user/sven/linux.git/drivers/edac, branch v3.10.85

sb_edac: Fix erroneous bytes->gigabytes conversion

2015-07-04T02:48:08Z

commit 8c009100295597f23978c224aec5751a365bc965 upstream. Signed-off-by: Jim Snow Signed-off-by: Lukasz Anaczkowski Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jiri Slaby Cc: Vinson Lee Signed-off-by: Greg Kroah-Hartman

sb_edac: avoid INTERNAL ERROR message in EDAC with unspecified channel

2015-04-29T08:34:01Z

commit 351fc4a99d49fde63fe5ab7412beb35c40d27269 upstream. Intel IA32 SDM Table 15-14 defines channel 0xf as 'not specified', but EDAC doesn't know about this and returns and INTERNAL ERROR when the channel is greater than NUM_CHANNELS: kernel: [ 1538.886456] CPU 0: Machine Check Exception: 0 Bank 1: 940000000000009f kernel: [ 1538.886669] TSC 2bc68b22e7e812 ADDR 46dae7000 MISC 0 PROCESSOR 0:306e4 TIME 1390414572 SOCKET 0 APIC 0 kernel: [ 1538.971948] EDAC MC1: INTERNAL ERROR: channel value is out of range (15 >= 4) kernel: [ 1538.972203] EDAC MC1: 0 CE memory read error on unknown memory (slot:0 page:0x46dae7 offset:0x0 grain:0 syndrome:0x0 - area:DRAM err_code:0000:009f socket:1 channel_mask:1 rank:0) This commit changes sb_edac to forward a channel of -1 to EDAC if the channel is not specified. edac_mc_handle_error() sets the channel to -1 internally after the error message anyway, so this commit should have no effect other than avoiding the INTERNAL ERROR message when the channel is not specified. Signed-off-by: Seth Jennings Signed-off-by: Mauro Carvalho Chehab Cc: Vinson Lee Signed-off-by: Greg Kroah-Hartman

cpc925_edac: Report UE events properly

2014-11-14T16:48:00Z

commit fa19ac4b92bc2b5024af3e868f41f81fa738567a upstream. Fix UE event being reported as HW_EVENT_ERR_CORRECTED. Signed-off-by: Jason Baron Link: http://lkml.kernel.org/r/8beb13803500076fef827eab33d523e355d83759.1413405053.git.jbaron@akamai.com Signed-off-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman

e7xxx_edac: Report CE events properly

2014-11-14T16:47:59Z

commit 8030122a9ccf939186f8db96c318dbb99b5463f6 upstream. Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by: Jason Baron Link: http://lkml.kernel.org/r/e6dd616f2cd51583a7e77af6f639b86313c74144.1413405053.git.jbaron@akamai.com Signed-off-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman

i3200_edac: Report CE events properly

2014-11-14T16:47:59Z

commit 8a3f075d6c9b3612b4a5fb2af8db82b38b20caf0 upstream. Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by: Jason Baron Link: http://lkml.kernel.org/r/d02465b4f30314b390c12c061502eda5e9d29c52.1413405053.git.jbaron@akamai.com Signed-off-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman

i82860_edac: Report CE events properly

2014-11-14T16:47:59Z

commit ab0543de6ff0877474f57a5aafbb51a61e88676f upstream. Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by: Jason Baron Link: http://lkml.kernel.org/r/7aee8e244a32ff86b399a8f966c4aae70296aae0.1413405053.git.jbaron@akamai.com Signed-off-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman

i7300_edac: Fix device reference count

2014-03-07T05:30:13Z

commit 75135da0d68419ef8a925f4c1d5f63d8046e314d upstream. pci_get_device() decrements the reference count of "from" (last argument) so when we break off the loop successfully we have only one device reference - and we don't know which device we have. If we want a reference to each device, we must take them explicitly and let the pci_get_device() walk complete to avoid duplicate references. This is serious, as over-putting device references will cause the device to eventually disappear. Without this fix, the kernel crashes after a few insmod/rmmod cycles. Tested on an Intel S7000FC4UR system with a 7300 chipset. Signed-off-by: Jean Delvare Link: http://lkml.kernel.org/r/20140224111656.09bbb7ed@endymion.delvare Cc: Mauro Carvalho Chehab Cc: Doug Thompson Signed-off-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman

i7core_edac: Fix PCI device reference count

2014-03-07T05:30:09Z

commit c0f5eeed0f4cef4f05b74883a7160e7edde58b6a upstream. The reference count changes done by pci_get_device can be a little misleading when the usage diverges from the most common scheme. The reference count of the device passed as the last parameter is always decreased, even if the function returns no new device. So if we are going to try alternative device IDs, we must manually increment the device reference count before each retry. If we don't, we end up decreasing the reference count, and after a few modprobe/rmmod cycles the PCI devices will vanish. In other words and as Alan put it: without this fix the EDAC code corrupts the PCI device list. This fixes kernel bug #50491: https://bugzilla.kernel.org/show_bug.cgi?id=50491 Signed-off-by: Jean Delvare Link: http://lkml.kernel.org/r/20140224093927.7659dd9d@endymion.delvare Reviewed-by: Alan Cox Cc: Mauro Carvalho Chehab Cc: Doug Thompson Signed-off-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman

EDAC: Correct workqueue setup path

2014-02-22T20:41:29Z

commit cb6ef42e516cb8948f15e4b70dc03af8020050a2 upstream. We're using edac_mc_workq_setup() both on the init path, when we load an edac driver and when we change the polling period (edac_mc_reset_delay_period) through /sys/.../edac_mc_poll_msec. On that second path we don't need to init the workqueue which has been initialized already. Thanks to Tejun for workqueue insights. Signed-off-by: Borislav Petkov Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com Signed-off-by: Greg Kroah-Hartman

EDAC: Poll timeout cannot be zero, p2

2014-02-22T20:41:29Z

commit 9da21b1509d8aa7ab4846722817d16c72d656c91 upstream. Sanitize code even more to accept unsigned longs only and to not allow polling intervals below 1 second as this is unnecessary and doesn't make much sense anyway for polling errors. Signed-off-by: Borislav Petkov Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com Cc: Doug Thompson Signed-off-by: Greg Kroah-Hartman