Linux Kernel https://git.stealer.net/cgit.cgi/user/sven/linux.git/atom?h=v5.5.8 2020-02-24T07:38:26Z 2020-02-24T07:38:26Z Bartosz Golaszewski bgolaszewski@baylibre.com 2020-01-10T17:16:41Z urn:sha1:6adf50d0371ac22ecc424ee879fa3aed3b3de32e [ Upstream commit cea931c25104e6bddc42eb067f58193f355dbdd7 ] The DM365 platform has a strange quirk (only present when using ancient u-boot - mainline u-boot v2013.01 and later works fine) where if we enable the second half of the timer in periodic mode before we do its initialization - the time won't start flowing and we can't boot. When using more recent u-boot, we can enable the timer, then reinitialize it and all works fine. To work around this issue only enable clockevents once tim34 is initialized i.e. move clockevents_config_and_register() below tim34 initialization. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 2020-02-24T07:38:05Z Colin Ian King colin.king@canonical.com 2019-12-19T21:32:46Z urn:sha1:3019eab8600908cbed7c4bdf4a08fc6a8c20402f [ Upstream commit 2052d032c06761330bca4944bb7858b00960e868 ] Currently when setup_irq fails the error exit path will leak the recently allocated timer structure. Originally the code would throw a panic but a later commit changed the behaviour to return via the err_iounmap path and hence we now have a memory leak. Fix this by adding a err_timer_free error path that kfree's timer. Addresses-Coverity: ("Resource Leak") Fixes: 524a7f08983d ("clocksource/drivers/bcm2835_timer: Convert init function to return error") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191219213246.34437-1-colin.king@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org> 2020-01-05T05:48:48Z Zong Li zong.li@sifive.com 2019-12-23T08:46:14Z urn:sha1:9d05c18e8d7de566ff68f221fcae65e78708dd1d When enabling ftrace graph tracer, it gets the tracing clock in ftrace_push_return_trace(). Eventually, it invokes riscv_sched_clock() to get the clock value. If riscv_sched_clock() isn't marked with 'notrace', it will call ftrace_push_return_trace() and cause infinite loop. The result of failure as follow: command: echo function_graph >current_tracer [ 46.176787] Unable to handle kernel paging request at virtual address ffffffe04fb38c48 [ 46.177309] Oops [#1] [ 46.177478] Modules linked in: [ 46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47 [ 46.177981] epc: ffffffe00035e59a ra : ffffffe00035e57e sp : ffffffe03a7569b0 [ 46.178216] gp : ffffffe000d29b90 tp : ffffffe03a756180 t0 : ffffffe03a756968 [ 46.178430] t1 : ffffffe00087f408 t2 : ffffffe03a7569a0 s0 : ffffffe03a7569f0 [ 46.178643] s1 : ffffffe00087f408 a0 : 0000000ac054cda4 a1 : 000000000087f411 [ 46.178856] a2 : 0000000ac054cda4 a3 : 0000000000373ca0 a4 : ffffffe04fb38c48 [ 46.179099] a5 : 00000000153e22a8 a6 : 00000000005522ff a7 : 0000000000000005 [ 46.179338] s2 : ffffffe03a756a90 s3 : ffffffe00032811c s4 : ffffffe03a756a58 [ 46.179570] s5 : ffffffe000d29fe0 s6 : 0000000000000001 s7 : 0000000000000003 [ 46.179809] s8 : 0000000000000003 s9 : 0000000000000002 s10: 0000000000000004 [ 46.180053] s11: 0000000000000000 t3 : 0000003fc815749c t4 : 00000000000efc90 [ 46.180293] t5 : ffffffe000d29658 t6 : 0000000000040000 [ 46.180482] status: 0000000000000100 badaddr: ffffffe04fb38c48 cause: 000000000000000f Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> [paul.walmsley@sifive.com: cleaned up patch description] Fixes: 92e0d143fdef ("clocksource/drivers/riscv_timer: Provide the sched_clock") Cc: stable@vger.kernel.org Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> 2019-12-03T20:20:25Z Linus Torvalds torvalds@linux-foundation.org 2019-12-03T20:20:25Z urn:sha1:043cf46825c102683b1027762c09c7e2b749e5a3 Pull timer updates from Ingo Molnar: "The main changes in the timer code in this cycle were: - Clockevent updates: - timer-of framework cleanups. (Geert Uytterhoeven) - Use timer-of for the renesas-ostm and the device name to prevent name collision in case of multiple timers. (Geert Uytterhoeven) - Check if there is an error after calling of_clk_get in asm9260 (Chuhong Yuan) - ABI fix: Zero out high order bits of nanoseconds on compat syscalls. This got broken a year ago, with apparently no side effects so far. Since the kernel would use random data otherwise I don't think we'd have other options but to fix the bug, even if there was a side effect to applications (Dmitry Safonov) - Optimize ns_to_timespec64() on 32-bit systems: move away from div_s64_rem() which can be slow, to div_u64_rem() which is faster (Arnd Bergmann) - Annotate KCSAN-reported false positive data races in hrtimer_is_queued() users by moving timer->state handling over to the READ_ONCE()/WRITE_ONCE() APIs. This documents these accesses (Eric Dumazet) - Misc cleanups and small fixes" [ I undid the "ABI fix" and updated the comments instead. The