user/sven/linux.git/drivers/firewire/net.c, branch v3.4.40

firewire: net: Fix handling of fragmented multicast/broadcast packets.

2013-01-17T16:50:43Z

commit 9d2373420900a39f5212a3b289331aa3535b1000 upstream. This patch fixes both the transmit and receive portion of sending fragmented mutlicast and broadcast packets. The transmit section was broken because the offset for INTFRAG and LASTFRAG packets were just miscalculated by IEEE1394_GASP_HDR_SIZE (which was reserved with skb_push() in fwnet_send_packet). The receive section was broken because in fwnet_incoming_packet is a call to fwnet_peer_find_by_node_id(). Called with generation == -1 it will not find a peer and the partial datagrams are associated to a peer. [Stefan R: The fix to use context->card->generation is not perfect. It relies on the IR tasklet which processes packets from the prior bus generation to run before the self-ID-complete worklet which sets the current card generation. Alas, there is no simple way of a race-free implementation. Let's do it this way for now.] Signed-off-by: Stephan Gatzka Signed-off-by: Stefan Richter Signed-off-by: Greg Kroah-Hartman

firewire: net: use dev_printk API

2012-02-22T21:36:00Z

Change the log line prefix from "firewire_net: " to "net firewire0: " etc. for the case that several RFC 2734 interfaces are being used in the same machine. Note, the netdev_printk API is not very useful to firewire-net. netdev_notice(net, "abc\n") would result in irritating messages like "firewire_ohci 0000:0a:00.0: firewire0: abc". Nor would a dev_printk on the fw_unit.device to which firewire-net is being bound be useful, because there are generally multiple ones of those per interface (from all RFC 2734 peers on the bus, the local node being only one of them). In the initialization message of each interface, log the PCI device name of the card which is parent of the netdevice instead of the GUID of the peer which was semi-randomly used to establish the netdevice. Signed-off-by: Stefan Richter

firewire: net: identify to driver core as "firewire_net", not "net"

2012-02-22T21:36:00Z

On second thought, there is little reason to have driver name differ from module name. Therefore, change /sys/bus/firewire/drivers/net /sys/bus/firewire/devices/fw0.0/driver -> [...]/net /sys/module/firewire_net/drivers/firewire:net to /sys/bus/firewire/drivers/firewire_net /sys/bus/firewire/devices/fw0.0/driver -> [...]/firewire_net /sys/module/firewire_net/drivers/firewire:firewire_net It is redundant but consistent with firewire-sbp2's recently changed driver name. I don't see this anywhere used, so it should not matter either way. Signed-off-by: Stefan Richter

firewire: net: Use posted writes

2011-10-09T15:00:18Z

Change memory region to ohci "middle address space". This effectively reduces the number of packets by 50%. [Stefan R.:] This eliminates 1394 ack packets and improved throughput by a few percent in some tests with an S400a connection with and without gap count optimization. Since firewire-net taxes the AR-req DMA unit of a FireWire controller much more than firewire-sbp2 (which uses the middle address space with PCI posted writes too), this commit also changes a related error printk into a ratelimited one as a precaution. Side note: The IPv4-over-1394 drivers of Mac OS X 10.4, Windows XP SP3, and the Thesycon 1394 bus driver for Windows all use the middle address space too. Signed-off-by: Stephan Gatzka Signed-off-by: Stefan Richter

firewire: use clamp and min3 macros

2011-10-09T15:00:18Z

Use kernel.h's convenience macros. Also omit a printk that should never happen and won't matter much if it ever happened. Signed-off-by: Stefan Richter

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

2011-07-22T21:49:48Z

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: document the sysfs ABIs firewire: cdev: ABI documentation enhancements firewire: cdev: prevent race between first get_info ioctl and bus reset event queuing firewire: cdev: return -ENOTTY for unimplemented ioctls, not -EINVAL firewire: ohci: skip soft reset retries after card ejection firewire: ohci: fix PHY reg access after card ejection firewire: ohci: add a comment on PHY reg access serialization firewire: ohci: reduce potential context_stop latency firewire: ohci: remove superfluous posted write flushes firewire: net: replacing deprecated __attribute__((packed)) with __packed

net: Push protocol type directly down to header_ops->cache()

2011-07-13T09:29:59Z

Signed-off-by: David S. Miller

firewire: net: replacing deprecated attribute((packed)) with __packed

2011-06-02T11:58:33Z

Fixing a deprecation, replacing __attribute__((packed)) with __packed. It was deprecated for portability, specifically to avoid GCC specific code. See commit 82ddcb040570411fc2d421d96b3e69711c670328. Signed-off-by: August Lilleaas Signed-off-by: Stefan Richter (added include compiler.h)

firewire: optimize iso queueing by setting wake only after the last packet

2011-05-10T20:53:45Z

When queueing iso packets, the run time is dominated by the two MMIO accesses that set the DMA context's wake bit. Because most drivers submit packets in batches, we can save much time by removing all but the last wakeup. The internal kernel API is changed to require a call to fw_iso_context_queue_flush() after a batch of queued packets. The user space API does not change, so one call to FW_CDEV_IOC_QUEUE_ISO must specify multiple packets to take advantage of this optimization. In my measurements, this patch reduces the time needed to queue fifty skip packets from userspace to one sixth on a 2.5 GHz CPU, or to one third at 800 MHz. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter

Fix common misspellings

2011-03-31T14:26:23Z

Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi