user/sven/linux.git/drivers/char, branch v4.9.306

char/mwave: Adjust io port register size

2022-01-27T07:47:35Z

[ Upstream commit f5912cc19acd7c24b2dbf65a6340bf194244f085 ] Using MKWORD() on a byte-sized variable results in OOB read. Expand the size of the reserved area so both MKWORD and MKBYTE continue to work without overflow. Silences this warning on a -Warray-bounds build: drivers/char/mwave/3780i.h:346:22: error: array subscript 'short unsigned int[0]' is partly outside array bounds of 'DSP_ISA_SLAVE_CONTROL[1]' [-Werror=array-bounds] 346 | #define MKWORD(var) (*((unsigned short *)(&var))) | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/char/mwave/3780i.h:356:40: note: in definition of macro 'OutWordDsp' 356 | #define OutWordDsp(index,value) outw(value,usDspBaseIO+index) | ^~~~~ drivers/char/mwave/3780i.c:373:41: note: in expansion of macro 'MKWORD' 373 | OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl)); | ^~~~~~ drivers/char/mwave/3780i.c:358:31: note: while referencing 'rSlaveControl' 358 | DSP_ISA_SLAVE_CONTROL rSlaveControl; | ^~~~~~~~~~~~~ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20211203084206.3104326-1-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

random: fix data race on crng init time

2022-01-27T07:47:31Z

commit 009ba8568be497c640cab7571f7bfd18345d7b24 upstream. _extract_crng() does plain loads of crng->init_time and crng_global_init_time, which causes undefined behavior if crng_reseed() and RNDRESEEDCRNG modify these corrently. Use READ_ONCE() and WRITE_ONCE() to make the behavior defined. Don't fix the race on crng->init_time by protecting it with crng->lock, since it's not a problem for duplicate reseedings to occur. I.e., the lockless access with READ_ONCE() is fine. Fixes: d848e5f8e1eb ("random: add new ioctl RNDRESEEDCRNG") Fixes: e192be9d9a30 ("random: replace non-blocking pool with a Chacha20-based CRNG") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Acked-by: Paul E. McKenney Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

random: fix data race on crng_node_pool

2022-01-27T07:47:31Z

commit 5d73d1e320c3fd94ea15ba5f79301da9a8bcc7de upstream. extract_crng() and crng_backtrack_protect() load crng_node_pool with a plain load, which causes undefined behavior if do_numa_crng_init() modifies it concurrently. Fix this by using READ_ONCE(). Note: as per the previous discussion https://lore.kernel.org/lkml/20211219025139.31085-1-ebiggers@kernel.org/T/#u, READ_ONCE() is believed to be sufficient here, and it was requested that it be used here instead of smp_load_acquire(). Also change do_numa_crng_init() to set crng_node_pool using cmpxchg_release() instead of mb() + cmpxchg(), as the former is sufficient here but is more lightweight. Fixes: 1e7f583af67b ("random: make /dev/urandom scalable for silly userspace programs") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Acked-by: Paul E. McKenney Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

parisc/agp: Annotate parisc agp init functions with __init

2021-12-22T08:05:13Z

[ Upstream commit 8d88382b7436551a9ebb78475c546b670790cbf6 ] Signed-off-by: Helge Deller Reported-by: kernel test robot Signed-off-by: Sasha Levin

virtio_console: Assure used length from device is limited

2021-07-20T14:21:14Z

[ Upstream commit d00d8da5869a2608e97cfede094dfc5e11462a46 ] The buf->len might come from an untrusted device. This ensures the value would not exceed the size of the buffer to avoid data corruption or loss. Signed-off-by: Xie Yongji Acked-by: Jason Wang Link: https://lore.kernel.org/r/20210525125622.1203-1-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

ipmi/watchdog: Stop watchdog timer when the current action is 'none'

