x18: 0000000000000000 [ 526.532295] x17: 000000000000000e x16: 0000000000000007 [ 526.537594] x15: 0000000000000000 x14: 071c71c71c71c71c [ 526.542894] x13: 0000000000000000 x12: 0000000000000000 [ 526.548193] x11: 0000000000000001 x10: ffff000009b0be88 [ 526.553493] x9 : 0000000000000000 x8 : 0000000000000005 [ 526.558793] x7 : ffff80befc1f8528 x6 : 0000000000000020 [ 526.564092] x5 : 0000000000000040 x4 : 0000000020001b20 [ 526.569392] x3 : 0000000000000000 x2 : ffff809eeb466a40 [ 526.574692] x1 : ffff000006923090 x0 : ffff809eeb466a40 [ 526.579992] Process swapper/125 (pid: 0, stack limit = 0x000000002eb50acc) [ 526.586854] Call trace: [ 526.589289] 0xffff000006923090 [ 526.592419] expire_timers+0xc8/0x130 [ 526.596070] run_timer_softirq+0xec/0x1b0 [ 526.600070] __do_softirq+0x134/0x328 [ 526.603726] irq_exit+0xc8/0xe0 [ 526.606857] __handle_domain_irq+0x6c/0xc0 [ 526.610941] gic_handle_irq+0x84/0x188 [ 526.614679] el1_irq+0xe8/0x180 [ 526.617822] cpuidle_enter_state+0xa0/0x328 [ 526.621993] cpuidle_enter+0x34/0x48 [ 526.625564] call_cpuidle+0x44/0x70 [ 526.629040] do_idle+0x1b8/0x1f0 [ 526.632256] cpu_startup_entry+0x2c/0x30 [ 526.636174] secondary_start_kernel+0x11c/0x130 [ 526.640694] Code: bad PC value [ 526.643800] ---[ end trace d020b0b8417c2498 ]--- [ 526.648404] Kernel panic - not syncing: Fatal exception in interrupt [ 526.654778] SMP: stopping secondary CPUs [ 526.658734] Kernel Offset: disabled [ 526.662211] CPU features: 0x5800c38 [ 526.665688] Memory Limit: none [ 526.668768] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Prevent mod_timer from arming a timer that was already removed by del_timer during module unload. Signed-off-by: Jan Glauber Cc: # 3.19 Signed-off-by: Corey Minyard Signed-off-by: Greg Kroah-Hartman

tpm: tpm_crb: relinquish locality on error path.

2018-11-04T13:52:44Z

[ Upstream commit 1fbad3028664e114d210dc65d768947a3a553eaa ] In crb_map_io() function, __crb_request_locality() is called prior to crb_cmd_ready(), but if one of the consecutive function fails the flow bails out instead of trying to relinquish locality. This patch adds goto jump to __crb_relinquish_locality() on the error path. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler Tested-by: Jarkko Sakkinen Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin

tpm: move the delay_msec increment after sleep in tpm_transmit()

2018-11-04T13:52:44Z

[ Upstream commit 92980756979a9c51be0275f395f4e89c42cf199a ] Commit e2fb992d82c6 ("tpm: add retry logic") introduced a new loop to handle the TPM2_RC_RETRY error. The loop retries the command after sleeping for the specified time, which is incremented exponentially in every iteration. Unfortunately, the loop doubles the time before sleeping, causing the initial sleep to be doubled. This patch fixes the initial sleep time. Fixes: commit e2fb992d82c6 ("tpm: add retry logic") Signed-off-by: Nayna Jain Reviewed-by: Mimi Zohar Tested-by: Jarkko Sakkinen Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin