user/sven/linux.git/drivers/dax, branch v4.14.18

dev/dax: fix uninitialized variable build warning

2017-12-20T09:10:34Z

[ Upstream commit 0a3ff78699d1817e711441715d22665475466036 ] Fix this build warning: warning: 'phys' may be used uninitialized in this function [-Wuninitialized] As reported here: https://lkml.org/lkml/2017/10/16/152 http://kisskb.ellerman.id.au/kisskb/buildresult/13181373/log/ Signed-off-by: Ross Zwisler Signed-off-by: Dan Williams Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

device-dax: implement ->split() to catch invalid munmap attempts

2017-12-05T10:26:28Z

commit 9702cffdbf2129516db679e4467db81e1cd287da upstream. Similar to how device-dax enforces that the 'address', 'offset', and 'len' parameters to mmap() be aligned to the device's fundamental alignment, the same constraints apply to munmap(). Implement ->split() to fail munmap calls that violate the alignment constraint. Otherwise, we later fail VM_BUG_ON checks in the unmap_page_range() path with crash signatures of the form: vma ffff8800b60c8a88 start 00007f88c0000000 end 00007f88c0e00000 next (null) prev (null) mm ffff8800b61150c0 prot 8000000000000027 anon_vma (null) vm_ops ffffffffa0091240 pgoff 0 file ffff8800b638ef80 private_data (null) flags: 0x380000fb(read|write|shared|mayread|maywrite|mayexec|mayshare|softdirty|mixedmap|hugepage) ------------[ cut here ]------------ kernel BUG at mm/huge_memory.c:2014! [..] RIP: 0010:__split_huge_pud+0x12a/0x180 [..] Call Trace: unmap_page_range+0x245/0xa40 ? __vma_adjust+0x301/0x990 unmap_vmas+0x4c/0xa0 unmap_region+0xae/0x120 ? __vma_rb_erase+0x11a/0x230 do_munmap+0x276/0x410 vm_munmap+0x6a/0xa0 SyS_munmap+0x1d/0x30 Link: http://lkml.kernel.org/r/151130418681.4029.7118245855057952010.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: dee410792419 ("/dev/dax, core: file operations and dax-mmap") Signed-off-by: Dan Williams Reported-by: Jeff Moyer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

dax: fix general protection fault in dax_alloc_inode

2017-11-30T08:40:53Z

commit 9f586fff6574f6ecbf323f92d44ffaf0d96225fe upstream. Don't crash in case of allocation failure in dax_alloc_inode. syzkaller hit the following crash on e4880bc5dfb1 kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access [..] RIP: 0010:dax_alloc_inode+0x3b/0x70 drivers/dax/super.c:348 Call Trace: alloc_inode+0x65/0x180 fs/inode.c:208 new_inode_pseudo+0x69/0x190 fs/inode.c:890 new_inode+0x1c/0x40 fs/inode.c:919 mount_pseudo_xattr+0x288/0x560 fs/libfs.c:261 mount_pseudo include/linux/fs.h:2137 [inline] dax_mount+0x2e/0x40 drivers/dax/super.c:388 mount_fs+0x66/0x2d0 fs/super.c:1223 Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider...") Reported-by: syzbot Signed-off-by: Mikulas Patocka Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

2017-09-14T20:43:16Z

Pull device mapper updates from Mike Snitzer: - Some request-based DM core and DM multipath fixes and cleanups - Constify a few variables in DM core and DM integrity - Add bufio optimization and checksum failure accounting to DM integrity - Fix DM integrity to avoid checking integrity of failed reads - Fix DM integrity to use init_completion - A couple DM log-writes target fixes - Simplify DAX flushing by eliminating the unnecessary flush abstraction that was stood up for DM's use. * tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dax: remove the pmem_dax_ops->flush abstraction dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK dm integrity: make blk_integrity_profile structure const dm integrity: do not check integrity for failed read operations dm log writes: fix >512b sectorsize support dm log writes: don't use all the cpu while waiting to log blocks dm ioctl: constify ioctl lookup table dm: constify argument arrays dm integrity: count and display checksum failures dm integrity: optimize writing dm-bufio buffers that are partially changed dm rq: do not update rq partially in each ending bio dm rq: make dm-sq requeuing behavior consistent with dm-mq behavior dm mpath: complain about unsupported __multipath_map_bio() return values dm mpath: avoid that building with W=1 causes gcc 7 to complain about fall-through

