user/sven/linux.git/drivers/devfreq/devfreq.c, branch v5.8

PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex

2020-05-28T09:02:40Z

Instead of warning when mutex_is_locked(), just use the lockdep framework. The code is smaller and checks could be disabled for production environments (it is useful only during development). Put asserts at beginning of function, even before validating arguments. The behavior of update_devfreq() is now changed because lockdep assert will only print a warning, not return with EINVAL. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi

PM / devfreq: Replace strncpy with strscpy

2020-05-28T09:02:39Z

GCC produces this warning when kernel compiled using `make W=1`: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation] 772 | strncpy(devfreq->governor_name, governor_name, DEVFREQ_NAME_LEN); The strncpy doesn't take care of NULL-termination of the destination buffer, while the strscpy does. Signed-off-by: Dmitry Osipenko Signed-off-by: Chanwoo Choi

PM / devfreq: Fix handling dev_pm_qos_remove_request result

2020-03-24T23:35:03Z

The dev_pm_qos_remove_request function can return 1 if "aggregated constraint value has changed" so only negative values should be reported as errors. Fixes: 27dbc542f651 ("PM / devfreq: Use PM QoS for sysfs min/max_freq") Reported-by: Dan Carpenter Signed-off-by: Leonard Crestez Signed-off-by: Chanwoo Choi

PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name

2020-03-24T23:35:03Z

DEVFREQ_GOV_INTERVAL event indicates that update the interval for polling mode of devfreq device. But, this event name doesn't specify exactly what to do. Change DEVFREQ_GOV_INTERVAL event name to DEVFREQ_GOV_UPDATE_INTERVAL which specifies what to do by event name. And modify the function name to DEVFREQ_GOV_UPDATE_INTERVAL with 'devfreq_' prefix + verb + object as following: - devfreq_interval_update -> devfreq_updatee_interval Reviewed-by: Lukasz Luba Signed-off-by: Chanwoo Choi

Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"

2020-02-24T02:14:29Z

This reverts commit 4585fbcb5331fc910b7e553ad3efd0dd7b320d14. The name changing as devfreq(X) breaks some user space applications, such as Android HAL from Unisoc and Hikey [1]. The device name will be changed unexpectly after every boot depending on module init sequence. It will make trouble to setup some system configuration like selinux for Android. So we'd like to revert it back to old naming rule before any better way being found. [1] https://lkml.org/lkml/2018/5/8/1042 Cc: John Stultz Cc: Greg Kroah-Hartman Cc: stable@vger.kernel.org Signed-off-by: Orson Zhai Acked-by: Greg Kroah-Hartman Signed-off-by: Chanwoo Choi

PM / devfreq: Add debugfs support with devfreq_summary file

2020-01-16T10:14:49Z

Add debugfs interface to provide debugging information of devfreq device. It contains 'devfreq_summary' entry to show the summary of registered devfreq devices as following and the additional debugfs file will be added. - /sys/kernel/debug/devfreq/devfreq_summary [Detailed description of each field of 'devfreq_summary' debugfs file] - dev_name : Device name of h/w - dev : Device name made by devfreq core - parent_dev : If devfreq device uses the passive governor, show parent devfreq device name. Otherwise, show 'null'. - governor : Devfreq governor name - polling_ms : If devfreq device uses the simple_ondemand governor, polling_ms is necessary for the period. (unit: millisecond) - cur_freq_Hz : Current frequency (unit: Hz) - min_freq_Hz : Minimum frequency (unit: Hz) - max_freq_Hz : Maximum frequency (unit: Hz) [For example on Exynos5422-based Odroid-XU3 board] $ cat /sys/kernel/debug/devfreq/devfreq_summary dev_name dev parent_dev governor polling_ms cur_freq_Hz min_freq_Hz max_freq_Hz ------------------------------ ---------- ---------- --------------- ---------- ------------ ------------ ------------ 10c20000.memory-controller devfreq0 null simple_ondemand 0 165000000 165000000 825000000 soc:bus_wcore devfreq1 null simple_ondemand 50 532000000 88700000 532000000 soc:bus_noc devfreq2 devfreq1 passive 0 111000000 66600000 111000000 soc:bus_fsys_apb devfreq3 devfreq1 passive 0 222000000 111000000 222000000 soc:bus_fsys devfreq4 devfreq1 passive 0 200000000 75000000 200000000 soc:bus_fsys2 devfreq5 devfreq1 passive 0 200000000 75000000 200000000 soc:bus_mfc devfreq6 devfreq1 passive 0 333000000 83250000 333000000 soc:bus_gen devfreq7 devfreq1 passive 0 266000000 88700000 266000000 soc:bus_peri devfreq8 devfreq1 passive 0 66600000 66600000 66600000 soc:bus_g2d devfreq9 devfreq1 passive 0 333000000 83250000 333000000 soc:bus_g2d_acp devfreq10 devfreq1 passive 0 266000000 66500000 266000000 soc:bus_jpeg devfreq11 devfreq1 passive 0 300000000 75000000 300000000 soc:bus_jpeg_apb devfreq12 devfreq1 passive 0 166500000 83250000 166500000 soc:bus_disp1_fimd devfreq13 devfreq1 passive 0 200000000 120000000 200000000 soc:bus_disp1 devfreq14 devfreq1 passive 0 300000000 120000000 300000000 soc:bus_gscl_scaler devfreq15 devfreq1 passive 0 300000000 150000000 300000000 soc:bus_mscl devfreq16 devfreq1 passive 0 666000000 84000000 666000000 [lkp: Reported the build error] Reported-by: kbuild test robot Signed-off-by: Chanwoo Choi

PM / devfreq: Fix multiple kernel-doc warnings

2019-12-30T00:59:06Z

Fix kernel-doc warnings in devfreq files. Also fix a typo. Signed-off-by: Randy Dunlap Signed-off-by: Chanwoo Choi

PM / devfreq: Move declaration of DEVICE_ATTR_RW(min_freq)

2019-12-30T00:59:05Z

Declaration of DEVICE_ATTR_RW(min_freq) is placed after function max_freq_store. Move it to the correct place after min_freq_show. Signed-off-by: Kamil Konieczny Signed-off-by: Chanwoo Choi

PM / devfreq: Move statistics to separate struct devfreq_stats

2019-12-30T00:59:05Z

Count time and transitions between devfreq frequencies in separate struct devfreq_stats for improved code readability and maintenance. Signed-off-by: Kamil Konieczny Reviewed-by: Matthias Kaehlcke [cw00.choi: Fix the merge conflict in trasn_stat_store and use 'devfreq->stats.*' style for consistent coding style and restore the clean-up code of 'devfreq->profile->*'] Signed-off-by: Chanwoo Choi

PM / devfreq: Add clearing transitions stats

2019-12-30T00:59:05Z

Add clearing transition table and time in states devfreq statistics by writing 0 (zero) to trans_stat file in devfreq sysfs. An example use is like following: echo 0 > /sys/class/devfreq/devfreqX/trans_stat Signed-off-by: Kamil Konieczny [cw00.choi: Edit return value if entering the wrong value for reset and use arrary3_size() to get the size of 3-dimensional array] Signed-off-by: Chanwoo Choi