user/sven/linux.git/drivers/char, branch v4.9.293

virtio_console: Assure used length from device is limited

2021-07-20T14:21:14Z

[ Upstream commit d00d8da5869a2608e97cfede094dfc5e11462a46 ] The buf->len might come from an untrusted device. This ensures the value would not exceed the size of the buffer to avoid data corruption or loss. Signed-off-by: Xie Yongji Acked-by: Jason Wang Link: https://lore.kernel.org/r/20210525125622.1203-1-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

ipmi/watchdog: Stop watchdog timer when the current action is 'none'

2021-07-20T14:21:09Z

commit 2253042d86f57d90a621ac2513a7a7a13afcf809 upstream. When an IPMI watchdog timer is being stopped in ipmi_close() or ipmi_ioctl(WDIOS_DISABLECARD), the current watchdog action is updated to WDOG_TIMEOUT_NONE and _ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB) is called to install this action. The latter function ends up invoking __ipmi_set_timeout() which makes the actual 'Set Watchdog Timer' IPMI request. For IPMI 1.0, this operation results in fully stopping the watchdog timer. For IPMI >= 1.5, function __ipmi_set_timeout() always specifies the "don't stop" flag in the prepared 'Set Watchdog Timer' IPMI request. This causes that the watchdog timer has its action correctly updated to 'none' but the timer continues to run. A problem is that IPMI firmware can then still log an expiration event when the configured timeout is reached, which is unexpected because the watchdog timer was requested to be stopped. The patch fixes this problem by not setting the "don't stop" flag in __ipmi_set_timeout() when the current action is WDOG_TIMEOUT_NONE which results in stopping the watchdog timer. This makes the behaviour for IPMI >= 1.5 consistent with IPMI 1.0. It also matches the logic in __ipmi_heartbeat() which does not allow to reset the watchdog if the current action is WDOG_TIMEOUT_NONE as that would start the timer. Signed-off-by: Petr Pavlu Message-Id: <10a41bdc-9c99-089c-8d89-fa98ce5ea080@suse.com> Cc: stable@vger.kernel.org Signed-off-by: Corey Minyard Signed-off-by: Greg Kroah-Hartman

char: pcmcia: error out if 'num_bytes_read' is greater than 4 in set_protocol()

2021-07-20T14:21:04Z

[ Upstream commit 37188559c610f1b7eec83c8e448936c361c578de ] Theoretically, it will cause index out of bounds error if 'num_bytes_read' is greater than 4. As we expect it(and was tested) never to be greater than 4, error out if it happens. Fixes: c1986ee9bea3 ("[PATCH] New Omnikey Cardman 4000 driver") Signed-off-by: Yu Kuai Link: https://lore.kernel.org/r/20210521120617.138396-1-yukuai3@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

char: hpet: add checks after calling ioremap

2021-06-03T06:23:31Z

[ Upstream commit b11701c933112d49b808dee01cb7ff854ba6a77a ] The function hpet_resources() calls ioremap() two times, but in both cases it does not check if ioremap() returned a null pointer. Fix this by adding null pointer checks and returning an appropriate error. Signed-off-by: Tom Seewald Link: https://lore.kernel.org/r/20210503115736.2104747-30-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

ttyprintk: Add TTY hangup callback.

2021-05-22T08:40:25Z

[ Upstream commit c0070e1e60270f6a1e09442a9ab2335f3eaeaad2 ] syzbot is reporting hung task due to flood of tty_warn(tty, "%s: tty->count = 1 port count = %d\n", __func__, port->count); message [1], for ioctl(TIOCVHANGUP) prevents tty_port_close() from decrementing port->count due to tty_hung_up_p() == true. ---------- #include #include #include #include #include int main(int argc, char *argv[]) { int i; int fd[10]; for (i = 0; i < 10; i++) fd[i] = open("/dev/ttyprintk", O_WRONLY); ioctl(fd[0], TIOCVHANGUP); for (i = 0; i < 10; i++) close(fd[i]); close(open("/dev/ttyprintk", O_WRONLY)); return 0; } ---------- When TTY hangup happens, port->count needs to be reset via "struct tty_operations"->hangup callback. [1] https://syzkaller.appspot.com/bug?id=39ea6caa479af471183997376dc7e90bc7d64a6a Reported-by: syzbot Reported-by: syzbot Tested-by: syzbot Signed-off-by: Tetsuo Handa Fixes: 24b4b67d17c308aa ("add ttyprintk driver") Link: https://lore.kernel.org/r/17e0652d-89b7-c8c0-fb53-e7566ac9add4@i-love.sakura.ne.jp Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

