user/sven/linux.git/drivers/firewire, branch v4.4.2

Merge tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

2015-11-11T18:21:34Z

Pull firewire fix from Stefan Richter: "Work around JMicron initialization quirk, which ffected isochronous transmission, e.g. audio via FFADO or ALSA" * tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: fix JMicron JMB38x IT context discovery

mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd

2015-11-07T01:50:42Z

__GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman Acked-by: Vlastimil Babka Acked-by: Michal Hocko Acked-by: Johannes Weiner Cc: Christoph Lameter Cc: David Rientjes Cc: Vitaly Wool Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

firewire: ohci: fix JMicron JMB38x IT context discovery

2015-11-05T13:17:30Z

Reported by Clifford and Craig for JMicron OHCI-1394 + SDHCI combo controllers: Often or even most of the time, the controller is initialized with the message "added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10". With 0 isochronous transmit DMA contexts (IT contexts), applications like audio output are impossible. However, OHCI-1394 demands that at least 4 IT contexts are implemented by the link layer controller, and indeed JMicron JMB38x do implement four of them. Only their IsoXmitIntMask register is unreliable at early access. With my own JMB381 single function controller I found: - I can reproduce the problem with a lower probability than Craig's. - If I put a loop around the section which clears and reads IsoXmitIntMask, then either the first or the second attempt will return the correct initial mask of 0x0000000f. I never encountered a case of needing more than a second attempt. - Consequently, if I put a dummy reg_read(...IsoXmitIntMaskSet) before the first write, the subsequent read will return the correct result. - If I merely ignore a wrong read result and force the known real result, later isochronous transmit DMA usage works just fine. So let's just fix this chip bug up by the latter method. Tested with JMB381 on kernel 3.13 and 4.3. Since OHCI-1394 generally requires 4 IT contexts at a minium, this workaround is simply applied whenever the initial read of IsoXmitIntMask returns 0, regardless whether it's a JMicron chip or not. I never heard of this issue together with any other chip though. I am not 100% sure that this fix works on the OHCI-1394 part of JMB380 and JMB388 combo controllers exactly the same as on the JMB381 single- function controller, but so far I haven't had a chance to let an owner of a combo chip run a patched kernel. Strangely enough, IsoRecvIntMask is always reported correctly, even though it is probed right before IsoXmitIntMask. Reported-by: Clifford Dunn Reported-by: Craig Moore Cc: stable@vger.kernel.org Signed-off-by: Stefan Richter

scsi: Do not set cmd_per_lun to 1 in the host template

2015-06-01T01:06:28Z

'0' is now used as the default cmd_per_lun value, so there's no need to explicitly set it to '1' in the host template. Signed-off-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: James Bottomley

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-03-04T02:16:48Z

Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller

net: Kill dev_rebuild_header

2015-03-02T21:43:41Z

Now that there are no more users kill dev_rebuild_header and all of it's implementations. This is long overdue. Signed-off-by: "Eric W. Biederman" Signed-off-by: David S. Miller

firewire: core: use correct vendor/model IDs

2015-02-02T20:56:03Z

The kernel was using the vendor ID 0xd00d1e, which was inherited from the old ieee1394 driver stack. However, this ID was not registered, and invalid. Instead, use the vendor/model IDs that are now officially assigned to the kernel: https://ieee1394.wiki.kernel.org/index.php/IEEE_OUI_Assignments [stefanr: - The vendor ID 001f11 is Openmoko, Inc.'s identifier, registered at IEEE Registration Authority. - The range of model IDs 023900...0239ff are the Linux kernel 1394 subsystem's identifiers, registered at Openmoko. - Model ID 023901 is picked by the subsystem developers as firewire-core's model ID.] Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter

firewire: sbp2: remove redundant check for bidi command

2015-01-31T14:27:40Z

[Bart van Asche:] SCSI core never sets cmd->sc_data_direction to DMA_BIDIRECTIONAL; scsi_bidi_cmnd(cmd) should be used instead to test for a bidirectional command. [Christoph Hellwig:] Bidirectional commands won't ever be queued anyway, unless a LLD or transport driver sets QUEUE_FLAG_BIDI. So, simply remove the respective queuecommand check in the SBP-2 transport driver. Signed-off-by: Stefan Richter

firewire: ohci: Remove unused function

2015-01-22T10:08:52Z

Remove the function ar_prev_buffer_index() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist Signed-off-by: Stefan Richter

firewire: sbp2: replace card lock by target lock

2014-12-10T19:53:21Z

firewire-core uses fw_card.lock to protect topology data and transaction data. firewire-sbp2 uses fw_card.lock for entirely unrelated purposes. Introduce a sbp2_target.lock to firewire-sbp2 and replace all fw_card.lock uses in the driver. fw_card.lock is now entirely private to firewire-core. This has no immediate advantage apart from making it clear in the code that firewire-sbp2 does not interact with the core via the core lock. Signed-off-by: Stefan Richter