user/sven/linux.git/drivers/clocksource, branch v4.19.265

clocksource/drivers/sp804: Avoid error on multiple instances

2022-06-14T14:59:37Z

[ Upstream commit a98399cbc1e05f7b977419f03905501d566cf54e ] When a machine sports more than one SP804 timer instance, we only bring up the first one, since multiple timers of the same kind are not useful to Linux. As this is intentional behaviour, we should not return an error message, as we do today: =============== [ 0.000800] Failed to initialize '/bus@8000000/motherboard-bus@8000000/iofpga-bus@300000000/timer@120000': -22 =============== Replace the -EINVAL return with a debug message and return 0 instead. Also we do not reach the init function anymore if the DT node is disabled (as this is now handled by OF_DECLARE), so remove the explicit check for that case. This fixes a long standing bogus error when booting ARM's fastmodels. Signed-off-by: Andre Przywara Reviewed-by: Robin Murphy Link: https://lore.kernel.org/r/20220506162522.3675399-1-andre.przywara@arm.com Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin

clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value

2022-06-14T14:59:33Z

[ Upstream commit 9c04a8ff03def4df3f81219ffbe1ec9b44ff5348 ] The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO. Fixes: 89355274e1f7 ("clocksource/drivers/oxnas-rps: Add Oxford Semiconductor RPS Dual Timer") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20220422104101.55754-1-krzysztof.kozlowski@linaro.org Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin

clocksource/drivers/riscv: Events are stopped during CPU suspend

2022-06-14T14:59:32Z

[ Upstream commit 232ccac1bd9b5bfe73895f527c08623e7fa0752d ] Some implementations of the SBI time extension depend on hart-local state (for example, CSRs) that are lost or hardware that is powered down when a CPU is suspended. To be safe, the clockevents driver cannot assume that timer IRQs will be received during CPU suspend. Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver") Signed-off-by: Samuel Holland Reviewed-by: Anup Patel Link: https://lore.kernel.org/r/20220509012121.40031-1-samuel@sholland.org Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin

clocksource: acpi_pm: fix return value of __setup handler

2022-04-15T12:14:44Z

[ Upstream commit 6a861abceecb68497dd82a324fee45a5332dcece ] __setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) environment strings. The __setup() handler interface isn't meant to handle negative return values -- they are non-zero, so they mean "handled" (like a return value of 1 does), but that's just a quirk. So return 1 from parse_pmtmr(). Also print a warning message if kstrtouint() returns an error. Fixes: 6b148507d3d0 ("pmtmr: allow command line override of ioport") Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

clocksource/drivers/timer-of: Check return value of of_iomap in timer_of_base_init()

2022-04-15T12:14:43Z

[ Upstream commit 4467b8bad2401794fb89a0268c8c8257180bf60f ] of_base->base can either be iomapped using of_io_request_and_map() or of_iomap() depending whether or not an of_base->name has been set. Thus check of_base->base against NULL as of_iomap() does not return a PTR_ERR() in case of error. Fixes: 9aea417afa6b ("clocksource/drivers/timer-of: Don't request the resource by name") Signed-off-by: Guillaume Ranquet Link: https://lore.kernel.org/r/20220307172656.4836-1-granquet@baylibre.com Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin

clocksource/drivers/timer-ti-dm: Select TIMER_OF

2021-11-26T10:36:10Z

[ Upstream commit eda9a4f7af6ee47e9e131f20e4f8a41a97379293 ] When building OMAP_DM_TIMER without TIMER_OF, there are orphan sections due to the use of TIMER_OF_DELCARE() without CONFIG_TIMER_OF. Select CONFIG_TIMER_OF when enaling OMAP_DM_TIMER: arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ti-dm-systimer.o' being placed in section `__timer_of_table' Reported-by: kernel test robot Link: https://lore.kernel.org/lkml/202108282255.tkdt4ani-lkp@intel.com/ Cc: Tony Lindgren Cc: Daniel Lezcano Cc: Keerthy Cc: Sebastian Reichel Cc: Ladislav Michl Cc: Grygorii Strashko Cc: linux-omap@vger.kernel.org Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support") Signed-off-by: Kees Cook Acked-by: Tony Lindgren Link: https://lore.kernel.org/r/20210828175747.3777891-1-keescook@chromium.org Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin

clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock source channel

2021-09-22T09:47:51Z

[ Upstream commit be83c3b6e7b8ff22f72827a613bf6f3aa5afadbb ] If CMT instance has at least two channels, one channel will be used as a clock source and another one used as a clock event device. In that case, IRQ is not requested for clock source channel so sh_cmt_clock_event_program_verify() might work incorrectly. Besides, when a channel is only used for clock source, don't need to re-set the next match_value since it should be maximum timeout as it still is. On the other hand, due to no IRQ, total_cycles is not counted up when reaches compare match time (timer counter resets to zero), so sh_cmt_clocksource_read() returns unexpected value. Therefore, use 64-bit clocksoure's mask for 32-bit or 16-bit variants will also lead to wrong delta calculation. Hence, this mask should correspond to timer counter width, and above function just returns the raw value of timer counter register. Fixes: bfa76bb12f23 ("clocksource: sh_cmt: Request IRQ for clock event device only") Fixes: 37e7742c55ba ("clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines") Signed-off-by: Phong Hoang Signed-off-by: Niklas Söderlund Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210422123443.73334-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Sasha Levin

clocksource/arm_arch_timer: Improve Allwinner A64 timer workaround

2021-07-20T14:16:04Z

commit 8b33dfe0ba1c84c1aab2456590b38195837f1e6e upstream. Bad counter reads are experienced sometimes when bit 10 or greater rolls over. Originally, testing showed that at least 10 lower bits would be set to the same value during these bad reads. However, some users still reported time skips. Wider testing revealed that on some chips, occasionally only the lowest 9 bits would read as the anomalous value. During these reads (which still happen only when bit 10), bit 9 would read as the correct value. Reduce the mask by one bit to cover these cases as well. Cc: stable@vger.kernel.org Fixes: c950ca8c35ee ("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability") Reported-by: Roman Stratiienko Signed-off-by: Samuel Holland Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210515021439.55316-1-samuel@sholland.org Signed-off-by: Greg Kroah-Hartman

clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is defined

2021-03-04T08:39:44Z

[ Upstream commit 7da390694afbaed8e0f05717a541dfaf1077ba51 ] When DEBUG is defined this error occurs drivers/clocksource/mxs_timer.c:138:1: error: expected ‘;’ before ‘}’ token The preceding statement needs a semicolon. Replace pr_info() with pr_debug() and remove the unneeded ifdef. Fixes: eb8703e2ef7c ("clockevents/drivers/mxs: Migrate to new 'set-state' interface") Signed-off-by: Tom Rix Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210118211955.763609-1-trix@redhat.com Signed-off-by: Sasha Levin

clocksource/drivers/arm_arch_timer: Correct fault programming of CNTKCTL_EL1.EVNTI

2020-12-30T10:26:00Z

[ Upstream commit 8b7770b877d187bfdae1eaf587bd2b792479a31c ] ARM virtual counter supports event stream, it can only trigger an event when the trigger bit (the value of CNTKCTL_EL1.EVNTI) of CNTVCT_EL0 changes, so the actual period of event stream is 2^(cntkctl_evnti + 1). For example, when the trigger bit is 0, then virtual counter trigger an event for every two cycles. While we're at it, rework the way we compute the trigger bit position by making it more obvious that when bits [n:n-1] are both set (with n being the most significant bit), we pick bit (n + 1). Fixes: 037f637767a8 ("drivers: clocksource: add support for ARM architected timer event stream") Suggested-by: Marc Zyngier Signed-off-by: Keqian Zhu Acked-by: Marc Zyngier Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20201204073126.6920-3-zhukeqian1@huawei.com Signed-off-by: Sasha Levin