parisc: parisc-agp requires SBA IOMMU driver

2021-04-16T09:59:07Z

commit 9054284e8846b0105aad43a4e7174ca29fffbc44 upstream. Add a dependency to the SBA IOMMU driver to avoid: ERROR: modpost: "sba_list" [drivers/char/agp/parisc-agp.ko] undefined! Reported-by: kernel test robot Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

random: fix the RNDRESEEDCRNG ioctl

2021-03-03T16:44:32Z

commit 11a0b5e0ec8c13bef06f7414f9e914506140d5cb upstream. The RNDRESEEDCRNG ioctl reseeds the primary_crng from itself, which doesn't make sense. Reseed it from the input_pool instead. Fixes: d848e5f8e1eb ("random: add new ioctl RNDRESEEDCRNG") Cc: stable@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: Andy Lutomirski Cc: Jann Horn Cc: Theodore Ts'o Reviewed-by: Jann Horn Acked-by: Ard Biesheuvel Signed-off-by: Eric Biggers Link: https://lore.kernel.org/r/20210112192818.69921-1-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman

random32: make prandom_u32() output unpredictable

2020-11-18T17:26:29Z

commit c51f8f88d705e06bd696d7510aff22b33eb8e638 upstream. Non-cryptographic PRNGs may have great statistical properties, but are usually trivially predictable to someone who knows the algorithm, given a small sample of their output. An LFSR like prandom_u32() is particularly simple, even if the sample is widely scattered bits. It turns out the network stack uses prandom_u32() for some things like random port numbers which it would prefer are *not* trivially predictable. Predictability led to a practical DNS spoofing attack. Oops. This patch replaces the LFSR with a homebrew cryptographic PRNG based on the SipHash round function, which is in turn seeded with 128 bits of strong random key. (The authors of SipHash have *not* been consulted about this abuse of their algorithm.) Speed is prioritized over security; attacks are rare, while performance is always wanted. Replacing all callers of prandom_u32() is the quick fix. Whether to reinstate a weaker PRNG for uses which can tolerate it is an open question. Commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") was an earlier attempt at a solution. This patch replaces it. Reported-by: Amit Klein Cc: Willy Tarreau Cc: Eric Dumazet Cc: "Jason A. Donenfeld" Cc: Andy Lutomirski Cc: Kees Cook Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Linus Torvalds Cc: tytso@mit.edu Cc: Florian Westphal Cc: Marc Plumb Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Signed-off-by: George Spelvin Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ [ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions to prandom.h for later use; merged George's prandom_seed() proposal; inlined siprand_u32(); replaced the net_rand_state[] array with 4 members to fix a build issue; cosmetic cleanups to make checkpatch happy; fixed RANDOM32_SELFTEST build ] [wt: backported to 4.9 -- various context adjustments; timer API change] Signed-off-by: Willy Tarreau Signed-off-by: Greg Kroah-Hartman

drivers: char: tlclk.c: Avoid data race between init and interrupt handler

2020-10-01T18:40:12Z

[ Upstream commit 44b8fb6eaa7c3fb770bf1e37619cdb3902cca1fc ] After registering character device the file operation callbacks can be called. The open callback registers interrupt handler. Therefore interrupt handler can execute in parallel with rest of the init function. To avoid such data race initialize telclk_interrupt variable and struct alarm_events before registering character device. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Madhuparna Bhowmik Link: https://lore.kernel.org/r/20200417153451.1551-1-madhuparnabhowmik10@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

tpm: ibmvtpm: Wait for buffer to be set before proceeding

2020-10-01T18:40:09Z

[ Upstream commit d8d74ea3c00214aee1e1826ca18e77944812b9b4 ] Synchronize with the results from the CRQs before continuing with the initialization. This avoids trying to send TPM commands while the rtce buffer has not been allocated, yet. This patch fixes an existing race condition that may occurr if the hypervisor does not quickly respond to the VTPM_GET_RTCE_BUFFER_SIZE request sent during initialization and therefore the ibmvtpm->rtce_buf has not been allocated at the time the first TPM command is sent. Fixes: 132f76294744 ("drivers/char/tpm: Add new device driver to support IBM vTPM") Signed-off-by: Stefan Berger Acked-by: Nayna Jain Tested-by: Nayna Jain Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin