user/sven/linux.git/drivers/firewire, branch v6.5.9

scsi: sd: Differentiate system and runtime start/stop management

2023-10-06T11:16:22Z

commit 3cc2ffe5c16dc65dfac354bc5b5bc98d3b397567 upstream. The underlying device and driver of a SCSI disk may have different system and runtime power mode control requirements. This is because runtime power management affects only the SCSI disk, while system level power management affects all devices, including the controller for the SCSI disk. For instance, issuing a START STOP UNIT command when a SCSI disk is runtime suspended and resumed is fine: the command is translated to a STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY command to wake it up. The SCSI disk runtime operations have no effect on the ata port device used to connect the ATA disk. However, for system suspend/resume operations, the ATA port used to connect the device will also be suspended and resumed, with the resume operation requiring re-validating the device link and the device itself. In this case, issuing a VERIFY command to spinup the disk must be done before starting to revalidate the device, when the ata port is being resumed. In such case, we must not allow the SCSI disk driver to issue START STOP UNIT commands. Allow a low level driver to refine the SCSI disk start/stop management by differentiating system and runtime cases with two new SCSI device flags: manage_system_start_stop and manage_runtime_start_stop. These new flags replace the current manage_start_stop flag. Drivers setting the manage_start_stop are modifed to set both new flags, thus preserving the existing start/stop management behavior. For backward compatibility, the old manage_start_stop sysfs device attribute is kept as a read-only attribute showing a value of 1 for devices enabling both new flags and 0 otherwise. Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

Revert "firewire: core: obsolete usage of GFP_ATOMIC at building node tree"

2023-09-23T09:14:34Z

commit 3c70de9b580998e5d644f4e80a9944c30aa1197b upstream. This reverts commit 06f45435d985d60d7d2fe2424fbb9909d177a63d. John Ogness reports the case that the allocation is in atomic context under acquired spin-lock. [ 12.555784] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306 [ 12.555808] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 70, name: kworker/1:2 [ 12.555814] preempt_count: 1, expected: 0 [ 12.555820] INFO: lockdep is turned off. [ 12.555824] irq event stamp: 208 [ 12.555828] hardirqs last enabled at (207): [] ._raw_spin_unlock_irq+0x44/0x80 [ 12.555850] hardirqs last disabled at (208): [] .__schedule+0x854/0xfe0 [ 12.555859] softirqs last enabled at (188): [] .addrconf_verify_rtnl+0x2c4/0xb70 [ 12.555872] softirqs last disabled at (182): [] .addrconf_verify_rtnl+0x70/0xb70 [ 12.555884] CPU: 1 PID: 70 Comm: kworker/1:2 Tainted: G S 6.6.0-rc1 #1 [ 12.555893] Hardware name: PowerMac7,2 PPC970 0x390202 PowerMac [ 12.555898] Workqueue: firewire_ohci .bus_reset_work [firewire_ohci] [ 12.555939] Call Trace: [ 12.555944] [c000000009677830] [c0000000010d83c0] .dump_stack_lvl+0x8c/0xd0 (unreliable) [ 12.555963] [c0000000096778b0] [c000000000140270] .__might_resched+0x320/0x340 [ 12.555978] [c000000009677940] [c000000000497600] .__kmem_cache_alloc_node+0x390/0x460 [ 12.555993] [c000000009677a10] [c0000000003fe620] .__kmalloc+0x70/0x310 [ 12.556007] [c000000009677ac0] [c0003d00004e2268] .fw_core_handle_bus_reset+0x2c8/0xba0 [firewire_core] [ 12.556060] [c000000009677c20] [c0003d0000491190] .bus_reset_work+0x330/0x9b0 [firewire_ohci] [ 12.556079] [c000000009677d10] [c00000000011d0d0] .process_one_work+0x280/0x6f0 [ 12.556094] [c000000009677e10] [c00000000011d8a0] .worker_thread+0x360/0x500 [ 12.556107] [c000000009677ef0] [c00000000012e3b4] .kthread+0x154/0x160 [ 12.556120] [c000000009677f90] [c00000000000bfa8] .start_kernel_thread+0x10/0x14 Cc: stable@kernel.org Reported-by: John Ogness Link: https://lore.kernel.org/lkml/87jzsuv1xk.fsf@jogness.linutronix.de/raw Signed-off-by: Takashi Sakamoto Signed-off-by: Greg Kroah-Hartman

firewire: net: fix use after free in fwnet_finish_incoming_packet()

2023-06-24T05:03:46Z

The netif_rx() function frees the skb so we can't dereference it to save the skb->len. Signed-off-by: Zhang Shurong Link: https://lore.kernel.org/r/tencent_3B3D24B66ED66A6BB73CC0E63C6A14E45109@qq.com Signed-off-by: Takashi Sakamoto

firewire: core: obsolete usage of GFP_ATOMIC at building node tree

2023-06-05T22:54:52Z

The flag of GFP_ATOMIC is given to the call of kmalloc when building node tree, but the call is not atomic context. The call of fw_core_handle_bus_reset() and fw_core_remove_card() builds the tree, while they are done in specific workqueue or pci remove callback. This commit obsolete the usage of GFP_ATOMIC. Link: https://lore.kernel.org/r/20230604070255.172700-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto

firewire: ohci: release buffer for AR req/resp contexts when managed resource is released

2023-06-05T22:54:24Z

The 1394 OHCI driver allocates several non-coherent DMA buffers for AR request and response contexts. The buffers are mapped to kernel virtual address (VMA) so that the first page locates after the last page. Even when large payload of packet is handled crossing the boundary of buffers, the driver operates continuously on VMA. No kernel API is provided for this kind of mapping, while it is possible to release the buffer when PCI device is going to be released. This commit moves the call of release helper function to the callback function of release resources. Link: https://lore.kernel.org/r/20230604054451.161076-10-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto

firewire: ohci: use devres for content of configuration ROM

2023-06-05T22:54:23Z

The 1394 OHCI driver allocates DMA coherent buffer to transfer content of configuration ROM. This commit utilizes managed device resource to maintain the lifetime of buffer. Link: https://lore.kernel.org/r/20230604054451.161076-9-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto

firewire: ohci: use devres for IT, IR, AT/receive, and AT/request contexts

2023-06-05T22:54:23Z

The 1394 OHCI driver allocates DMA coherent buffer for descriptors of IT, IR, AT receive, and AT request contexts by the same way. This commit utilizes managed device resource to maintain the lifetime of buffers. Link: https://lore.kernel.org/r/20230604054451.161076-8-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto

firewire: ohci: use devres for list of isochronous contexts

2023-06-05T22:54:23Z

The 1394 OHCI driver allocates the list of isochronous contexts as much as the hardware supports. This commit utilizes managed device resource to maintain the lifetime of list. Link: https://lore.kernel.org/r/20230604054451.161076-7-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto

firewire: ohci: use devres for requested IRQ

2023-06-05T22:54:23Z

The 1394 OHCI controller register handler to single interrupt number. This commit uses managed device resource to maintain the lifetime of requested IRQ. Link: https://lore.kernel.org/r/20230604054451.161076-6-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto

firewire: ohci: use devres for misc DMA buffer

2023-06-05T22:54:23Z

The 1394 OHCI driver allocates a DMA coherent buffer for multi-purposes. The buffer is split into three region for specific purposes; i.e. 1/4 for context descriptors of AR request and response as well as 1/2 for self ID handling. This commit uses managed device resource to maintain the lifetime of buffer. Link: https://lore.kernel.org/r/20230604054451.161076-5-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto