user/sven/linux.git/drivers/crypto/vmx, branch v4.14.136

crypto: vmx - ghash: do nosimd fallback manually

2019-06-09T07:18:12Z

commit 357d065a44cdd77ed5ff35155a989f2a763e96ef upstream. VMX ghash was using a fallback that did not support interleaving simd and nosimd operations, leading to failures in the extended test suite. If I understood correctly, Eric's suggestion was to use the same data format that the generic code uses, allowing us to call into it with the same contexts. I wasn't able to get that to work - I think there's a very different key structure and data layout being used. So instead steal the arm64 approach and perform the fallback operations directly if required. Fixes: cc333cd68dfa ("crypto: vmx - Adding GHASH routines for VMX module") Cc: stable@vger.kernel.org # v4.1+ Reported-by: Eric Biggers Signed-off-by: Daniel Axtens Acked-by: Ard Biesheuvel Tested-by: Michael Ellerman Signed-off-by: Herbert Xu Signed-off-by: Daniel Axtens Signed-off-by: Greg Kroah-Hartman

crypto: vmx - CTR: always increment IV as quadword

2019-05-31T13:47:11Z

commit 009b30ac7444c17fae34c4f435ebce8e8e2b3250 upstream. The kernel self-tests picked up an issue with CTR mode: alg: skcipher: p8_aes_ctr encryption test failed (wrong result) on test vector 3, cfg="uneven misaligned splits, may sleep" Test vector 3 has an IV of FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD, so after 3 increments it should wrap around to 0. In the aesp8-ppc code from OpenSSL, there are two paths that increment IVs: the bulk (8 at a time) path, and the individual path which is used when there are fewer than 8 AES blocks to process. In the bulk path, the IV is incremented with vadduqm: "Vector Add Unsigned Quadword Modulo", which does 128-bit addition. In the individual path, however, the IV is incremented with vadduwm: "Vector Add Unsigned Word Modulo", which instead does 4 32-bit additions. Thus the IV would instead become FFFFFFFFFFFFFFFFFFFFFFFF00000000, throwing off the result. Use vadduqm. This was probably a typo originally, what with q and w being adjacent. It is a pretty narrow edge case: I am really impressed by the quality of the kernel self-tests! Fixes: 5c380d623ed3 ("crypto: vmx - Add support for VMS instructions by ASM") Cc: stable@vger.kernel.org Signed-off-by: Daniel Axtens Acked-by: Nayna Jain Tested-by: Nayna Jain Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: vmx - fix copy-paste error in CTR mode

2019-05-21T16:50:14Z

commit dcf7b48212c0fab7df69e84fab22d6cb7c8c0fb9 upstream. The original assembly imported from OpenSSL has two copy-paste errors in handling CTR mode. When dealing with a 2 or 3 block tail, the code branches to the CBC decryption exit path, rather than to the CTR exit path. This leads to corruption of the IV, which leads to subsequent blocks being corrupted. This can be detected with libkcapi test suite, which is available at https://github.com/smuellerDD/libkcapi Reported-by: Ondrej Mosnáček Fixes: 5c380d623ed3 ("crypto: vmx - Add support for VMS instructions by ASM") Cc: stable@vger.kernel.org Signed-off-by: Daniel Axtens Tested-by: Michael Ellerman Tested-by: Ondrej Mosnacek Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: vmx - Fix sleep-in-atomic bugs

2018-09-09T17:56:01Z

commit 0522236d4f9c5ab2e79889cb020d1acbe5da416e upstream. This patch fixes sleep-in-atomic bugs in AES-CBC and AES-XTS VMX implementations. The problem is that the blkcipher_* functions should not be called in atomic context. The bugs can be reproduced via the AF_ALG interface by trying to encrypt/decrypt sufficiently large buffers (at least 64 KiB) using the VMX implementations of 'cbc(aes)' or 'xts(aes)'. Such operations then trigger BUG in crypto_yield(): [ 891.863680] BUG: sleeping function called from invalid context at include/crypto/algapi.h:424 [ 891.864622] in_atomic(): 1, irqs_disabled(): 0, pid: 12347, name: kcapi-enc [ 891.864739] 1 lock held by kcapi-enc/12347: [ 891.864811] #0: 00000000f5d42c46 (sk_lock-AF_ALG){+.+.}, at: skcipher_recvmsg+0x50/0x530 [ 891.865076] CPU: 5 PID: 12347 Comm: kcapi-enc Not tainted 4.19.0-0.rc0.git3.1.fc30.ppc64le #1 [ 891.865251] Call Trace: [ 891.865340] [c0000003387578c0] [c000000000d67ea4] dump_stack+0xe8/0x164 (unreliable) [ 891.865511] [c000000338757910] [c000000000172a58] ___might_sleep+0x2f8/0x310 [ 891.865679] [c000000338757990] [c0000000006bff74] blkcipher_walk_done+0x374/0x4a0 [ 891.865825] [c0000003387579e0] [d000000007e73e70] p8_aes_cbc_encrypt+0x1c8/0x260 [vmx_crypto] [ 891.865993] [c000000338757ad0] [c0000000006c0ee0] skcipher_encrypt_blkcipher+0x60/0x80 [ 891.866128] [c000000338757b10] [c0000000006ec504] skcipher_recvmsg+0x424/0x530 [ 891.866283] [c000000338757bd0] [c000000000b00654] sock_recvmsg+0x74/0xa0 [ 891.866403] [c000000338757c10] [c000000000b00f64] ___sys_recvmsg+0xf4/0x2f0 [ 891.866515] [c000000338757d90] [c000000000b02bb8] __sys_recvmsg+0x68/0xe0 [ 891.866631] [c000000338757e30] [c00000000000bbe4] system_call+0x5c/0x70 Fixes: 8c755ace357c ("crypto: vmx - Adding CBC routines for VMX module") Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS") Cc: stable@vger.kernel.org Signed-off-by: Ondrej Mosnacek Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: vmx - Use skcipher for ctr fallback

2018-09-05T07:26:23Z

commit e666d4e9ceec94c0a88c94b7db31d56474da43b3 upstream. Signed-off-by: Paulo Flabiano Smorigo Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: vmx - Remove overly verbose printk from AES XTS init

2018-06-16T07:45:18Z

commit 730f23b66095a700e2f0786abda6bca011b31558 upstream. In p8_aes_xts_init() we do a printk(KERN_INFO ...) to report the fallback implementation we're using. However with a slow console this can significantly affect the speed of crypto operations. So remove it. Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Michael Ellerman Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: vmx - Remove overly verbose printk from AES init routines

2018-06-16T07:45:18Z

commit 1411b5218adbcf1d45ddb260db5553c52e8d917c upstream. In the vmx AES init routines we do a printk(KERN_INFO ...) to report the fallback implementation we're using. However with a slow console this can significantly affect the speed of crypto operations. Using 'cryptsetup benchmark' the removal of the printk() leads to a ~5x speedup for aes-cbc decryption. So remove them. Fixes: 8676590a1593 ("crypto: vmx - Adding AES routines for VMX module") Fixes: 8c755ace357c ("crypto: vmx - Adding CBC routines for VMX module") Fixes: 4f7f60d312b3 ("crypto: vmx - Adding CTR routines for VMX module") Fixes: cc333cd68dfa ("crypto: vmx - Adding GHASH routines for VMX module") Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Michael Ellerman Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

crypto: algapi - make crypto_xor() take separate dst and src arguments

2017-08-04T01:27:15Z

There are quite a number of occurrences in the kernel of the pattern if (dst != src) memcpy(dst, src, walk.total % AES_BLOCK_SIZE); crypto_xor(dst, final, walk.total % AES_BLOCK_SIZE); or crypto_xor(keystream, src, nbytes); memcpy(dst, keystream, nbytes); where crypto_xor() is preceded or followed by a memcpy() invocation that is only there because crypto_xor() uses its output parameter as one of the inputs. To avoid having to add new instances of this pattern in the arm64 code, which will be refactored to implement non-SIMD fallbacks, add an alternative implementation called crypto_xor_cpy(), taking separate input and output arguments. This removes the need for the separate memcpy(). Signed-off-by: Ard Biesheuvel Signed-off-by: Herbert Xu

crypto: vmx - remove unnecessary check

2017-06-20T03:21:49Z

You can't reach init() if parent alg_name is invalid. Moreover, cypto_alloc_base() will return ENOENT if alg_name is NULL. Found while grasping the fallback mechanism. Signed-off-by: Tudor Ambarus Signed-off-by: Herbert Xu