user/sven/linux.git/drivers/firmware, branch v6.1.72

firmware: arm_scmi: Fix frequency truncation by promoting multiplier type

2024-01-10T16:10:32Z

[ Upstream commit 8e3c98d9187e09274fc000a7d1a77b070a42d259 ] Fix the possible frequency truncation for all values equal to or greater 4GHz on 64bit machines by updating the multiplier 'mult_factor' to 'unsigned long' type. It is also possible that the multiplier itself can be greater than or equal to 2^32. So we need to also fix the equation computing the value of the multiplier. Fixes: a9e3fbfaa0ff ("firmware: arm_scmi: add initial support for performance protocol") Reported-by: Sibi Sankar Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/ Cc: Cristian Marussi Link: https://lore.kernel.org/r/20231130204343.503076-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

firmware: qcom_scm: use 64-bit calling convention only when client is 64-bit

2023-11-28T17:07:12Z

commit 3337a6fea25370d3d244ec6bb38c71ee86fcf837 upstream. Per the "SMC calling convention specification", the 64-bit calling convention can only be used when the client is 64-bit. Whereas the 32-bit calling convention can be used by either a 32-bit or a 64-bit client. Currently during SCM probe, irrespective of the client, 64-bit calling convention is made, which is incorrect and may lead to the undefined behaviour when the client is 32-bit. Let's fix it. Cc: stable@vger.kernel.org Fixes: 9a434cee773a ("firmware: qcom_scm: Dynamically support SMCCC and legacy conventions") Reviewed-By: Elliot Berman Signed-off-by: Kathiravan Thirumoorthy Link: https://lore.kernel.org/r/20230925-scm-v3-1-8790dff6a749@quicinc.com Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman

firmware: arm_ffa: Allow the FF-A drivers to use 32bit mode of messaging

2023-11-20T10:52:03Z

[ Upstream commit 2d698e8b4fd22374dac0a2d5150ab24d57a222ab ] An FF-A ABI could support both the SMC32 and SMC64 conventions. A callee that runs in the AArch64 execution state and implements such an ABI must implement both SMC32 and SMC64 conventions of the ABI. So the FF-A drivers will need the option to choose the mode irrespective of FF-A version and the partition execution mode flag in the partition information. Let us remove the check on the FF-A version for allowing the selection of 32bit mode of messaging. The driver will continue to set the 32-bit mode if the partition execution mode flag specified that the partition supports only 32-bit execution. Fixes: 106b11b1ccd5 ("firmware: arm_ffa: Set up 32bit execution mode flag using partiion property") Link: https://lore.kernel.org/r/20231005142823.278121-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

firmware: arm_ffa: Assign the missing IDR allocation ID to the FFA device

2023-11-20T10:52:03Z

[ Upstream commit 7d0bc6360f17ea323ab25939a34857123d7d87e5 ] Commit 19b8766459c4 ("firmware: arm_ffa: Fix FFA device names for logical partitions") added an ID to the FFA device using ida_alloc() and append the same to "arm-ffa" to make up a unique device name. However it missed to stash the id value in ffa_dev to help freeing the ID later when the device is destroyed. Due to the missing/unassigned ID in FFA device, we get the following warning when the FF-A device is unregistered. | ida_free called for id=0 which is not allocated. | WARNING: CPU: 7 PID: 1 at lib/idr.c:525 ida_free+0x114/0x164 | CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc4 #209 | pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : ida_free+0x114/0x164 | lr : ida_free+0x114/0x164 | Call trace: | ida_free+0x114/0x164 | ffa_release_device+0x24/0x3c | device_release+0x34/0x8c | kobject_put+0x94/0xf8 | put_device+0x18/0x24 | klist_devices_put+0x14/0x20 | klist_next+0xc8/0x114 | bus_for_each_dev+0xd8/0x144 | arm_ffa_bus_exit+0x30/0x54 | ffa_init+0x68/0x330 | do_one_initcall+0xdc/0x250 | do_initcall_level+0x8c/0xac | do_initcalls+0x54/0x94 | do_basic_setup+0x1c/0x28 | kernel_init_freeable+0x104/0x170 | kernel_init+0x20/0x1a0 | ret_from_fork+0x10/0x20 Fix the same by actually assigning the ID in the FFA device this time for real. Fixes: 19b8766459c4 ("firmware: arm_ffa: Fix FFA device names for logical partitions") Link: https://lore.kernel.org/r/20231003085932.3553985-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

