user/sven/linux.git/drivers/fpga, branch v5.13

Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2021-04-26T19:11:52Z

Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...

fpga: dfl: pci: add DID for D5005 PAC cards

2021-04-06T00:46:56Z

This patch adds the approved PCI Express Device IDs for the PF and VF for the card for D5005 PAC cards. Signed-off-by: Russ Weight Signed-off-by: Matthew Gerlach Signed-off-by: Moritz Fischer

fpga: dfl: afu: harden port enable logic

2021-03-24T18:15:04Z

Port enable is not complete until ACK = 0. Change __afu_port_enable() to guarantee that the enable process is complete by polling for ACK == 0. Signed-off-by: Russ Weight Reviewed-by: Tom Rix Reviewed-by: Matthew Gerlach Acked-by: Wu Hao Signed-off-by: Moritz Fischer

fpga: altera: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs

2021-03-23T16:03:36Z

ARCH_SOCFPGA is being renamed to ARCH_INTEL_SOCFPGA so adjust the 32-bit ARM drivers to rely on new symbol. Acked-by: Moritz Fischer Signed-off-by: Krzysztof Kozlowski Signed-off-by: Dinh Nguyen

arm64: socfpga: merge Agilex and N5X into ARCH_INTEL_SOCFPGA

2021-03-23T16:03:36Z

Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and SoC-part. Up to a point that N5X uses the same DTSI as Agilex. From the Linux kernel point of view these are flavors of the same architecture so there is no need for three top-level arm64 architectures. Simplify this by merging all three architectures into ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries. The side effect is that the INTEL_STRATIX10_SERVICE will now be available for both 32-bit and 64-bit Intel SoCFPGA, even though it is used only for 64-bit. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Dinh Nguyen

fpga: Add support for Xilinx DFX AXI Shutdown manager

2021-03-06T15:54:40Z

This patch adds support for Xilinx Dynamic Function eXchange(DFX) AXI shutdown manager IP. It can be used to safely handling the AXI traffic on a Reconfigurable Partition when it is undergoing dynamic reconfiguration and there by preventing system deadlock that may occur if AXI transactions are interrupted during reconfiguration. PR-Decoupler and AXI shutdown manager are completely different IPs. But both the IP registers are compatible and also both belong to the same sub-system (fpga-bridge).So using same driver for both IP's. Signed-off-by: Nava kishore Manne Reviewed-by: Tom Rix Signed-off-by: Moritz Fischer

fpga: xilinx-pr-decoupler: Simplify code by using dev_err_probe()

2021-03-06T15:39:17Z

Use already prepared dev_err_probe() introduced by commit a787e5400a1c ("driver core: add device probe log helper"). It simplifies EPROBE_DEFER handling. Signed-off-by: Michal Simek Signed-off-by: Moritz Fischer

fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER

2021-03-06T15:39:17Z

The current code produces an error message on devm_gpiod_get() errors even when the error is -EPROBE_DEFER, which should be silent. This has been observed producing a significant amount of messages like: xlnx-slave-spi spi1.1: Failed to get PROGRAM_B gpio: -517 Fix and simplify code by using the dev_err_probe() helper function. Signed-off-by: Luca Ceresoli Fixes: dd2784c01d93 ("fpga manager: xilinx-spi: check INIT_B pin during write_init") Fixes: 061c97d13f1a ("fpga manager: Add Xilinx slave serial SPI driver") Signed-off-by: Moritz Fischer

Merge tag 'fpga-cleanup-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next

2021-01-12T09:19:14Z

Moritz writes: First set of FPGA Manager changes for 5.12-rc1 This is the first set of changes for the FPGA Manager 5.12-rc1 mergewindow. DFL: - Minor cleanup, constifying a static attribute group Core: - Minor cleanup, using DEFINE_SPINLOCK over open coding it All patches have been reviewed on the mailing list, and have been in the last linux-next releases (as part of my for-next branch) without issues. Signed-off-by: Moritz Fischer * tag 'fpga-cleanup-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: fme: Constify static attribute_group structs fpga: Use DEFINE_SPINLOCK() for spinlock

fpga: dfl: fme: Constify static attribute_group structs

2021-01-10T18:57:14Z

The only usage of these is to put their addresses in arrays of pointers to const attribute_groups. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn Reviewed-by: Tom Rix Signed-off-by: Moritz Fischer