user/sven/linux.git/drivers/edac, branch v5.4.13

EDAC/ghes: Fix grain calculation

2019-12-31T15:45:16Z

[ Upstream commit 7088e29e0423d3195e09079b4f849ec4837e5a75 ] The current code to convert a physical address mask to a grain (defined as granularity in bytes) is: e->grain = ~(mem_err->physical_addr_mask & ~PAGE_MASK); This is broken in several ways: 1) It calculates to wrong grain values. E.g., a physical address mask of ~0xfff should give a grain of 0x1000. Without considering PAGE_MASK, there is an off-by-one. Things are worse when also filtering it with ~PAGE_MASK. This will calculate to a grain with the upper bits set. In the example it even calculates to ~0. 2) The grain does not depend on and is unrelated to the kernel's page-size. The page-size only matters when unmapping memory in memory_failure(). Smaller grains are wrongly rounded up to the page-size, on architectures with a configurable page-size (e.g. arm64) this could round up to the even bigger page-size of the hypervisor. Fix this with: e->grain = ~mem_err->physical_addr_mask + 1; The grain_bits are defined as: grain = 1 << grain_bits; Change also the grain_bits calculation accordingly, it is the same formula as in edac_mc.c now and the code can be unified. The value in ->physical_addr_mask coming from firmware is assumed to be contiguous, but this is not sanity-checked. However, in case the mask is non-contiguous, a conversion to grain_bits effectively converts the grain bit mask to a power of 2 by rounding it up. Suggested-by: James Morse Signed-off-by: Robert Richter Signed-off-by: Borislav Petkov Reviewed-by: Mauro Carvalho Chehab Cc: "linux-edac@vger.kernel.org" Cc: Tony Luck Link: https://lkml.kernel.org/r/20191106093239.25517-11-rrichter@marvell.com Signed-off-by: Sasha Levin

EDAC/amd64: Set grain per DIMM

2019-12-31T15:44:20Z

[ Upstream commit 466503d6b1b33be46ab87c6090f0ade6c6011cbc ] The following commit introduced a warning on error reports without a non-zero grain value. 3724ace582d9 ("EDAC/mc: Fix grain_bits calculation") The amd64_edac_mod module does not provide a value, so the warning will be given on the first reported memory error. Set the grain per DIMM to cacheline size (64 bytes). This is the current recommendation. Fixes: 3724ace582d9 ("EDAC/mc: Fix grain_bits calculation") Signed-off-by: Yazen Ghannam Signed-off-by: Borislav Petkov Cc: "linux-edac@vger.kernel.org" Cc: James Morse Cc: Mauro Carvalho Chehab Cc: Robert Richter Cc: Tony Luck Link: https://lkml.kernel.org/r/20191022203448.13962-7-Yazen.Ghannam@amd.com Signed-off-by: Sasha Levin

EDAC/ghes: Do not warn when incrementing refcount on 0

2019-12-17T18:56:54Z

[ Upstream commit 16214bd9e43a31683a7073664b000029bba00354 ] The following warning from the refcount framework is seen during ghes initialization: EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) ------------[ cut here ]------------ refcount_t: increment on 0; use-after-free. WARNING: CPU: 36 PID: 1 at lib/refcount.c:156 refcount_inc_checked [...] Call trace: refcount_inc_checked ghes_edac_register ghes_probe ... It warns if the refcount is incremented from zero. This warning is reasonable as a kernel object is typically created with a refcount of one and freed once the refcount is zero. Afterwards the object would be "used-after-free". For GHES, the refcount is initialized with zero, and that is why this message is seen when initializing the first instance. However, whenever the refcount is zero, the device will be allocated and registered. Since the ghes_reg_mutex protects the refcount and serializes allocation and freeing of ghes devices, a use-after-free cannot happen here. Instead of using refcount_inc() for the first instance, use refcount_set(). This can be used here because the refcount is zero at this point and can not change due to its protection by the mutex. Fixes: 23f61b9fc5cc ("EDAC/ghes: Fix locking and memory barrier issues") Reported-by: John Garry Signed-off-by: Robert Richter Signed-off-by: Borislav Petkov Tested-by: John Garry Cc: Cc: James Morse Cc: Cc: linux-edac Cc: Mauro Carvalho Chehab Cc: Cc: Tony Luck Cc: Link: https://lkml.kernel.org/r/20191121213628.21244-1-rrichter@marvell.com Signed-off-by: Sasha Levin

EDAC/altera: Use fast register IO for S10 IRQs

2019-12-17T18:55:51Z

commit 56d9e7bd3fa0f105b6670021d167744bc50ae4fe upstream. When an IRQ occurs, regmap_{read,write,...}() is invoked in atomic context. Regmap must indicate register IO is fast so that a spinlock is used instead of a mutex to avoid sleeping in atomic context: lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_write a10_eccmgr_irq_unmask unmask_irq.part.0 irq_enable __irq_startup irq_startup __setup_irq request_threaded_irq devm_request_threaded_irq altr_sdram_probe Mark it so. [ bp: Massage. ] Fixes: 3dab6bd52687 ("EDAC, altera: Add support for Stratix10 SDRAM EDAC") Reported-by: Meng Li Signed-off-by: Meng Li Signed-off-by: Thor Thayer Signed-off-by: Borislav Petkov Cc: James Morse Cc: linux-edac Cc: Mauro Carvalho Chehab Cc: Robert Richter Cc: stable Cc: Tony Luck Link: https://lkml.kernel.org/r/1574361048-17572-2-git-send-email-thor.thayer@linux.intel.com Signed-off-by: Greg Kroah-Hartman

EDAC/ghes: Fix locking and memory barrier issues

2019-12-13T07:43:30Z

[ Upstream commit 23f61b9fc5cc10d87f66e50518707eec2a0fbda1 ] The ghes registration and refcount is broken in several ways: * ghes_edac_register() returns with success for a 2nd instance even if a first instance's registration is still running. This is not correct as the first instance may fail later. A subsequent registration may not finish before the first. Parallel registrations must be avoided. * The refcount was increased even if a registration failed. This leads to stale counters preventing the device from being released. * The ghes refcount may not be decremented properly on unregistration. Always decrement the refcount once ghes_edac_unregister() is called to keep the refcount sane. * The ghes_pvt pointer is handed to the irq handler before registration finished. * The mci structure could be freed while the irq handler is running. Fix this by adding a mutex to ghes_edac_register(). This mutex serializes instances to register and unregister. The refcount is only increased if the registration succeeded. This makes sure the refcount is in a consistent state after registering or unregistering a device. Note: A spinlock cannot be used here as the code section may sleep. The ghes_pvt is protected by ghes_lock now. This ensures the pointer is not updated before registration was finished or while the irq handler is running. It is unset before unregistering the device including necessary (implicit) memory barriers making the changes visible to other CPUs. Thus, the device can not be used anymore by an interrupt. Also, rename ghes_init to ghes_refcount for better readability and switch to refcount API. A refcount is needed because there can be multiple GHES structures being defined (see ACPI 6.3 specification, 18.3.2.7 Generic Hardware Error Source, "Some platforms may describe multiple Generic Hardware Error Source structures with different notification types, ..."). Another approach to use the mci's device refcount (get_device()) and have a release function does not work here. A release function will be called only for device_release() with the last put_device() call. The device must be deleted *before* that with device_del(). This is only possible by maintaining an own refcount. [ bp: touchups. ] Fixes: 0fe5f281f749 ("EDAC, ghes: Model a single, logical memory controller") Fixes: 1e72e673b9d1 ("EDAC/ghes: Fix Use after free in ghes_edac remove path") Co-developed-by: James Morse Signed-off-by: James Morse Co-developed-by: Borislav Petkov Signed-off-by: Borislav Petkov Signed-off-by: Robert Richter Signed-off-by: Borislav Petkov Cc: "linux-edac@vger.kernel.org" Cc: Mauro Carvalho Chehab Cc: Tony Luck Link: https://lkml.kernel.org/r/20191105200732.3053-1-rrichter@marvell.com Signed-off-by: Sasha Levin

EDAC/ghes: Fix Use after free in ghes_edac remove path

2019-10-17T09:27:05Z

ghes_edac models a single logical memory controller, and uses a global ghes_init variable to ensure only the first ghes_edac_register() will do anything. ghes_edac is registered the first time a GHES entry in the HEST is probed. There may be multiple entries, so subsequent attempts to register ghes_edac are silently ignored as the work has already been done. When a GHES entry is unregistered, it calls ghes_edac_unregister(), which free()s the memory behind the global variables in ghes_edac. But there may be multiple GHES entries, the next call to ghes_edac_unregister() will dereference the free()d memory, and attempt to free it a second time. This may also be triggered on a platform with one GHES entry, if the driver is unbound/re-bound and unbound. The re-bind step will do nothing because of ghes_init, the second unbind will then do the same work as the first. Doing the unregister work on the first call is unsafe, as another CPU may be processing a notification in ghes_edac_report_mem_error(), using the memory we are about to free. ghes_init is already half of the reference counting. We only need to do the register work for the first call, and the unregister work for the last. Add the unregister check. This means we no longer free ghes_edac's memory while there are GHES entries that may receive a notification. This was detected by KASAN and DEBUG_TEST_DRIVER_REMOVE. [ bp: merge into a single patch. ] Fixes: 0fe5f281f749 ("EDAC, ghes: Model a single, logical memory controller") Reported-by: John Garry Signed-off-by: James Morse Signed-off-by: Borislav Petkov Cc: linux-edac Cc: Mauro Carvalho Chehab Cc: Robert Richter Cc: Tony Luck Cc: Link: https://lkml.kernel.org/r/20191014171919.85044-2-james.morse@arm.com Link: https://lkml.kernel.org/r/304df85b-8b56-b77e-1a11-aa23769f2e7c@huawei.com

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

2019-09-22T16:39:09Z

Pull ARM updates from Russell King: - fix various clang build and cppcheck issues - switch ARM to use new common outgoing-CPU-notification code - add some additional explanation about the boot code - kbuild "make clean" fixes - get rid of another "(____ptrval____)", this time for the VDSO code - avoid treating cache maintenance faults as a write - add a frame pointer unwinder implementation for clang - add EDAC support for Aurora L2 cache - improve robustness of adjust_lowmem_bounds() finding the bounds of lowmem. - add reset control for AMBA primecell devices * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (24 commits) ARM: 8906/1: drivers/amba: add reset control to amba bus probe ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address ARM: 8891/1: EDAC: armada_xp: Add support for more SoCs ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC ARM: 8892/1: EDAC: Add missing debugfs_create_x32 wrapper ARM: 8890/1: l2x0: add marvell,ecc-enable property for aurora ARM: 8889/1: dt-bindings: document marvell,ecc-enable binding ARM: 8886/1: l2x0: support parity-enable/disable on aurora ARM: 8885/1: aurora-l2: add defines for parity and ECC registers ARM: 8887/1: aurora-l2: add prefix to MAX_RANGE_SIZE ARM: 8902/1: l2c: move cache-aurora-l2.h to asm/hardware ARM: 8900/1: UNWINDER_FRAME_POINTER implementation for Clang ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes ARM: 8896/1: VDSO: Don't leak kernel addresses ARM: 8895/1: visit mach-* and plat-* directories when cleaning ARM: 8894/1: boot: Replace open-coded nop with macro ARM: 8893/1: boot: Explain the 8 nops ARM: 8876/1: fix O= building with CONFIG_FPE_FASTFPE ...

Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-09-17T01:47:53Z

Pull x86 cpu-feature updates from Ingo Molnar: - Rework the Intel model names symbols/macros, which were decades of ad-hoc extensions and added random noise. It's now a coherent, easy to follow nomenclature. - Add new Intel CPU model IDs: - "Tiger Lake" desktop and mobile models - "Elkhart Lake" model ID - and the "Lightning Mountain" variant of Airmont, plus support code - Add the new AVX512_VP2INTERSECT instruction to cpufeatures - Remove Intel MPX user-visible APIs and the self-tests, because the toolchain (gcc) is not supporting it going forward. This is the first, lowest-risk phase of MPX removal. - Remove X86_FEATURE_MFENCE_RDTSC - Various smaller cleanups and fixes * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) x86/cpu: Update init data for new Airmont CPU model x86/cpu: Add new Airmont variant to Intel family x86/cpu: Add Elkhart Lake to Intel family x86/cpu: Add Tiger Lake to Intel family x86: Correct misc typos x86/intel: Add common OPTDIFFs x86/intel: Aggregate microserver naming x86/intel: Aggregate big core graphics naming x86/intel: Aggregate big core mobile naming x86/intel: Aggregate big core client naming x86/cpufeature: Explain the macro duplication x86/ftrace: Remove mcount() declaration x86/PCI: Remove superfluous returns from void functions x86/msr-index: Move AMD MSRs where they belong x86/cpu: Use constant definitions for CPU models lib: Remove redundant ftrace flag removal x86/crash: Remove unnecessary comparison x86/bitops: Use __builtin_constant_p() directly instead of IS_IMMEDIATE() x86: Remove X86_FEATURE_MFENCE_RDTSC x86/mpx: Remove MPX APIs ...

EDAC/amd64: Add PCI device IDs for family 17h, model 70h

2019-09-07T05:29:27Z

Add the new Family 17h Model 70h PCI IDs (device 18h functions 0 and 6) to the AMD64 EDAC module. [ bp: s/f17_base_addr_to_cs_size/f17_addr_mask_to_cs_size/g ] Signed-off-by: Isaac Vaughn Signed-off-by: Borislav Petkov Cc: James Morse Cc: linux-edac@vger.kernel.org Cc: Mauro Carvalho Chehab Cc: Robert Richter Cc: Tony Luck Link: https://lkml.kernel.org/r/20190906192131.8ced0ca112146f32d82b6cae@knights.ucf.edu

EDAC/mc_sysfs: Make debug messages consistent

2019-09-04T09:39:19Z

Debug messages are inconsistently used in the error handlers. Some lack an error message, some are called regardless of the return status, messages for the same error are at different locations in the code depending on the error code. This happens esp. near put_device() calls. Make those debug messages more consistent. Additionally, unify the error messages to have the same terms for the same operations of the device. Signed-off-by: Robert Richter Signed-off-by: Borislav Petkov Reviewed-by: Mauro Carvalho Chehab Cc: "linux-edac@vger.kernel.org" Cc: James Morse Cc: Tony Luck Link: https://lkml.kernel.org/r/20190902123216.9809-5-rrichter@marvell.com