user/sven/linux.git/drivers/clocksource, branch v4.10.3

clocksource/exynos_mct: Clear interrupt when cpu is shut down

2017-01-17T09:08:38Z

When a CPU goes offline a potentially pending timer interrupt is not cleared. When the CPU comes online again then the pending interrupt is delivered before the per cpu clockevent device is initialized. As a consequence the tick interrupt handler dereferences a NULL pointer. [ 51.251378] Unable to handle kernel NULL pointer dereference at virtual address 00000040 [ 51.289348] task: ee942d00 task.stack: ee960000 [ 51.293861] PC is at tick_periodic+0x38/0xb0 [ 51.298102] LR is at tick_handle_periodic+0x1c/0x90 Clear the pending interrupt in the cpu dying path. Fixes: 56a94f13919c ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier") Reported-by: Seung-Woo Kim Signed-off-by: Joonyoung Shim Cc: linux-samsung-soc@vger.kernel.org Cc: cw00.choi@samsung.com Cc: daniel.lezcano@linaro.org Cc: stable@vger.kernel.org Cc: javier@osg.samsung.com Cc: kgene@kernel.org Cc: krzk@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1484628876-22065-1-git-send-email-jy0922.shim@samsung.com Signed-off-by: Thomas Gleixner

Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2016-12-25T22:30:04Z

Pull timer type cleanups from Thomas Gleixner: "This series does a tree wide cleanup of types related to timers/timekeeping. - Get rid of cycles_t and use a plain u64. The type is not really helpful and caused more confusion than clarity - Get rid of the ktime union. The union has become useless as we use the scalar nanoseconds storage unconditionally now. The 32bit timespec alike storage got removed due to the Y2038 limitations some time ago. That leaves the odd union access around for no reason. Clean it up. Both changes have been done with coccinelle and a small amount of manual mopping up" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ktime: Get rid of ktime_equal() ktime: Cleanup ktime_set() usage ktime: Get rid of the union clocksource: Use a plain u64 instead of cycle_t

clocksource: Use a plain u64 instead of cycle_t

2016-12-25T10:04:12Z

There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: John Stultz

cpu/hotplug: Cleanup state names

2016-12-25T09:47:44Z

When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Sebastian Siewior Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de Signed-off-by: Thomas Gleixner

clocksource/drivers/moxart: Plug memory and mapping leaks

2016-12-19T10:19:57Z

If of_iomap() or any other subsequent function fails moxart_timer_init() exits without freeing memory and unmapping the timer base. Add proper cleanup points. Signed-off-by: Sudip Mukherjee Cc: Daniel Lezcano Cc: Sudip Mukherjee Link: http://lkml.kernel.org/r/1482099996-1524-1-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Thomas Gleixner

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-12-15T23:39:02Z

Pull ARM SoC platform updates from Arnd Bergmann: "These are updates for platform specific code on 32-bit ARM machines, essentially anything that can not (yet) be expressed using DT files. Noteworthy changes include: - Added support for the TI DRA71x family of SoCs in mach-omap2, this is an new variant of the the DRA72x/DRA74x automotive infotainment chips we already supported for a while. - Added support for the ST STM32F746 SoC, the first Cortex-M7 based microcontroller we support, related to the smaller STM32F4 family. - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see http://elinux.org/RZ-G - SMP is now supported on the OX820 platform - A lot of code in mach-omap2 gets removed as a follow-up to removing support for board files in the previous release - Davinci has some new work to improve USB support - For i.MX, the performance monitor now supports profiling the memory controller using 'perf'" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits) ARM: davinci: da830-evm: use gpio descriptor for mmc pins ARM: davinci: da850-evm: use gpio descriptor for mmc pins ARM: davinci: hawk: use gpio descriptor for mmc pins ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6 ARM: davinci: da8xx: Fix ohci device name ARM: oxnas: Add OX820 config and makefile entry ARM: oxnas: Add OX820 SMP support ARM: davinci: PM: fix build when da850 not compiled in ARM: orion5x: remove legacy support of ls-chl ARM: integrator: drop EBI access use syscon ARM: BCM5301X: Add back handler ignoring external imprecise aborts ARM: davinci: PM: support da8xx DT platforms ARM: davinci: PM: cleanup: remove references to pdata ARM: davinci: PM: rework init, remove platform device ARM: Kconfig: Introduce MACH_STM32F746 flag ARM: mach-stm32: Add a new SOC - STM32F746 ARM: shmobile: document SK-RZG1E board ARM: shmobile: r8a7745: basic SoC support ARM: imx: mach-imx6ul: add imx6ull support ARM: zynq: Reserve correct amount of non-DMA RAM ...