reason there were apparently no side effects is that the fix was a no-op. The updated comment is to say _why_ it was a no-op. - Linus ] * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Zero the upper 32-bits in __kernel_timespec on 32-bit time: Rename tsk->real_start_time to ->start_boottime hrtimer: Remove the comment about not used HRTIMER_SOFTIRQ time: Fix spelling mistake in comment time: Optimize ns_to_timespec64() hrtimer: Annotate lockless access to timer->state clocksource/drivers/asm9260: Add a check for of_clk_get clocksource/drivers/renesas-ostm: Use unique device name instead of ostm clocksource/drivers/renesas-ostm: Convert to timer_of clocksource/drivers/timer-of: Use unique device name instead of timer clocksource/drivers/timer-of: Convert last full_name to %pOF 2019-11-27T19:27:59Z Linus Torvalds torvalds@linux-foundation.org 2019-11-27T19:27:59Z urn:sha1:6a0e20cd8cddd70ae5c1211ebe102d738ff2069b Pull RISC-V updates from Paul Walmsley: "New features: - SECCOMP support - nommu support - SBI-less system support - M-Mode support - TLB flush optimizations Other improvements: - Pass the complete RISC-V ISA string supported by the CPU cores to userspace, rather than redacting parts of it in the kernel - Add platform DMA IP block data to the HiFive Unleashed board DT file - Add Makefile support for BZ2, LZ4, LZMA, LZO kernel image compression formats, in line with other architectures Cleanups: - Remove unnecessary PTE_PARENT_SIZE macro - Standardize include guard naming across arch/riscv" * tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits) riscv: provide a flat image loader riscv: add nommu support riscv: clear the instruction cache and all registers when booting riscv: read the hart ID from mhartid on boot riscv: provide native clint access for M-mode riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00 riscv: add support for MMIO access to the timer registers riscv: implement remote sfence.i using IPIs riscv: cleanup the default power off implementation riscv: poison SBI calls for M-mode riscv: don't allow selecting SBI based drivers for M-mode RISC-V: Add multiple compression image format. riscv: clean up the macro format in each header file riscv: Use PMD_SIZE to replace PTE_PARENT_SIZE riscv: abstract out CSR names for supervisor vs machine mode riscv: separate MMIO functions into their own header file riscv: enter WFI in default_power_off() if SBI does not shutdown RISC-V: Issue a tlb page flush if possible RISC-V: Issue a local tlbflush if possible. RISC-V: Do not invoke SBI call if cpumask is empty ... 2019-11-27T19:06:20Z Linus Torvalds torvalds@linux-foundation.org 2019-11-27T19:06:20Z urn:sha1:9a3d7fd275be4559277667228902824165153c80 Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 5.5-rc1 There's a few minor cleanups and fixes in here, but the majority of the patches in here fall into two buckets: - debugfs api cleanups and fixes - driver core device link support for boot dependancy issues The debugfs api cleanups are working to slowly refactor the debugfs apis so that it is even harder to use incorrectly. That work has been happening for the past few kernel releases and will continue over time, it's a long-term project/goal The driver core device link support missed 5.4 by just a bit, so it's been sitting and baking for many months now. It's from Saravana Kannan to help resolve the problems that DT-based systems have at boot time with dependancy graphs and kernel modules. Turns out that no one has actually tried to build a generic arm64 kernel with loads of modules and have it "just work" for a variety of platforms (like a distro kernel). The big problem turned out to be a lack of dependency information between different areas of DT entries, and the work here resolves that problem and now allows devices to boot properly, and quicker than a monolith kernel. All of these patches have been in linux-next for a long time with no reported issues" * tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits) tracing: Remove unnecessary DEBUG_FS dependency of: property: Add device link support for interrupt-parent, dmas and -gpio(s) debugfs: Fix !DEBUG_FS debugfs_create_automount of: property: Add device link support for "iommu-map" of: property: Fix the semantics of of_is_ancestor_of() i2c: of: Populate fwnode in of_i2c_get_board_info() drivers: base: Fix Kconfig indentation firmware_loader: Fix labels with comma for builtin firmware driver core: Allow device link operations inside sync_state() driver core: platform: Declare ret variable only once cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h> crypto: hisilicon: no need to check return value of debugfs_create functions driver core: platform: use the correct callback type for bus_find_device firmware_class: make firmware caching configurable driver core: Clarify documentation for fwnode_operations.add_links() mailbox: tegra: Fix superfluous IRQ error message net: caif: Fix debugfs on 64-bit platforms mac80211: Use debugfs_create_xul() helper media: c8sectpfe: no need to check return value of debugfs_create functions of: property: Add device link support for iommus, mboxes and io-channels ... 2019-11-26T17:43:34Z Linus Torvalds torvalds@linux-foundation.org 2019-11-26T17:43:34Z urn:sha1:64d6a12094f35d644540c15440874723b1887f9d Pull x86 hyperv updates from Ingo Molnar: "Misc updates to the hyperv guest code: - Rework clockevents initialization to better support hibernation - Allow guests to enable InvariantTSC - Micro-optimize send_ipi_one" * 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyperv: Initialize clockevents earlier in CPU onlining x86/hyperv: Allow guests to enable InvariantTSC x86/hyperv: Micro-optimize send_ipi_one() 2019-11-26T03:40:40Z Linus Torvalds torvalds@linux-foundation.org 2019-11-26T03:40:40Z urn:sha1:436b2a8039ac00f8dc6ae8f3bd2be83748f72312 Pull printk updates from Petr Mladek: - Allow to print symbolic error names via new %pe modifier. - Use pr_warn() instead of the remaining pr_warning() calls. Fix formatting of the related lines. - Add VSPRINTF entry to MAINTAINERS. * tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits) checkpatch: don't warn about new vsprintf pointer extension '%pe' MAINTAINERS: Add VSPRINTF tools lib api: Renaming pr_warning to pr_warn ASoC: samsung: Use pr_warn instead of pr_warning lib: cpu_rmap: Use pr_warn instead of pr_warning trace: Use pr_warn instead of pr_warning dma-debug: Use pr_warn instead of pr_warning vgacon: Use pr_warn instead of pr_warning fs: afs: Use pr_warn instead of pr_warning sh/intc: Use pr_warn instead of pr_warning scsi: Use pr_warn instead of pr_warning platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning platform/x86: asus-laptop: Use pr_warn instead of pr_warning platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning oprofile: Use pr_warn instead of pr_warning of: Use pr_warn instead of pr_warning macintosh: Use pr_warn instead of pr_warning idsn: Use pr_warn instead of pr_warning ide: Use pr_warn instead of pr_warning crypto: n2: Use pr_warn instead of pr_warning ... 2019-11-25T14:43:15Z Ingo Molnar mingo@kernel.org 2019-11-25T14:43:15Z urn:sha1:83bae01182ea755280adc1c3a24032d63a614ede Signed-off-by: Ingo Molnar <mingo@kernel.org> 2019-11-15T09:33:49Z Michael Kelley mikelley@microsoft.com 2019-11-13T01:11:49Z urn:sha1:4df4cb9e99f83b70d54bc0e25081ac23cceafcbc Hyper-V has historically initialized stimer-based clockevents late in the process of onlining a CPU because clockevents depend on stimer interrupts. In the original Hyper-V design, stimer interrupts generate a VMbus message, so the VMbus machinery must be running first, and VMbus can't be initialized until relatively late. On x86/64, LAPIC timer based clockevents are used during early initialization before VMbus and stimer-based clockevents are ready, and again during CPU offlining after the stimer clockevents have been shut down. Unfortunately, this design creates problems when offlining CPUs for hibernation or other purposes. stimer-based clockevents are shut down relatively early in the offlining process, so clockevents_unbind_device() must be used to fallback to the LAPIC-based clockevents for the remainder of the offlining process. Furthermore, the late initialization and early shutdown of stimer-based clockevents doesn't work well on ARM64 since there is no other timer like the LAPIC to fallback to. So CPU onlining and offlining doesn't work properly. Fix this by recognizing that stimer Direct Mode is the normal path for newer versions of Hyper-V on x86/64, and the only path on other architectures. With stimer Direct Mode, stimer interrupts don't require any VMbus machinery. stimer clockevents can be initialized and shut down consistent with how it is done for other clockevent devices. While the old VMbus-based stimer interrupts must still be supported for backward compatibility on x86, that mode of operation can be treated as legacy. So add a new Hyper-V stimer entry in the CPU hotplug state list, and use that new state when in Direct Mode. Update the Hyper-V clocksource driver to allocate and initialize stimer clockevents earlier during boot. Update Hyper-V initialization and the VMbus driver to use this new design. As a result, the LAPIC timer is no longer used during boot or CPU onlining/offlining and clockevents_unbind_device() is not called. But retain the old design as a legacy implementation for older versions of Hyper-V that don't support Direct Mode. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lkml.kernel.org/r/1573607467-9456-1-git-send-email-mikelley@microsoft.com