firmware: ti_sci: Mark driver as non removable

2023-11-20T10:52:02Z

[ Upstream commit 7b7a224b1ba1703583b25a3641ad9798f34d832a ] The TI-SCI message protocol provides a way to communicate between various compute processors with a central system controller entity. It provides the fundamental device management capability and clock control in the SOCs that it's used in. The remove function failed to do all the necessary cleanup if there are registered users. Some things are freed however which likely results in an oops later on. Ensure that the driver isn't unbound by suppressing its bind and unbind sysfs attributes. As the driver is built-in there is no way to remove device once bound. We can also remove the ti_sci_remove call along with the ti_sci_debugfs_destroy as there are no callers for it any longer. Fixes: aa276781a64a ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol") Reported-by: Uwe Kleine-König Closes: https://lore.kernel.org/linux-arm-kernel/20230216083908.mvmydic5lpi3ogo7@pengutronix.de/ Suggested-by: Uwe Kleine-König Acked-by: Uwe Kleine-König Signed-off-by: Dhruva Gole Link: https://lore.kernel.org/r/20230921091025.133130-1-d-gole@ti.com Signed-off-by: Nishanth Menon Signed-off-by: Sasha Levin

efi: fix memory leak in krealloc failure handling

2023-11-08T13:10:59Z

[ Upstream commit 0d3ad1917996839a5042d18f04e41915cfa1b74a ] In the previous code, there was a memory leak issue where the previously allocated memory was not freed upon a failed krealloc operation. This patch addresses the problem by releasing the old memory before setting the pointer to NULL in case of a krealloc failure. This ensures that memory is properly managed and avoids potential memory leaks. Signed-off-by: Kuan-Wei Chiu Signed-off-by: Ard Biesheuvel Signed-off-by: Sasha Levin

firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels()

2023-11-02T08:35:25Z

[ Upstream commit 1558b1a8dd388f5fcc3abc1e24de854a295044c3 ] dsp_chan->name and chan_name points to same block of memory, because dev_err still needs to be used it,so we need free it's memory after use to avoid use_after_free. Fixes: e527adfb9b7d ("firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels()") Signed-off-by: Hao Ge Reviewed-by: Daniel Baluta Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

firmware: cirrus: cs_dsp: Only log list of algorithms in debug build

2023-10-06T12:56:56Z

[ Upstream commit 69343ce91435f222052015c5af86b550391bac85 ] Change the logging of each algorithm from info level to debug level. On the original devices supported by this code there were typically only one or two algorithms in a firmware and one or two DSPs so this logging only used a small number of log lines. However, for the latest devices there could be 30-40 algorithms in a firmware and 8 DSPs being loaded in parallel, so using 300+ lines of log for information that isn't particularly important to have logged. Signed-off-by: Richard Fitzgerald Link: https://lore.kernel.org/r/20230913160523.3701189-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND

2023-10-06T12:56:50Z

[ Upstream commit 9dda1178479aa0a73fe0eaabfe2d9a1c603cfeed ] As per the FF-A specification: section "Usage of other memory region attributes", in a transaction to donate memory or lend memory to a single borrower, if the receiver is a PE or Proxy endpoint, the owner must not specify the attributes and the relayer will return INVALID_PARAMETERS if the attributes are set. Let us not set the memory region attributes for MEM_LEND. Fixes: 82a8daaecfd9 ("firmware: arm_ffa: Add support for MEM_LEND") Reported-by: Joao Alves Reported-by: Olivier Deprez Link: https://lore.kernel.org/r/20230919-ffa_v1-1_notif-v2-13-6f3a3ca3923c@arm.com Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels()

2023-10-06T12:56:48Z

[ Upstream commit e527adfb9b7d9d05a4577c116519e59a2bda4b05 ] If mbox_request_channel_byname() fails, the memory allocated a few lines above still need to be freed before going to the error handling path. Fixes: 046326989a18 ("firmware: imx: Save channel name for further use") Signed-off-by: Christophe JAILLET Reviewed-by: Daniel Baluta Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin