user/sven/linux.git/drivers/clocksource/sun4i_timer.c, branch v4.15.11

clocksource/drivers/sun4i: Switch to the timer-of common init

2017-06-26T16:32:04Z

Previously a framework to factor out the drivers init function has been merged. Use this common framework in this driver, we get: Before: text data bss dec hex filename 1787 384 12 2183 887 drivers/clocksource/sun4i_timer.o After: text data bss dec hex filename 1407 512 0 1919 77f drivers/clocksource/sun4i_timer.o Signed-off-by: Daniel Lezcano Tested-by: Chen-Yu Tsai

clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE

2017-06-14T09:58:45Z

The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the clocksource at early stage. However, this macro is also used to initialize the clockevent if any, or the clockevent only. It was originally suggested to declare another macro to initialize a clockevent, so in order to separate the two entities even they belong to the same IP. This was not accepted because of the impact on the DT where splitting a clocksource/clockevent definition does not make sense as it is a Linux concept not a hardware description. On the other side, the clocksource has not interrupt declared while the clockevent has, so it is easy from the driver to know if the description is for a clockevent or a clocksource, IOW it could be implemented at the driver level. So instead of dealing with a named clocksource macro, let's use a more generic one: TIMER_OF_DECLARE. The patch has not functional changes. Signed-off-by: Daniel Lezcano Acked-by: Heiko Stuebner Acked-by: Neil Armstrong Acked-by: Arnd Bergmann Acked-by: Matthias Brugger Reviewed-by: Linus Walleij

clocksource: Add missing line break to error messages

2017-04-07T14:23:04Z

Printing with pr_* functions requires adding line break manually. Signed-off-by: Rafał Miłecki Acked-by: Thierry Reding Signed-off-by: Daniel Lezcano

clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe function

2016-08-26T13:56:01Z

The bootloader (U-boot) sometimes uses this timer for various delays. It uses it as a ongoing counter, and does comparisons on the current counter value. The timer counter is never stopped. In some cases when the user interacts with the bootloader, or lets it idle for some time before loading Linux, the timer may expire, and an interrupt will be pending. This results in an unexpected interrupt when the timer interrupt is enabled by the kernel, at which point the event_handler isn't set yet. This results in a NULL pointer dereference exception, panic, and no way to reboot. Clear any pending interrupts after we stop the timer in the probe function to avoid this. Cc: stable@vger.kernel.org Signed-off-by: Chen-Yu Tsai Signed-off-by: Daniel Lezcano Acked-by: Maxime Ripard

clocksources: Switch back to the clksrc table

2016-06-28T08:19:35Z

All the clocksource drivers's init function are now converted to return an error code. CLOCKSOURCE_OF_DECLARE is no longer used as well as the clksrc-of table. Let's convert back the names: - CLOCKSOURCE_OF_DECLARE_RET => CLOCKSOURCE_OF_DECLARE - clksrc-of-ret => clksrc-of Signed-off-by: Daniel Lezcano For exynos_mct and samsung_pwm_timer: Acked-by: Krzysztof Kozlowski For arch/arc: Acked-by: Vineet Gupta For mediatek driver: Acked-by: Matthias Brugger For the Rockchip-part Acked-by: Heiko Stuebner For STi : Acked-by: Patrice Chotard For the mps2-timer.c and versatile.c changes: Acked-by: Liviu Dudau For the OXNAS part : Acked-by: Neil Armstrong For LPC32xx driver: Acked-by: Sylvain Lemieux For Broadcom Kona timer change: Acked-by: Ray Jui For Sun4i and Sun5i: Acked-by: Chen-Yu Tsai For Meson6: Acked-by: Carlo Caione For Keystone: Acked-by: Santosh Shilimkar For NPS: Acked-by: Noam Camus For bcm2835: Acked-by: Eric Anholt

clocksource/drivers/sun4i: Convert init function to return error

2016-06-28T08:19:26Z

The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano

clockevents/drivers/sun4i: Migrate to new 'set-state' interface

2015-08-10T09:40:40Z

Migrate sun4i driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Maxime Ripard Signed-off-by: Viresh Kumar Signed-off-by: Daniel Lezcano Acked-by: Maxime Ripard

clocksource/drivers/sun4i-timer: Only register a sched_clock on sun4i and sun5i

2015-03-31T07:15:58Z

sun6i and newer have an arm arch timer which is a better sched_clock source then the sun4i-timer, and sched_clock does not have priorities, so do not register the sun4i-timer sched_clock at all on sun6i and newer. Signed-off-by: Hans de Goede Signed-off-by: Daniel Lezcano Acked-by: Maxime Ripard Cc: ben.dooks@codethink.co.uk Cc: digetx@gmail.com Cc: laurent.pinchart+renesas@ideasonboard.com Cc: linux-arm-kernel@lists.infradead.org Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1427746633-9137-8-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar

clockevent: sun4i: Fix race condition in the probe code

2014-11-19T09:43:51Z

The interrupts were activated and the handler registered before the clockevent was registered in the probe function. The interrupt handler, however, was making the assumption that the clockevent device was registered. That could cause a null pointer dereference if the timer interrupt was firing during this narrow window. Fix that by moving the clockevent registration before the interrupt is enabled. Reported-by: Roman Byshko Signed-off-by: Maxime Ripard Cc: stable@vger.kernel.org Signed-off-by: Daniel Lezcano

clocksource: sunxi: Add new compatibles

2014-03-11T22:04:46Z

The Allwinner A10 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Add compatibles matching the other pattern to the timer driver for consistency, and keep the older one for backward compatibility. Signed-off-by: Maxime Ripard Signed-off-by: Daniel Lezcano