user/sven/linux.git/drivers/firewire/Kconfig, branch v4.11.3

firewire: IEEE 1394 (FireWire) support should depend on HAS_DMA

2014-07-13T18:53:25Z

Commit b3d681a4fc108f9653bbb44e4f4e72db2b8a5734 ("firewire: Use COMPILE_TEST for build testing") added COMPILE_TEST as an alternative dependency for the purpose of build testing the firewire core. However, this bypasses all other implicit dependencies assumed by PCI, like HAS_DMA. If NO_DMA=y: drivers/built-in.o: In function `fw_iso_buffer_destroy': (.text+0x36a096): undefined reference to `dma_unmap_page' drivers/built-in.o: In function `fw_iso_buffer_map_dma': (.text+0x36a164): undefined reference to `dma_map_page' drivers/built-in.o: In function `fw_iso_buffer_map_dma': (.text+0x36a172): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `sbp2_send_management_orb': sbp2.c:(.text+0x36c6b4): undefined reference to `dma_map_single' sbp2.c:(.text+0x36c6c8): undefined reference to `dma_mapping_error' sbp2.c:(.text+0x36c772): undefined reference to `dma_map_single' sbp2.c:(.text+0x36c786): undefined reference to `dma_mapping_error' sbp2.c:(.text+0x36c854): undefined reference to `dma_unmap_single' sbp2.c:(.text+0x36c872): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sbp2_map_scatterlist': sbp2.c:(.text+0x36ccbc): undefined reference to `scsi_dma_map' sbp2.c:(.text+0x36cd36): undefined reference to `dma_map_single' sbp2.c:(.text+0x36cd4e): undefined reference to `dma_mapping_error' sbp2.c:(.text+0x36cd84): undefined reference to `scsi_dma_unmap' drivers/built-in.o: In function `sbp2_unmap_scatterlist': sbp2.c:(.text+0x36cda6): undefined reference to `scsi_dma_unmap' sbp2.c:(.text+0x36cdc6): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `complete_command_orb': sbp2.c:(.text+0x36d6ac): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sbp2_scsi_queuecommand': sbp2.c:(.text+0x36d8e0): undefined reference to `dma_map_single' sbp2.c:(.text+0x36d8f6): undefined reference to `dma_mapping_error' Add an explicit dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven Reviewed-by: Jean Delvare Signed-off-by: Stefan Richter

firewire: Use COMPILE_TEST for build testing

2014-05-17T13:59:08Z

Stop using BROKEN as an alternative dependency for the purpose of build testing the firewire core. The newly introduced COMPILE_TEST is better suited for that purpose. Signed-off-by: Jean Delvare Signed-off-by: Stefan Richter

firewire net, ipv6: IPv6 over Firewire (RFC3146) support.

2013-03-26T16:32:13Z

Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller

firewire: ohci: move runtime debug facility out of #ifdef

2012-03-10T16:41:19Z

CONFIG_FIREWIRE_OHCI_DEBUG could have been exposed to kernel tweakers if CONFIG_EXPERT was set. But in hindsight, this stuff is far too useful to omit it. So get rid of two #else branches that are only going to bitrot otherwise. Signed-off-by: Stefan Richter

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

2011-03-21T17:05:22Z

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: ignore link-active bit of new nodes, fix device recognition firewire: sbp2: revert obsolete 'fix stall with "Unsolicited response"' firewire: core: increase default SPLIT_TIMEOUT value firewire: ohci: Misleading kfree in ohci.c::pci_probe/remove firewire: ohci: omit IntEvent.busReset check rom AT queueing firewire: ohci: prevent starting of iso contexts with empty queue firewire: ohci: prevent iso completion callbacks after context stop firewire: core: rename some variables firewire: nosy: should work on Power Mac G4 PCI too firewire: core: fix card->reset_jiffies overflow firewire: cdev: remove unneeded reference firewire: cdev: always wait for outbound transactions to complete firewire: cdev: remove unneeded idr_find() from complete_transaction() firewire: ohci: log dead DMA contexts

firewire: nosy: should work on Power Mac G4 PCI too

2011-02-26T14:11:03Z

The first board generation of Power Mac G4 ("Yikes!", those with PCI graphics) still had a PCILynx controller like their G3 predecessors, but not the later AGP models. (Jonathan Woithe recalls to have heard of it, and some web sources reinforce it.) Signed-off-by: Stefan Richter

firewire: net: is not experimental anymore

2011-01-20T23:36:00Z

thanks to Clemens' and Maxim's fixes to firewire-ohci and -net in the last two kernel releases. Signed-off-by: Stefan Richter