2021-07-20T14:21:09Z

commit 2253042d86f57d90a621ac2513a7a7a13afcf809 upstream. When an IPMI watchdog timer is being stopped in ipmi_close() or ipmi_ioctl(WDIOS_DISABLECARD), the current watchdog action is updated to WDOG_TIMEOUT_NONE and _ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB) is called to install this action. The latter function ends up invoking __ipmi_set_timeout() which makes the actual 'Set Watchdog Timer' IPMI request. For IPMI 1.0, this operation results in fully stopping the watchdog timer. For IPMI >= 1.5, function __ipmi_set_timeout() always specifies the "don't stop" flag in the prepared 'Set Watchdog Timer' IPMI request. This causes that the watchdog timer has its action correctly updated to 'none' but the timer continues to run. A problem is that IPMI firmware can then still log an expiration event when the configured timeout is reached, which is unexpected because the watchdog timer was requested to be stopped. The patch fixes this problem by not setting the "don't stop" flag in __ipmi_set_timeout() when the current action is WDOG_TIMEOUT_NONE which results in stopping the watchdog timer. This makes the behaviour for IPMI >= 1.5 consistent with IPMI 1.0. It also matches the logic in __ipmi_heartbeat() which does not allow to reset the watchdog if the current action is WDOG_TIMEOUT_NONE as that would start the timer. Signed-off-by: Petr Pavlu Message-Id: <10a41bdc-9c99-089c-8d89-fa98ce5ea080@suse.com> Cc: stable@vger.kernel.org Signed-off-by: Corey Minyard Signed-off-by: Greg Kroah-Hartman

char: pcmcia: error out if 'num_bytes_read' is greater than 4 in set_protocol()

2021-07-20T14:21:04Z

[ Upstream commit 37188559c610f1b7eec83c8e448936c361c578de ] Theoretically, it will cause index out of bounds error if 'num_bytes_read' is greater than 4. As we expect it(and was tested) never to be greater than 4, error out if it happens. Fixes: c1986ee9bea3 ("[PATCH] New Omnikey Cardman 4000 driver") Signed-off-by: Yu Kuai Link: https://lore.kernel.org/r/20210521120617.138396-1-yukuai3@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

char: hpet: add checks after calling ioremap

2021-06-03T06:23:31Z

[ Upstream commit b11701c933112d49b808dee01cb7ff854ba6a77a ] The function hpet_resources() calls ioremap() two times, but in both cases it does not check if ioremap() returned a null pointer. Fix this by adding null pointer checks and returning an appropriate error. Signed-off-by: Tom Seewald Link: https://lore.kernel.org/r/20210503115736.2104747-30-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

ttyprintk: Add TTY hangup callback.

2021-05-22T08:40:25Z

[ Upstream commit c0070e1e60270f6a1e09442a9ab2335f3eaeaad2 ] syzbot is reporting hung task due to flood of tty_warn(tty, "%s: tty->count = 1 port count = %d\n", __func__, port->count); message [1], for ioctl(TIOCVHANGUP) prevents tty_port_close() from decrementing port->count due to tty_hung_up_p() == true. ---------- #include #include #include #include #include int main(int argc, char *argv[]) { int i; int fd[10]; for (i = 0; i < 10; i++) fd[i] = open("/dev/ttyprintk", O_WRONLY); ioctl(fd[0], TIOCVHANGUP); for (i = 0; i < 10; i++) close(fd[i]); close(open("/dev/ttyprintk", O_WRONLY)); return 0; } ---------- When TTY hangup happens, port->count needs to be reset via "struct tty_operations"->hangup callback. [1] https://syzkaller.appspot.com/bug?id=39ea6caa479af471183997376dc7e90bc7d64a6a Reported-by: syzbot Reported-by: syzbot Tested-by: syzbot Signed-off-by: Tetsuo Handa Fixes: 24b4b67d17c308aa ("add ttyprintk driver") Link: https://lore.kernel.org/r/17e0652d-89b7-c8c0-fb53-e7566ac9add4@i-love.sakura.ne.jp Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

parisc: parisc-agp requires SBA IOMMU driver

2021-04-16T09:59:07Z

commit 9054284e8846b0105aad43a4e7174ca29fffbc44 upstream. Add a dependency to the SBA IOMMU driver to avoid: ERROR: modpost: "sba_list" [drivers/char/agp/parisc-agp.ko] undefined! Reported-by: kernel test robot Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman