user/sven/linux.git/drivers/devfreq, branch v4.14.4

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

PM / devfreq: Fix memory leak when fail to register device

2017-08-28T01:31:08Z

When the devfreq_add_device fails to register deivce, the memory leak of devfreq instance happen. So, this patch fix the memory leak issue. Before freeing the devfreq instance checks whether devfreq instance is NULL or not because the device_unregister() frees the devfreq instance when jumping to the 'err_init'. It is to prevent the duplicate the kfee(devfreq). Cc: stable@vger.kernel.org Fixes: ac4b281176a5 ("PM / devfreq: fix duplicated kfree on devfreq pointer") Signed-off-by: Chanwoo Choi Signed-off-by: MyungJoo Ham

PM / devfreq: Add dependency on PM_OPP

2017-08-28T01:23:57Z

The devfreq ues the OPP library to handle the voltage and frequency for the device basically. This patch adds the dependency on CONFIG_PM_OPP in order to prevent either the build break or the unknow behavior. Signed-off-by: Chanwoo Choi Signed-off-by: MyungJoo Ham

PM / devfreq: Move private devfreq_update_stats() into devfreq

2017-08-28T01:22:27Z

THe devfreq_update_stats() updates the 'struct devfreq_dev_status' in order to get current status of devfreq device. It is only used for the governors. This patch moves the devfreq_update_stats() into devfreq directory. Signed-off-by: Chanwoo Choi Signed-off-by: MyungJoo Ham

PM / devfreq: Convert to using %pOF instead of full_name

2017-08-28T00:15:33Z

Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring Reviewed-by: Chanwoo Choi Signed-off-by: MyungJoo Ham Cc: Kyungmin Park Cc: linux-pm@vger.kernel.org

PM / devfreq: constify attribute_group structures.

2017-07-06T01:17:24Z

attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 621 176 0 797 31d drivers/devfreq/governor_userspace.o File size After adding 'const': text data bss dec hex filename 670 144 0 814 32e drivers/devfreq/governor_userspace.o Signed-off-by: Arvind Yadav Reviewed-by: Chanwoo Choi Signed-off-by: MyungJoo Ham

PM / devfreq: tegra: fix error return code in tegra_devfreq_probe()

2017-07-06T01:16:17Z

platform_get_irq() returns an error code, but the tegra-devfreq driver ignores it and always returns -ENODEV. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. Reviewed-by: Chanwoo Choi Signed-off-by: Gustavo A. R. Silva Signed-off-by: MyungJoo Ham

PM / devfreq: rk3399_dmc: fix error return code in rk3399_dmcfreq_probe()

2017-07-06T01:15:22Z

platform_get_irq() returns an error code, but the rk3399_dmc driver ignores it and always returns -EINVAL. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. Reviewed-by: Chanwoo Choi Signed-off-by: Gustavo A. R. Silva Signed-off-by: MyungJoo Ham

PM / devfreq: exynos-ppmu: Staticize event list

2017-06-12T01:12:07Z

The ppmu_events array is accessed only in this compilation unit so it can be made static. Signed-off-by: Krzysztof Kozlowski Acked-by: Chanwoo Choi Signed-off-by: MyungJoo Ham

PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable

2017-06-12T01:12:07Z

clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav Signed-off-by: MyungJoo Ham