firewire: ohci: Asynchronous Reception rewrite

2010-12-13T19:39:13Z

Move the AR DMA descriptors out of the buffer pages, and map the buffer pages linearly into the kernel's address space. This allows the driver to ignore any page boundaries in the DMA data and thus to avoid any copying around of packet payloads. This fixes the bug where S800 packets that are so big (> 4080 bytes) that they can be split over three pages were not handled correctly. Due to the changed algorithm, we can now use arbitrarily many buffer pages, which improves performance because the controller can more easily unload its DMA FIFO. Furthermore, using streaming DMA mappings should improve perfomance on architectures where coherent DMA mappings are not cacheable. Even on other architectures, the caching behaviour should be improved slightly because the CPU no longer writes to the buffer pages. v2: Detect the last filled buffer page by searching the descriptor's residual count value fields in order (like in the old code), instead of going backwards through the transfer status fields; it looks as if some controllers do not set the latter correctly. v3: Fix an old resume bug that would now make the handler run into a BUG_ON, and replace that check with more useful error handling. Increase the buffer size for better performance with non-TI chips. Signed-off-by: Clemens Ladisch Maxim Levitsky writes: Works almost perfectly. I can still see RCODE_BUSY errors sometimes, not very often though. 64K here eliminates these errors completely. This is most likely due to nouveau drivers and lowest perf level I use to lower card temperature. That increases latencies too much I think. Besides that the IO is just perfect. Tested-by: Maxim Levitsky Signed-off-by: Stefan Richter

ieee1394: remove the old IEEE 1394 driver stack

2010-10-11T12:48:03Z

The drivers - ohci1394 (controller driver) - ieee1394 (core) - dv1394, raw1394, video1394 (userspace ABI) - eth1394, sbp2 (protocol drivers) are replaced by - firewire-ohci (controller driver) - firewire-core (core and userspace ABI) - firewire-net, firewire-sbp2 (protocol drivers) which are more featureful, better performing, and more secure than the older drivers; all with a smaller and more modern code base. The driver firedtv in drivers/media/dvb/firewire/ contains backends to both ieee1394 and firewire-core. Its ieee1394 backend code can be removed in an independent commit; firedtv as-is builds and works fine without ieee1394. The driver pcilynx (an incomplete controller driver) is deleted without replacement since PCILynx cards are extremely rare. Owners of these cards use them with the stand-alone bus sniffer driver nosy instead. The drivers nosy and init_ohci1394_dma which do not interact with either of the two IEEE 1394 stacks are not affected by the ieee1394 subsystem removal. There are still some issues with the newer firewire subsystem compared to the older one: - The rare and quirky controllers ALi M52xx, Apple UniNorth v1, NVIDIA NForce2 are even less well supported by firewire-ohci than by ohci1394. I am looking into the M52xx issue. - The experimental firewire-net is reportedly less stable than its experimental cousin eth1394. - Audio playback of a certain group of audio devices (ones based on DICE chipset with EAP; supported by prerelease FFADO code) does not work yet. This issue is still under investigation. - There were some ieee1394 based out-of-the-mainline drivers. Of them, only lisight, an audio driver for iSight webcams, seems still useful. Work is underway to reimplement it on top of firewire-core. All these remainig issues are minor; they should not stand in the way of overall better user experience of IEEE 1394 on Linux, together with a reduction in support efforts and maintenance burden. The coexistence of two IEEE 1394 kernel driver stacks in the mainline since 2.6.22 shall end now, as announced earlier this year. Signed-off-by: Stefan Richter

tools/firewire: add userspace front-end of nosy

2010-07-27T09:04:11Z

This adds nosy-dump, the userspace part of nosy, the IEEE 1394 traffic sniffer for Texas Instruments PCILynx/ PCILynx2 based cards. Author is Kristian Høgsberg. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Parts pertaining to the kernel module removed from Makefile. - dist target removed from the Makefile. - Mentioned nosy-dump in the Kconfig help to nosy's kernel component. - Add copyright notice to nosy-dump.c. This is a duplicate of the respective notice in the kernel component nosy.c except for a time span of 2002 - 2006, according to Kristian's git log. "git shortlog decode-fcp.c list.h nosy-dump.[ch]" from nosy's git repository: Jonathan Woithe (1): Save logs on Ctrl-C Kristian Høgsberg (11): Pull over nosy from mercurial repo. Remove some fields from default view, add logging feature. Use infinite time out for poll(), mark more detail fields. Fix byte ordering macro. Add decoding of iso data and lock packets. Add flag to indicate data length field. Add cycle start packet decoding, add --iso and --cycle-start flags. Distinguish between phy-packets and 0-length iso data. Fix transaction and stats view. Add simple AV/C decoder. Don't break down on big payloads. Signed-off-by: Stefan Richter Acked-by: Kristian Høgsberg