user/sven/linux.git/drivers/gpio, branch v4.14.105

gpio: pcf857x: Fix interrupts on multiple instances

2019-02-06T16:31:35Z

commit 2486e67374aa8b7854c2de32869642c2873b3d53 upstream. When multiple instances of pcf857x chips are present, a fix up message [1] is printed during the probe of the 2nd and later instances. The issue is that the driver is using the same irq_chip data structure between multiple instances. Fix this by allocating the irq_chip data structure per instance. [1] fix up message addressed by this patch [ 1.212100] gpio gpiochip9: (pcf8575): detected irqchip that is shared with multiple gpiochips: please fix the driver. Cc: Stable Signed-off-by: Roger Quadros Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman

gpio: altera-a10sr: Set proper output level for direction_output

2019-02-06T16:31:35Z

commit 2095a45e345e669ea77a9b34bdd7de5ceb422f93 upstream. The altr_a10sr_gpio_direction_output should set proper output level based on the value argument. Fixes: 26a48c4cc2f1 ("gpio: altera-a10sr: Add A10 System Resource Chip GPIO support.") Cc: Signed-off-by: Axel Lin Tested by: Thor Thayer Reviewed by: Thor Thayer Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman

gpio: pl061: Move irq_chip definition inside struct pl061

2019-01-26T08:37:01Z

[ Upstream commit ed8dce4c6f726b7f3c6bf40859b92a9e32f189c1 ] Keeping the irq_chip definition static will make it shared with multiple giochips in the system. This practice is considered to be bad and now we will get the below warning from gpiolib core: "detected irqchip that is shared with multiple gpiochips: please fix the driver." Hence, move the irq_chip definition from static to `struct pl061` for using a unique irq_chip for each gpiochip. Signed-off-by: Manivannan Sadhasivam Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

gpio: mvebu: only fail on missing clk if pwm is actually to be used

2019-01-13T09:01:01Z

[ Upstream commit c8da642d41a6811c21177c9994aa7dc35be67d46 ] The gpio IP on Armada 370 at offset 0x18180 has neither a clk nor pwm registers. So there is no need for a clk as the pwm isn't used anyhow. So only check for the clk in the presence of the pwm registers. This fixes a failure to probe the gpio driver for the above mentioned gpio device. Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Uwe Kleine-König Reviewed-by: Gregory CLEMENT Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

gpiolib-acpi: Only defer request_irq for GpioInt ACPI event handlers

2018-12-29T12:39:09Z

commit e59f5e08ece1060073d92c66ded52e1f2c43b5bb upstream. Commit 78d3a92edbfb ("gpiolib-acpi: Register GpioInt ACPI event handlers from a late_initcall") deferred the entire acpi_gpiochip_request_interrupt call for each event resource. This means it also delays the gpiochip_request_own_desc(..., "ACPI:Event") call. This is a problem if some AML code reads the GPIO pin before we run the deferred acpi_gpiochip_request_interrupt, because in that case acpi_gpio_adr_space_handler() will already have called gpiochip_request_own_desc(..., "ACPI:OpRegion") causing the call from acpi_gpiochip_request_interrupt to fail with -EBUSY and we will fail to register an event handler. acpi_gpio_adr_space_handler is prepared for acpi_gpiochip_request_interrupt already having claimed the pin, but the other way around does not work. One example of a problem this causes, is the event handler for the OTG ID pin on a Prowise PT301 tablet not registering, keeping the port stuck in whatever mode it was in during boot and e.g. only allowing charging after a reboot. This commit fixes this by only deferring the request_irq call and the initial run of edge-triggered IRQs instead of deferring all of acpi_gpiochip_request_interrupt. Cc: stable@vger.kernel.org Fixes: 78d3a92edbfb ("gpiolib-acpi: Register GpioInt ACPI event ...") Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

gpio: max7301: fix driver for use with CONFIG_VMAP_STACK

2018-12-29T12:39:09Z

commit abf221d2f51b8ce7b9959a8953f880a8b0a1400d upstream. spi_read() and spi_write() require DMA-safe memory. When CONFIG_VMAP_STACK is selected, those functions cannot be used with buffers on stack. This patch replaces calls to spi_read() and spi_write() by spi_write_then_read() which doesn't require DMA-safe buffers. Fixes: 0c36ec314735 ("gpio: gpio driver for max7301 SPI GPIO expander") Cc: Signed-off-by: Christophe Leroy Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

gpio: mockup: fix indicated direction

2018-12-13T08:18:48Z

[ Upstream commit bff466bac59994cfcceabe4d0be5fdc1c20cd5b8 ] Commit 3edfb7bd76bd ("gpiolib: Show correct direction from the beginning") fixed an existing issue but broke libgpiod tests by changing the default direction of dummy lines to output. We don't break user-space so make gpio-mockup behave as before. Signed-off-by: Bartosz Golaszewski Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

gpio: don't free unallocated ida on gpiochip_add_data_with_key() error path

2018-12-01T08:42:50Z

commit a05a14049999598a3bb6fab12db6b768a0215522 upstream. The change corrects the error path in gpiochip_add_data_with_key() by avoiding to call ida_simple_remove(), if ida_simple_get() returns an error. Note that ida_simple_remove()/ida_free() throws a BUG(), if id argument is negative, it allows to easily check the correctness of the fix by fuzzing the return value from ida_simple_get(). Fixes: ff2b13592299 ("gpio: make the gpiochip a real device") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Vladimir Zapolskiy Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

gpio: brcmstb: release the bgpio lock during irq handlers

2018-11-21T08:24:17Z

commit 142c168e0e50164e67c9399c28dedd65a307cfe5 upstream. The basic memory-mapped GPIO controller lock must be released before calling the registered GPIO interrupt handlers to allow the interrupt handlers to access the hardware. Examples of why a GPIO interrupt handler might want to access the GPIO hardware include an interrupt that is configured to trigger on rising and falling edges that needs to read the current level of the input to know how to respond, or an interrupt that causes a change in a GPIO output in the same bank. If the lock is not released before enterring the handler the hardware accesses will deadlock when they attempt to grab the lock. Since the lock is only needed to protect the calculation of unmasked pending interrupts create a dedicated function to perform this and hide the complexity. Fixes: 19a7b6940b78 ("gpio: brcmstb: Add interrupt and wakeup source support") Signed-off-by: Doug Berger Reviewed-by: Florian Fainelli Acked-by: Gregory Fong Signed-off-by: Linus Walleij Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

gpio: mxs: Get rid of external API call

2018-11-10T15:48:34Z

[ Upstream commit 833eacc7b5913da9896bacd30db7d490aa777868 ] The MXS driver was calling back into the GPIO API from its irqchip. This is not very elegant, as we are a driver, let's just shortcut back into the gpio_chip .get() function instead. This is a tricky case since the .get() callback is not in this file, instead assigned by bgpio_init(). Calling the function direcly in the gpio_chip is however the lesser evil. Cc: Sascha Hauer Cc: Janusz Uzycki Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin