user/sven/linux.git/drivers/clocksource/Makefile, branch v3.7.4

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2012-10-02T01:24:44Z

Pull ARM soc-specific updates from Olof Johansson: "Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well." Fix up trivial conflicts with the clk infrastructure changes. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits) ARM: shmobile: add new __iomem annotation for new code ARM: LPC32xx: Support GPI 28 ARM: LPC32xx: Platform update for devicetree completion of spi-pl022 ARM: LPC32xx: Board cleanup irqchip: fill in empty Kconfig ARM: SAMSUNG: Add check for NULL in clock interface ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state ARM: EXYNOS: Add bus clock for FIMD ARM: SAMSUNG: Fix HDMI related warnings ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock ARM: EXYNOS: Fix incorrect help text ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ...

ARM: bcm2835: add system timer

2012-09-20T01:08:46Z

The System Timer peripheral provides four 32-bit timer channels and a single 64-bit free running counter. Each channel has an output compare register, which is compared against the 32 least significant bits of the free running counter values, and generates an interrupt. Timer 3 is used as the Linux timer. The BCM2835 also contains an SP804-based timer module. However, it apparently has significant differences from the standard SP804 IP block, and Broadcom's documentation recommends using the system timer instead. This patch was extracted from git://github.com/lp0/linux.git branch rpi-split as of 2012/09/08, and modified as follows: * s/bcm2708/bcm2835/. * Modified device tree vendor prefix. * Moved to drivers/clocksource/. This looks like the desired location for such code now. * Added DT binding docs. * Moved struct sys_timer bcm2835_timer into time.c to encapsulate it more. * Simplified bcm2835_time_init() to find one matching node and operate on it, rather than looping over all matching nodes. This seems more consistent with other clocksource code. * Simplified bcm2835_time_init() using of_iomap(). * Renamed struct bcm2835_timer.index to match_mask to better represent its purpose. * s/printk(PR_INFO/pr_info(/ Signed-off-by: Chris Boot Signed-off-by: Simon Arlott Signed-off-by: Dom Cobley Signed-off-by: Dom Cobley Signed-off-by: Stephen Warren Acked-by: Arnd Bergmann

arm64: Generic timers support

2012-09-17T12:42:20Z

This patch adds support for the ARM generic timers with A64 instructions for accessing the timer registers. It uses the physical counter as the clock source and the virtual counter as sched_clock. The timer frequency can be specified via DT or read from the CNTFRQ_EL0 register. The physical counter is also accessible from user space allowing fast gettimeofday() implementation. Signed-off-by: Marc Zyngier Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas Acked-by: Tony Lindgren Acked-by: Nicolas Pitre Acked-by: Olof Johansson Acked-by: Santosh Shilimkar Acked-by: Arnd Bergmann

Merge tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2012-07-23T23:31:31Z

Pull support for three new arm SoC types from Arnd Bergmann: - The mvebu platform includes Marvell's Armada XP and Armada 370 chips, made by the mvebu business unit inside of Marvell. Since the same group also made the older but similar platforms we call "orion5x", "kirkwood", "mv78xx0" and "dove", we plan to move all of them into the mach-mvebu directory in the future. - socfpga is Altera's platform based on Cortex-A9 cores and a lot of FPGA space. This is similar to the Xilinx zynq platform we already support. The code is particularly clean, which is helped by the fact that the hardware doesn't do much besides the parts that are expected to get added in the FPGA. - The OMAP subarchitecture gains support for the latest generation, the OMAP5 based on the new Cortex-A15 core. Support is rather rudimentary for now, but will be extended in the future. * tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits) ARM: socfpga: initial support for Altera's SOCFPGA platform arm: mvebu: generate DTBs for supported SoCs ARM: mvebu: MPIC: read number of interrupts from control register arm: mach-mvebu: add entry to MAINTAINERS arm: mach-mvebu: add compilation/configuration change arm: mach-mvebu: add defconfig arm: mach-mvebu: add documentation for new device tree bindings arm: mach-mvebu: add support for Armada 370 and Armada XP with DT arm: mach-mvebu: add source files arm: mach-mvebu: add header clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver ARM: Kconfig update to support additional GPIOs in OMAP5 ARM: OMAP5: Add the build support arm/dts: OMAP5: Add omap5 dts files ARM: OMAP5: board-generic: Add device tree support ARM: omap2+: board-generic: clean up the irq data from board file ARM: OMAP5: Add SMP support ARM: OMAP5: Add the WakeupGen IP updates ARM: OMAP5: l3: Add l3 error handler support for omap5 ARM: OMAP5: gpmc: Update gpmc_init() ... Conflicts: Documentation/devicetree/bindings/arm/omap/omap.txt arch/arm/mach-omap2/Makefile drivers/clocksource/Kconfig drivers/clocksource/Makefile

clocksource: dw_apb_timer: Add common DTS glue for dw_apb_timer

2012-07-12T15:26:09Z

Make a common device tree glue for clocksource/dw_apb_timer. Move mach-picoxcell/time.c to be a generic device tree application of the dw_apb_timer. Configure mach-picoxcell to use the dw_apb_timer_of device tree implementation in drivers/clocksource. Signed-off-by: Pavel Machek Signed-off-by: Dinh Nguyen Acked-by: Jamie Iles Acked-by: Thomas Gleixner Signed-off-by: Arnd Bergmann

clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver

2012-07-10T13:47:46Z

Timer 0 is used as free-running clocksource, while timer 1 is used as clock_event_device. Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni Signed-off-by: Lior Amsalem Reviewed-by: Thomas Gleixner Tested-by: Yehuda Yitschak Tested-by: Lior Amsalem Acked-by: Andrew Lunn CC: Thomas Gleixner CC: John Stultz

clocksource: em_sti: Emma Mobile STI driver

2012-05-25T09:32:06Z

The STI hardware is based on a single 48-bit 32kHz counter that together with two individual compare registers can generate interrupts. There are no timer operating modes selectable which means that the timer can not clear on match. This driver is providing clocksource support for the 48-bit counter. Clockevents are also supported using the same timer in oneshot mode. Signed-off-by: Magnus Damm Cc: horms@verge.net.au Cc: arnd@arndb.de Cc: johnstul@us.ibm.com Cc: rjw@sisk.pl Cc: lethal@linux-sh.org Cc: gregkh@linuxfoundation.org Cc: olof@lixom.net Link: http://lkml.kernel.org/r/20120525070344.23443.69756.sendpatchset@w520 Signed-off-by: Thomas Gleixner

clocksource: add DBX500 PRCMU Timer support

2011-09-22T13:42:57Z

This patch adds the DBX500 PRCMU Timer driver as a clocksource and as sched_clock. Cc: Thomas Gleixner Signed-off-by: Mattias Wallin Signed-off-by: Jonas Aaberg Signed-off-by: Linus Walleij

Merge branch 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

2011-07-23T17:34:47Z

* 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource: apb: Share APB timer code with other platforms

clocksource: apb: Share APB timer code with other platforms

2011-06-27T22:16:21Z

The APB timers are an IP block from Synopsys (DesignWare APB timers) and are also found in other systems including ARM SoC's. This patch adds functions for creating clock_event_devices and clocksources from APB timers but does not do the resource allocation. This is handled in a higher layer to allow the timers to be created from multiple methods such as platform_devices. Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Jacob Pan Signed-off-by: Jamie Iles Signed-off-by: John Stultz