user/sven/linux.git/drivers/dma, branch v4.4.243

dmaengine: dma-jz4780: Fix race in jz4780_dma_tx_status

2020-11-10T09:22:16Z

commit baf6fd97b16ea8f981b8a8b04039596f32fc2972 upstream. The jz4780_dma_tx_status() function would check if a channel's cookie state was set to 'completed', and if not, it would enter the critical section. However, in that time frame, the jz4780_dma_chan_irq() function was able to set the cookie to 'completed', and clear the jzchan->vchan pointer, which was deferenced in the critical section of the first function. Fix this race by checking the channel's cookie state after entering the critical function and not before. Fixes: d894fc6046fe ("dmaengine: jz4780: add driver for the Ingenic JZ4780 DMA controller") Cc: stable@vger.kernel.org # v4.0 Signed-off-by: Paul Cercueil Reported-by: Artur Rojek Tested-by: Artur Rojek Link: https://lore.kernel.org/r/20201004140307.885556-1-paul@crapouillou.net Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: tegra-apb: Prevent race conditions on channel's freeing

2020-10-01T09:11:53Z

[ Upstream commit 8e84172e372bdca20c305d92d51d33640d2da431 ] It's incorrect to check the channel's "busy" state without taking a lock. That shouldn't cause any real troubles, nevertheless it's always better not to have any race conditions in the code. Signed-off-by: Dmitry Osipenko Acked-by: Jon Hunter Link: https://lore.kernel.org/r/20200209163356.6439-5-digetx@gmail.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: pl330: Fix burst length if burst size is smaller than bus width

2020-09-12T09:45:28Z

[ Upstream commit 0661cef675d37e2c4b66a996389ebeae8568e49e ] Move the burst len fixup after setting the generic value for it. This finally enables the fixup introduced by commit 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width"), which otherwise was overwritten by the generic value. Reported-by: kernel test robot Fixes: 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width") Signed-off-by: Marek Szyprowski Link: https://lore.kernel.org/r/20200825064617.16193-1-m.szyprowski@samsung.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate()

2020-09-12T09:45:27Z

[ Upstream commit 0cef8e2c5a07d482ec907249dbd6687e8697677f ] The reurn value of of_find_device_by_node() is not checked, thus null pointer dereference will be triggered if of_find_device_by_node() failed. Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding") Signed-off-by: Yu Kuai Link: https://lore.kernel.org/r/20200817115728.1706719-2-yukuai3@huawei.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling

2020-09-12T09:45:27Z

[ Upstream commit 5b2aa9f918f6837ae943557f8cec02c34fcf80e7 ] of_dma_xlate callback can return ERR_PTR as well NULL in case of failure. If error code is returned (not NULL) then the route should be released and the router should not be registered for the channel. Fixes: 56f13c0d9524c ("dmaengine: of_dma: Support for DMA routers") Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200806104928.25975-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: fsl-edma: Fix NULL pointer exception in fsl_edma_tx_handler

2020-07-22T07:10:07Z

commit f5e5677c420346b4e9788051c2e4d750996c428c upstream. NULL pointer exception happens occasionally on serial output initiated by login timeout. This was reproduced only if kernel was built with significant debugging options and EDMA driver is used with serial console. col-vf50 login: root Password: Login timed out after 60 seconds. Unable to handle kernel NULL pointer dereference at virtual address 00000044 Internal error: Oops: 5 [#1] ARM CPU: 0 PID: 157 Comm: login Not tainted 5.7.0-next-20200610-dirty #4 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (fsl_edma_tx_handler) from [<8016eb10>] (__handle_irq_event_percpu+0x64/0x304) (__handle_irq_event_percpu) from [<8016eddc>] (handle_irq_event_percpu+0x2c/0x7c) (handle_irq_event_percpu) from [<8016ee64>] (handle_irq_event+0x38/0x5c) (handle_irq_event) from [<801729e4>] (handle_fasteoi_irq+0xa4/0x160) (handle_fasteoi_irq) from [<8016ddcc>] (generic_handle_irq+0x34/0x44) (generic_handle_irq) from [<8016e40c>] (__handle_domain_irq+0x54/0xa8) (__handle_domain_irq) from [<80508bc8>] (gic_handle_irq+0x4c/0x80) (gic_handle_irq) from [<80100af0>] (__irq_svc+0x70/0x98) Exception stack(0x8459fe80 to 0x8459fec8) fe80: 72286b00 e3359f64 00000001 0000412d a0070013 85c98840 85c98840 a0070013 fea0: 8054e0d4 00000000 00000002 00000000 00000002 8459fed0 8081fbe8 8081fbec fec0: 60070013 ffffffff (__irq_svc) from [<8081fbec>] (_raw_spin_unlock_irqrestore+0x30/0x58) (_raw_spin_unlock_irqrestore) from [<8056cb48>] (uart_flush_buffer+0x88/0xf8) (uart_flush_buffer) from [<80554e60>] (tty_ldisc_hangup+0x38/0x1ac) (tty_ldisc_hangup) from [<8054c7f4>] (__tty_hangup+0x158/0x2bc) (__tty_hangup) from [<80557b90>] (disassociate_ctty.part.1+0x30/0x23c) (disassociate_ctty.part.1) from [<8011fc18>] (do_exit+0x580/0xba0) (do_exit) from [<801214f8>] (do_group_exit+0x3c/0xb4) (do_group_exit) from [<80121580>] (__wake_up_parent+0x0/0x14) Issue looks like race condition between interrupt handler fsl_edma_tx_handler() (called as result of fsl_edma_xfer_desc()) and terminating the transfer with fsl_edma_terminate_all(). The fsl_edma_tx_handler() handles interrupt for a transfer with already freed edesc and idle==true. Fixes: d6be34fbd39b ("dma: Add Freescale eDMA engine driver support") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Robin Gong Cc: Link: https://lore.kernel.org/r/1591877861-28156-2-git-send-email-krzk@kernel.org Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: mmp_tdma: Reset channel error on release

2020-05-20T06:11:44Z

[ Upstream commit 0c89446379218698189a47871336cb30286a7197 ] When a channel configuration fails, the status of the channel is set to DEV_ERROR so that an attempt to submit it fails. However, this status sticks until the heat end of the universe, making it impossible to recover from the error. Let's reset it when the channel is released so that further use of the channel with correct configuration is not impacted. Signed-off-by: Lubomir Rintel Link: https://lore.kernel.org/r/20200419164912.670973-5-lkundrak@v3.sk Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: pch_dma.c: Avoid data race between probe and irq handler

2020-05-20T06:11:44Z

[ Upstream commit 2e45676a4d33af47259fa186ea039122ce263ba9 ] pd->dma.dev is read in irq handler pd_irq(). However, it is set to pdev->dev after request_irq(). Therefore, set pd->dma.dev to pdev->dev before request_irq() to avoid data race between pch_dma_probe() and pd_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Madhuparna Bhowmik Link: https://lore.kernel.org/r/20200416062335.29223-1-madhuparnabhowmik10@gmail.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: edma: Add probe callback to edma_tptc_driver

2020-05-10T08:26:25Z

commit 4fa2d09c1ae879c2ee2760ab419a4f97026dd97b upstream. Due to changes in device and platform code drivers w/o probe will fail to load. This means that the devices for eDMA TPTCs are goign to be without driver and omap hwmod code will turn them off after the kernel finished loading: [ 3.015900] platform 49800000.tptc: omap_device_late_idle: enabled but no driver. Idling [ 3.024671] platform 49a00000.tptc: omap_device_late_idle: enabled but no driver. Idling This will prevent eDMA to work since the TPTCs are not enabled. Signed-off-by: Peter Ujfalusi Fixes: 34635b1accb9 ("dmaengine: edma: Add dummy driver skeleton for edma3-tptc") Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: dmatest: Fix iteration non-stop logic

2020-05-05T17:13:23Z

commit b9f960201249f20deea586b4ec814669b4c6b1c0 upstream. Under some circumstances, i.e. when test is still running and about to time out and user runs, for example, grep -H . /sys/module/dmatest/parameters/* the iterations parameter is not respected and test is going on and on until user gives echo 0 > /sys/module/dmatest/parameters/run This is not what expected. The history of this bug is interesting. I though that the commit 2d88ce76eb98 ("dmatest: add a 'wait' parameter") is a culprit, but looking closer to the code I think it simple revealed the broken logic from the day one, i.e. in the commit 0a2ff57d6fba ("dmaengine: dmatest: add a maximum number of test iterations") which adds iterations parameter. So, to the point, the conditional of checking the thread to be stopped being first part of conjunction logic prevents to check iterations. Thus, we have to always check both conditions to be able to stop after given iterations. Since it wasn't visible before second commit appeared, I add a respective Fixes tag. Fixes: 2d88ce76eb98 ("dmatest: add a 'wait' parameter") Cc: Dan Williams Cc: Nicolas Ferre Signed-off-by: Andy Shevchenko Acked-by: Nicolas Ferre Link: https://lore.kernel.org/r/20200424161147.16895-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman