user/sven/linux.git/drivers/char, branch v6.6.92

tpm: tis: Double the timeout B to 4s

2025-05-22T12:12:12Z

[ Upstream commit 2f661f71fda1fc0c42b7746ca5b7da529eb6b5be ] With some Infineon chips the timeouts in tpm_tis_send_data (both B and C) can reach up to about 2250 ms. Timeout C is retried since commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices") Timeout B still needs to be extended. The problem is most commonly encountered with context related operation such as load context/save context. These are issued directly by the kernel, and there is no retry logic for them. When a filesystem is set up to use the TPM for unlocking the boot fails, and restarting the userspace service is ineffective. This is likely because ignoring a load context/save context result puts the real TPM state and the TPM state expected by the kernel out of sync. Chips known to be affected: tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54) Description: SLB9672 Firmware Revision: 15.22 tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22) Firmware Revision: 7.83 tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16) Firmware Revision: 5.63 Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/ Signed-off-by: Michal Suchanek Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin

char: misc: register chrdev region with all possible minors

2025-05-02T05:50:49Z

commit c876be906ce7e518d9ef9926478669c151999e69 upstream. register_chrdev will only register the first 256 minors of a major chrdev. That means that dynamically allocated misc devices with minor above 255 will fail to open with -ENXIO. This was found by kernel test robot when testing a different change that makes all dynamically allocated minors be above 255. This has, however, been separately tested by creating 256 serio_raw devices with the help of userio driver. Ever since allowing misc devices with minors above 128, this has been possible. Fix it by registering all minor numbers from 0 to MINORMASK + 1 for MISC_MAJOR. Reported-by: kernel test robot Cc: stable Closes: https://lore.kernel.org/oe-lkp/202503171507.6c8093d0-lkp@intel.com Fixes: ab760791c0cf ("char: misc: Increase the maximum number of dynamic misc devices to 1048448") Signed-off-by: Thadeu Lima de Souza Cascardo Tested-by: Hou Wenlong Link: https://lore.kernel.org/r/20250317-misc-chrdev-v1-1-6cd05da11aef@igalia.com Signed-off-by: Greg Kroah-Hartman

virtio_console: fix missing byte order handling for cols and rows

2025-05-02T05:50:45Z

commit fbd3039a64b01b769040677c4fc68badeca8e3b2 upstream. As per virtio spec the fields cols and rows are specified as little endian. Although there is no legacy interface requirement that would state that cols and rows need to be handled as native endian when legacy interface is used, unlike for the fields of the adjacent struct virtio_console_control, I decided to err on the side of caution based on some non-conclusive virtio spec repo archaeology and opt for using virtio16_to_cpu() much like for virtio_console_control.event. Strictly by the letter of the spec virtio_le_to_cpu() would have been sufficient. But when the legacy interface is not used, it boils down to the same. And when using the legacy interface, the device formatting these as little endian when the guest is big endian would surprise me more than it using guest native byte order (which would make it compatible with the current implementation). Nevertheless somebody trying to implement the spec following it to the letter could end up forcing little endian byte order when the legacy interface is in use. So IMHO this ultimately needs a judgement call by the maintainers. Fixes: 8345adbf96fc1 ("virtio: console: Accept console size along with resize control message") Signed-off-by: Halil Pasic Cc: stable@vger.kernel.org # v2.6.35+ Message-Id: <20250322002954.3129282-1-pasic@linux.ibm.com> Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman

tpm: do not start chip while suspended

2025-04-25T08:45:27Z

commit 17d253af4c2c8a2acf84bb55a0c2045f150b7dfd upstream. Checking TPM_CHIP_FLAG_SUSPENDED after the call to tpm_find_get_ops() can lead to a spurious tpm_chip_start() call: [35985.503771] i2c i2c-1: Transfer while suspended [35985.503796] WARNING: CPU: 0 PID: 74 at drivers/i2c/i2c-core.h:56 __i2c_transfer+0xbe/0x810 [35985.503802] Modules linked in: [35985.503808] CPU: 0 UID: 0 PID: 74 Comm: hwrng Tainted: G W 6.13.0-next-20250203-00005-gfa0cb5642941 #19 9c3d7f78192f2d38e32010ac9c90fdc71109ef6f [35985.503814] Tainted: [W]=WARN [35985.503817] Hardware name: Google Morphius/Morphius, BIOS Google_Morphius.13434.858.0 10/26/2023 [35985.503819] RIP: 0010:__i2c_transfer+0xbe/0x810 [35985.503825] Code: 30 01 00 00 4c 89 f7 e8 40 fe d8 ff 48 8b 93 80 01 00 00 48 85 d2 75 03 49 8b 16 48 c7 c7 0a fb 7c a7 48 89 c6 e8 32 ad b0 fe <0f> 0b b8 94 ff ff ff e9 33 04 00 00 be 02 00 00 00 83 fd 02 0f 5 [35985.503828] RSP: 0018:ffffa106c0333d30 EFLAGS: 00010246 [35985.503833] RAX: 074ba64aa20f7000 RBX: ffff8aa4c1167120 RCX: 0000000000000000 [35985.503836] RDX: 0000000000000000 RSI: ffffffffa77ab0e4 RDI: 0000000000000001 [35985.503838] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [35985.503841] R10: 0000000000000004 R11: 00000001000313d5 R12: ffff8aa4c10f1820 [35985.503843] R13: ffff8aa4c0e243c0 R14: ffff8aa4c1167250 R15: ffff8aa4c1167120 [35985.503846] FS: 0000000000000000(0000) GS:ffff8aa4eae00000(0000) knlGS:0000000000000000 [35985.503849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [35985.503852] CR2: 00007fab0aaf1000 CR3: 0000000105328000 CR4: 00000000003506f0 [35985.503855] Call Trace: [35985.503859] [35985.503863] ? __warn+0xd4/0x260 [35985.503868] ? __i2c_transfer+0xbe/0x810 [35985.503874] ? report_bug+0xf3/0x210 [35985.503882] ? handle_bug+0x63/0xb0 [35985.503887] ? exc_invalid_op+0x16/0x50 [35985.503892] ? asm_exc_invalid_op+0x16/0x20 [35985.503904] ? __i2c_transfer+0xbe/0x810 [35985.503913] tpm_cr50_i2c_transfer_message+0x24/0xf0 [35985.503920] tpm_cr50_i2c_read+0x8e/0x120 [35985.503928] tpm_cr50_request_locality+0x75/0x170 [35985.503935] tpm_chip_start+0x116/0x160 [35985.503942] tpm_try_get_ops+0x57/0x90 [35985.503948] tpm_find_get_ops+0x26/0xd0 [35985.503955] tpm_get_random+0x2d/0x80 Don't move forward with tpm_chip_start() inside tpm_try_get_ops(), unless TPM_CHIP_FLAG_SUSPENDED is not set. tpm_find_get_ops() will return NULL in such a failure case. Fixes: 9265fed6db60 ("tpm: Lock TPM chip in tpm_pm_suspend() first") Signed-off-by: Thadeu Lima de Souza Cascardo Cc: stable@vger.kernel.org Cc: Jerry Snitselaar Cc: Mike Seo Cc: Jarkko Sakkinen Reviewed-by: Jerry Snitselaar Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm, tpm_tis: Fix timeout handling when waiting for TPM status

2025-04-25T08:45:23Z

commit 7146dffa875cd00e7a7f918e1fce79c7593ac1fa upstream. The change to only use interrupts to handle supported status changes introduced an issue when it is necessary to poll for the status. Rather than checking for the status after sleeping the code now sleeps after the check. This means a correct, but slower, status change on the part of the TPM can be missed, resulting in a spurious timeout error, especially on a more loaded system. Switch back to sleeping *then* checking. An up front check of the status has been done at the start of the function, so this does not cause an additional delay when the status is already what we're looking for. Cc: stable@vger.kernel.org # v6.4+ Fixes: e87fcf0dc2b4 ("tpm, tpm_tis: Only handle supported interrupts") Signed-off-by: Jonathan McDowell Reviewed-by: Michal Suchánek Reviewed-by: Lino Sanfilippo Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm, tpm_tis: Workaround failed command reception on Infineon devices

2025-04-25T08:45:20Z

[ Upstream commit de9e33df7762abbfc2a1568291f2c3a3154c6a9d ] Some Infineon devices have a issue where the status register will get stuck with a quick REQUEST_USE / COMMAND_READY sequence. This is not simply a matter of requiring a longer timeout; the work around is to retry the command submission. Add appropriate logic to do this in the send path. This is fixed in later firmware revisions, but those are not always available, and cannot generally be easily updated from outside a firmware environment. Testing has been performed with a simple repeated loop of doing a TPM2_CC_GET_CAPABILITY for TPM_CAP_PROP_MANUFACTURER using the Go code at: https://the.earth.li/~noodles/tpm-stuff/timeout-reproducer-simple.go It can take several hours to reproduce, and several million operations. Signed-off-by: Jonathan McDowell Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin

char: misc: deallocate static minor in error path

2025-03-13T11:58:37Z

commit 6d991f569c5ef6eaeadf1238df2c36e3975233ad upstream. When creating sysfs files fail, the allocated minor must be freed such that it can be later reused. That is specially harmful for static minor numbers, since those would always fail to register later on. Fixes: 6d04d2b554b1 ("misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minors") Cc: stable Signed-off-by: Thadeu Lima de Souza Cascardo Link: https://lore.kernel.org/r/20250123123249.4081674-5-cascardo@igalia.com Signed-off-by: Greg Kroah-Hartman

misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minors

2025-02-17T08:40:38Z

commit 6d04d2b554b14ae6c428a9c60b6c85f1e5c89f68 upstream. misc_minor_alloc was allocating id using ida for minor only in case of MISC_DYNAMIC_MINOR but misc_minor_free was always freeing ids using ida_free causing a mismatch and following warn: > > WARNING: CPU: 0 PID: 159 at lib/idr.c:525 ida_free+0x3e0/0x41f > > ida_free called for id=127 which is not allocated. > > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ... > > [<60941eb4>] ida_free+0x3e0/0x41f > > [<605ac993>] misc_minor_free+0x3e/0xbc > > [<605acb82>] misc_deregister+0x171/0x1b3 misc_minor_alloc is changed to allocate id from ida for all minors falling in the range of dynamic/ misc dynamic minors Fixes: ab760791c0cf ("char: misc: Increase the maximum number of dynamic misc devices to 1048448") Signed-off-by: Vimal Agrawal Reviewed-by: Dirk VanDerMerwe Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20241021133812.23703-1-vimal.agrawal@sophos.com Signed-off-by: Greg Kroah-Hartman

tpm: Change to kvalloc() in eventlog/acpi.c

2025-02-17T08:40:32Z

commit a3a860bc0fd6c07332e4911cf9a238d20de90173 upstream. The following failure was reported on HPE ProLiant D320: [ 10.693310][ T1] tpm_tis STM0925:00: 2.0 TPM (device-id 0x3, rev-id 0) [ 10.848132][ T1] ------------[ cut here ]------------ [ 10.853559][ T1] WARNING: CPU: 59 PID: 1 at mm/page_alloc.c:4727 __alloc_pages_noprof+0x2ca/0x330 [ 10.862827][ T1] Modules linked in: [ 10.866671][ T1] CPU: 59 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-lp155.2.g52785e2-default #1 openSUSE Tumbleweed (unreleased) 588cd98293a7c9eba9013378d807364c088c9375 [ 10.882741][ T1] Hardware name: HPE ProLiant DL320 Gen12/ProLiant DL320 Gen12, BIOS 1.20 10/28/2024 [ 10.892170][ T1] RIP: 0010:__alloc_pages_noprof+0x2ca/0x330 [ 10.898103][ T1] Code: 24 08 e9 4a fe ff ff e8 34 36 fa ff e9 88 fe ff ff 83 fe 0a 0f 86 b3 fd ff ff 80 3d 01 e7 ce 01 00 75 09 c6 05 f8 e6 ce 01 01 <0f> 0b 45 31 ff e9 e5 fe ff ff f7 c2 00 00 08 00 75 42 89 d9 80 e1 [ 10.917750][ T1] RSP: 0000:ffffb7cf40077980 EFLAGS: 00010246 [ 10.923777][ T1] RAX: 0000000000000000 RBX: 0000000000040cc0 RCX: 0000000000000000 [ 10.931727][ T1] RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000040cc0 The above transcript shows that ACPI pointed a 16 MiB buffer for the log events because RSI maps to the 'order' parameter of __alloc_pages_noprof(). Address the bug by moving from devm_kmalloc() to devm_add_action() and kvmalloc() and devm_add_action(). Suggested-by: Ard Biesheuvel Cc: stable@vger.kernel.org # v2.6.16+ Fixes: 55a82ab3181b ("[PATCH] tpm: add bios measurement log") Reported-by: Andy Liang Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219495 Reviewed-by: Ard Biesheuvel Reviewed-by: Stefan Berger Reviewed-by: Takashi Iwai Tested-by: Andy Liang Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

ipmi: ssif_bmc: Fix new request loss when bmc ready for a response

2025-02-08T08:51:55Z

[ Upstream commit 83d8c79aa958e37724ed9c14dc7d0f66a48ad864 ] Cosmo found that when there is a new request comes in while BMC is ready for a response, the complete_response(), which is called to complete the pending response, would accidentally clear out that new request and force ssif_bmc to move back to abort state again. This commit is to address that issue. Fixes: dd2bc5cc9e25 ("ipmi: ssif_bmc: Add SSIF BMC driver") Reported-by: Cosmo Chou Closes: https://lore.kernel.org/lkml/20250101165431.2113407-1-chou.cosmo@gmail.com/ Signed-off-by: Quan Nguyen Message-ID: <20250107034734.1842247-1-quan@os.amperecomputing.com> Signed-off-by: Corey Minyard Signed-off-by: Sasha Levin