user/sven/linux.git/drivers/char, branch v6.1.41

hwrng: imx-rngc - fix the timeout for init and self check

2023-07-23T11:49:35Z

commit d744ae7477190967a3ddc289e2cd4ae59e8b1237 upstream. Fix the timeout that is used for the initialisation and for the self test. wait_for_completion_timeout expects a timeout in jiffies, but RNGC_TIMEOUT is in milliseconds. Call msecs_to_jiffies to do the conversion. Cc: stable@vger.kernel.org Fixes: 1d5449445bd0 ("hwrng: mx-rngc - add a driver for Freescale RNGC") Signed-off-by: Martin Kaiser Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

tpm: return false from tpm_amd_is_rng_defective on non-x86 platforms

2023-07-23T11:49:31Z

commit ecff6813d2bcf0c670881a9ba3f51cb032dd405a upstream. tpm_amd_is_rng_defective is for dealing with an issue related to the AMD firmware TPM, so on non-x86 architectures just have it inline and return false. Cc: stable@vger.kernel.org # v6.3+ Reported-by: Sachin Sant Reported-by: Aneesh Kumar K. V Closes: https://lore.kernel.org/lkml/99B81401-DB46-49B9-B321-CF832B50CAC3@linux.ibm.com/ Fixes: f1324bbc4011 ("tpm: disable hwrng for fTPM on some AMD designs") Signed-off-by: Jerry Snitselaar Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: tis_i2c: Limit write bursts to I2C_SMBUS_BLOCK_MAX (32) bytes

2023-07-23T11:49:31Z

commit 83e7e5d89f04d1c417492940f7922bc8416a8cc4 upstream. Underlying I2C bus drivers not always support longer transfers and imx-lpi2c for instance doesn't. The fix is symmetric to previous patch which fixed the read direction. Cc: stable@vger.kernel.org # v5.20+ Fixes: bbc23a07b072 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core") Tested-by: Michael Haener Signed-off-by: Alexander Sverdlin Reviewed-by: Jarkko Sakkinen Reviewed-by: Jerry Snitselaar Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: tis_i2c: Limit read bursts to I2C_SMBUS_BLOCK_MAX (32) bytes

2023-07-23T11:49:31Z

commit f3b70b6e3390bfdf18fdd7d278a72a12784fdcce upstream. Underlying I2C bus drivers not always support longer transfers and imx-lpi2c for instance doesn't. SLB 9673 offers 427-bytes packets. Visible symptoms are: tpm tpm0: Error left over data tpm tpm0: tpm_transmit: tpm_recv: error -5 tpm_tis_i2c: probe of 1-002e failed with error -5 Cc: stable@vger.kernel.org # v5.20+ Fixes: bbc23a07b072 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core") Tested-by: Michael Haener Signed-off-by: Alexander Sverdlin Reviewed-by: Jarkko Sakkinen Reviewed-by: Jerry Snitselaar Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: tpm_vtpm_proxy: fix a race condition in /dev/vtpmx creation

2023-07-23T11:49:31Z

commit f4032d615f90970d6c3ac1d9c0bce3351eb4445c upstream. /dev/vtpmx is made visible before 'workqueue' is initialized, which can lead to a memory corruption in the worst case scenario. Address this by initializing 'workqueue' as the very first step of the driver initialization. Cc: stable@vger.kernel.org Fixes: 6f99612e2500 ("tpm: Proxy driver for supporting multiple emulated TPMs") Reviewed-by: Stefan Berger Signed-off-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: Do not remap from ACPI resources again for Pluton TPM

2023-07-23T11:49:31Z

commit b1c1b98962d17a922989aa3b2822946bbb5c091f upstream. For Pluton TPM devices, it was assumed that there was no ACPI memory regions. This is not true for ASUS ROG Ally. ACPI advertises 0xfd500000-0xfd5fffff. Since remapping is already done in `crb_map_pluton`, remapping again in `crb_map_io` causes EBUSY error: [ 3.510453] tpm_crb MSFT0101:00: can't request region for resource [mem 0xfd500000-0xfd5fffff] [ 3.510463] tpm_crb: probe of MSFT0101:00 failed with error -16 Cc: stable@vger.kernel.org # v6.3+ Fixes: 4d2732882703 ("tpm_crb: Add support for CRB devices based on Pluton") Signed-off-by: Valentin David Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

hwrng: st - keep clock enabled while hwrng is registered

2023-07-19T14:21:44Z

[ Upstream commit 501e197a02d4aef157f53ba3a0b9049c3e52fedc ] The st-rng driver uses devres to register itself with the hwrng core, the driver will be unregistered from hwrng when its device goes out of scope. This happens after the driver's remove function is called. However, st-rng's clock is disabled in the remove function. There's a short timeframe where st-rng is still registered with the hwrng core although its clock is disabled. I suppose the clock must be active to access the hardware and serve requests from the hwrng core. Switch to devm_clk_get_enabled and let devres disable the clock and unregister the hwrng. This avoids the race condition. Fixes: 3e75241be808 ("hwrng: drivers - Use device-managed registration API") Signed-off-by: Martin Kaiser Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin

hwrng: virtio - Fix race on data_avail and actual data

2023-07-19T14:21:41Z

[ Upstream commit ac52578d6e8d300dd50f790f29a24169b1edd26c ] The virtio rng device kicks off a new entropy request whenever the data available reaches zero. When a new request occurs at the end of a read operation, that is, when the result of that request is only needed by the next reader, then there is a race between the writing of the new data and the next reader. This is because there is no synchronisation whatsoever between the writer and the reader. Fix this by writing data_avail with smp_store_release and reading it with smp_load_acquire when we first enter read. The subsequent reads are safe because they're either protected by the first load acquire, or by the completion mechanism. Also remove the redundant zeroing of data_idx in random_recv_done (data_idx must already be zero at this point) and data_avail in request_entropy (ditto). Reported-by: syzbot+726dc8c62c3536431ceb@syzkaller.appspotmail.com Fixes: f7f510ec1957 ("virtio: An entropy device, as suggested by hpa.") Signed-off-by: Herbert Xu Acked-by: Michael S. Tsirkin Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin

tpm_crb: Add support for CRB devices based on Pluton

2023-06-28T09:12:17Z

commit 4d2732882703791ea4b670df433f88fc4b40a5cb upstream. Pluton is an integrated security processor present in some recent Ryzen parts. If it's enabled, it presents two devices - an MSFT0101 ACPI device that's broadly an implementation of a Command Response Buffer TPM2, and an MSFT0200 ACPI device whose functionality I haven't examined in detail yet. This patch only attempts to add support for the TPM device. There's a few things that need to be handled here. The first is that the TPM2 ACPI table uses a previously undefined start method identifier. The table format appears to include 16 bytes of startup data, which corresponds to one 64-bit address for a start message and one 64-bit address for a completion response. The second is that the ACPI tables on the Thinkpad Z13 I'm testing this on don't define any memory windows in _CRS (or, more accurately, there are two empty memory windows). This check doesn't seem strictly necessary, so I've skipped that. Finally, it seems like chip needs to be explicitly asked to transition into ready status on every command. Failing to do this means that if two commands are sent in succession without an idle/ready transition in between, everything will appear to work fine but the response is simply the original command. I'm working without any docs here, so I'm not sure if this is actually the required behaviour or if I'm missing something somewhere else, but doing this results in the chip working reliably. Reviewed-by: Jarkko Sakkinen Signed-off-by: Matthew Garrett Signed-off-by: Jarkko Sakkinen Cc: "Limonciello, Mario" Signed-off-by: Greg Kroah-Hartman

tpm, tpm_tis: Claim locality in interrupt handler

2023-06-28T09:12:17Z

commit 0e069265bce5a40c4eee52e2364bbbd4dabee94a upstream. Writing the TPM_INT_STATUS register in the interrupt handler to clear the interrupts only has effect if a locality is held. Since this is not guaranteed at the time the interrupt is fired, claim the locality explicitly in the handler. Signed-off-by: Lino Sanfilippo Tested-by: Michael Niewöhner Tested-by: Jarkko Sakkinen Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman