user/sven/linux.git/drivers/dma, branch v2.6.34.14

mv_xor: fix race in tasklet function

2011-04-17T20:16:14Z

commit 8333f65ef094e47020cd01452b4637e7daf5a77f upstream. use mv_xor_slot_cleanup() instead of __mv_xor_slot_cleanup() as the former function aquires the spin lock that needed to protect the drivers data. Signed-off-by: Saeed Bishara Signed-off-by: Dan Williams Signed-off-by: Paul Gortmaker

ioat2: catch and recover from broken vtd configurations v6

2011-04-17T20:15:34Z

commit 556ab45f9a775bfa4762bacc0a4afb5b44b067bc upstream. On some platforms (MacPro3,1) the BIOS assigns the ioatdma device to the incorrect iommu causing faults when the driver initializes. Add a quirk to catch this misconfiguration and try falling back to untranslated operation (which works in the MacPro3,1 case). Assuming there are other platforms with misconfigured iommus teach the ioatdma driver to treat initialization failures as non-fatal (just fail the driver load and emit a warning instead of triggering a BUG_ON). This can be classified as a boot regression since 2.6.32 on affected platforms since the ioatdma module did not autoload prior to that kernel. [PG: 34 has no WARN_TAINT_ONCE, use WARN_ONCE instead] Acked-by: David Woodhouse Reported-by: Chris Li Tested-by: Chris Li Signed-off-by: Dan Williams Signed-off-by: Paul Gortmaker

dmaengine: fix interrupt clearing for mv_xor

2011-01-06T23:08:11Z

commit cc60f8878eab892c03d06b10f389232b9b66bd83 upstream. When using simultaneously the two DMA channels on a same engine, some transfers are never completed. For example, an endless lock can occur while writing heavily on a RAID5 array (with async-tx offload support enabled). Note that this issue can also be reproduced by using the DMA test client. On a same engine, the interrupt cause register is shared between two DMA channels. This patch make sure that the cause bit is only cleared for the requested channel. Signed-off-by: Simon Guinot Tested-by: Luc Saillard Acked-by: saeed bishara Signed-off-by: Dan Williams Signed-off-by: Paul Gortmaker

Merge branch 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

2010-05-06T15:37:39Z

* 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: fix a number of Oopses and leaks in SH framebuffer driver SH: fix error paths in DMA driver sh: sh7751 pci controller io port fix sh: Fix maximum number of SCIF ports in R2D defconfigs SH: fix TS field shift calculation for DMA drivers

MIPS: TXx9: Add missing MODULE_ALIAS definitions for TXx9 platform devices

2010-04-30T19:52:40Z

This enables autoloading of the TXx9 sound driver on RBTX4927. Signed-off-by: Geert Uytterhoeven To: Atsushi Nemoto Cc: Linux MIPS Mailing List Patchwork: http://patchwork.linux-mips.org/patch/1101/ Signed-off-by: Ralf Baechle

SH: fix error paths in DMA driver

2010-04-26T07:04:48Z

If channel allocation is failing, mark the channel unused and give PM a chance to power down the hardware. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2010-03-13T00:04:50Z

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX

Merge branch 'for-next' into for-linus

2010-03-08T15:55:37Z

Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c

Driver core: Constify struct sysfs_ops in struct kobj_type

2010-03-08T01:04:49Z

Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: Emese Revfy Acked-by: David Teigland Acked-by: Matt Domsch Acked-by: Maciej Sosnowski Acked-by: Hans J. Koch Acked-by: Pekka Enberg Acked-by: Jens Axboe Acked-by: Stephen Hemminger Signed-off-by: Greg Kroah-Hartman