dax: remove the pmem_dax_ops->flush abstraction

2017-09-11T15:00:55Z

Commit abebfbe2f731 ("dm: add ->flush() dax operation support") is buggy. A DM device may be composed of multiple underlying devices and all of them need to be flushed. That commit just routes the flush request to the first device and ignores the other devices. It could be fixed by adding more complex logic to the device mapper. But there is only one implementation of the method pmem_dax_ops->flush - that is pmem_dax_flush() - and it calls arch_wb_cache_pmem(). Consequently, we don't need the pmem_dax_ops->flush abstraction at all, we can call arch_wb_cache_pmem() directly from dax_flush() because dax_dev->ops->flush can't ever reach anything different from arch_wb_cache_pmem(). It should be also pointed out that for some uses of persistent memory it is needed to flush only a very small amount of data (such as 1 cacheline), and it would be overkill if we go through that device mapper machinery for a single flushed cache line. Fix this by removing the pmem_dax_ops->flush abstraction and call arch_wb_cache_pmem() directly from dax_flush(). Also, remove the device mapper code that forwards the flushes. Fixes: abebfbe2f731 ("dm: add ->flush() dax operation support") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka Reviewed-by: Dan Williams Signed-off-by: Mike Snitzer

dax: fix FS_DAX=n BLOCK=y compilation

2017-09-03T17:17:53Z

The 0day kbuild robot reports: >> drivers//dax/super.c:64:20: error: redefinition of 'fs_dax_get_by_bdev' struct dax_device *fs_dax_get_by_bdev(struct block_device *bdev) ^~~~~~~~~~~~~~~~~~ In file included from drivers//dax/super.c:22:0: include/linux/dax.h:76:34: note: previous definition of 'fs_dax_get_by_bdev' was here static inline struct dax_device *fs_dax_get_by_bdev(struct block_device *bdev) ^~~~~~~~~~~~~~~~~~ Protect the definition of fs_dax_get_by_bdev() in drivers/dax/super.c with an ifdef. Fixes: 78f354735081 ("dax: introduce a fs_dax_get_by_bdev() helper") Cc: Christoph Hellwig Cc: Darrick J. Wong Reviewed-by: Jan Kara Reported-by: kbuild test robot Signed-off-by: Dan Williams

dax: introduce a fs_dax_get_by_bdev() helper

2017-08-30T16:16:38Z

Add a helper that can replace the following common pattern: if (blk_queue_dax(bdev->bd_queue)) fs_dax_get_by_host(bdev->bd_disk->disk_name); This will be used to move dax_device lookup from iomap-operation time to fs-mount time. Reviewed-by: Jan Kara Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Dan Williams

Merge tag 'for-4.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

2017-07-28T19:17:17Z

Pull device mapper fixes from Mike Snitzer: - a few DM integrity fixes that improve performance. One that address inefficiencies in the on-disk journal device layout. Another that makes use of the block layer's on-stack plugging when writing the journal. - a dm-bufio fix for the blk_status_t conversion that went in during the merge window. - a few DM raid fixes that address correctness when suspending the device and a validation fix for validation that occurs during device activation. - a couple DM zoned target fixes. Important one being the fix to not use GFP_KERNEL in the IO path due to concerns about deadlock in low-memory conditions (e.g. swap over a DM zoned device, etc). - a DM DAX device fix to make sure dm_dax_flush() is called if the underlying DAX device is operating as a write cache. * tag 'for-4.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm, dax: Make sure dm_dax_flush() is called if device supports it dm verity fec: fix GFP flags used with mempool_alloc() dm zoned: use GFP_NOIO in I/O path dm zoned: remove test for impossible REQ_OP_FLUSH conditions dm raid: bump target version dm raid: avoid mddev->suspended access dm raid: fix activation check in validate_raid_redundancy() dm raid: remove WARN_ON() in raid10_md_layout_to_format() dm bufio: fix error code in dm_bufio_write_dirty_buffers() dm integrity: test for corrupted disk format during table load dm integrity: WARN_ON if variables representing journal usage get out of sync dm integrity: use plugging when writing the journal dm integrity: fix inefficient allocation of journal space

dm, dax: Make sure dm_dax_flush() is called if device supports it

2017-07-26T19:55:44Z

Currently dm_dax_flush() is not being called, even if underlying dax device supports write cache, because DAXDEV_WRITE_CACHE is not being propagated up to the DM dax device. If the underlying dax device supports write cache, set DAXDEV_WRITE_CACHE on the DM dax device. This will cause dm_dax_flush() to be called. Fixes: abebfbe2f7 ("dm: add ->flush() dax operation support") Signed-off-by: Vivek Goyal Acked-by: Dan Williams Signed-off-by: Mike Snitzer