Merge tag 'arc-4.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

2016-12-15T22:15:17Z

Pull ARC updates from Vineet Gupta: "These are mostly timer/clocksource driver updates which were Reviewed/Acked by Daniel but had to be merged via ARC tree due to dependencies. I will follow up with another pull request with actual ARC changes early next week ! Summary: - Moving ARC timer driver into drivers/clocksource - EZChip timer driver updates [Noam] - ARC AXS103 and HAPS platform updates [Alexey]" * tag 'arc-4.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: axs10x: really enable ARC PGU ARC: rename Zebu platform support to HAPS clocksource: nps: avoid maybe-uninitialized warning clocksource: Add clockevent support to NPS400 driver clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer soc: Support for NPS HW scheduling clocksource: import ARC timer driver ARC: breakout timer include code into separate header ... ARC: move mcip.h into include/soc and adjust the includes ARC: breakout aux handling into a separate header ARC: time: move time_init() out of the driver ARC: timer: gfrc, rtc: build under same option (64-bit timers) ARC: timer: gfrc, rtc: Read BCR to detect whether hardware exists ... ARC: timer: gfrc, rtc: deuglify big endian code

clocksource: nps: avoid maybe-uninitialized warning

2016-11-30T19:54:25Z

We get a harmless false-positive warning with the newly added nps clocksource driver: drivers/clocksource/timer-nps.c: In function 'nps_setup_clocksource': drivers/clocksource/timer-nps.c:102:6: error: 'nps_timer1_freq' may be used uninitialized in this function [-Werror=maybe-uninitialized] Gcc here fails to identify that IS_ERR() is only true if PTR_ERR() has a nonzero value. Using PTR_ERR_OR_ZERO() to convert the result first makes this obvious and shuts up the warning. Fixes: 0ee4d9922df5 ("clocksource: Add clockevent support to NPS400 driver") Signed-off-by: Arnd Bergmann Signed-off-by: Vineet Gupta

clocksource: Add clockevent support to NPS400 driver

2016-11-30T19:54:25Z

Till now we used clockevent from generic ARC driver. This was enough as long as we worked with simple multicore SoC. When we are working with multithread SoC each HW thread can be scheduled to receive timer interrupt using timer mask register. This patch will provide a way to control clock events per HW thread. The design idea is that for each core there is dedicated register (TSI) serving all 16 HW threads. The register is a bitmask with one bit for each HW thread. When HW thread wants that next expiration of timer interrupt will hit it then the proper bit should be set in this dedicated register. When timer expires all HW threads within this core which their bit is set at the TSI register will be interrupted. Driver can be used from device tree by: compatible = "ezchip,nps400-timer0" <-- for clocksource compatible = "ezchip,nps400-timer1" <-- for clockevent Note that name convention for timer0/timer1 was taken from legacy ARC design. This design is our base before adding HW threads. For backward compatibility we keep "ezchip,nps400-timer" for clocksource Signed-off-by: Noam Camus Acked-by: Daniel Lezcano Acked-by: Rob Herring

clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer

2016-11-30T19:54:25Z

nps_setup_clocksource() should take node as only argument as defined by typedef int (*of_init_fn_1_ret)(struct device_node *) Therefore need to replace: int __init nps_setup_clocksource(struct device_node *node, struct clk *clk) with int __init nps_setup_clocksource(struct device_node *node) This patch also serve as preparation for next patch which add support for clockevents to nps400. Specifically we add new function nps_get_timer_clk() to serve clocksource and later clockevent registration. Signed-off-by: Noam Camus Acked-by: Daniel Lezcano