user/sven/linux.git/drivers/gpu/drm/imx, branch v4.9.46

drm/imx: imx-tve: Do not set the regulator voltage

2017-03-15T02:02:50Z

commit fc12bccda8b6f5c38139eceec9e369ed78091b2b upstream. Commit deb65870b5d9d ("drm/imx: imx-tve: check the value returned by regulator_set_voltage()") exposes the following probe issue: 63ff0000.tve supply dac not found, using dummy regulator imx-drm display-subsystem: failed to bind 63ff0000.tve (ops imx_tve_ops): -22 When the 'dac-supply' is not passed in the device tree a dummy regulator is used and setting its voltage is not allowed. To fix this issue, do not set the dac-supply voltage inside the driver and let its voltage be specified in the device tree. Print a warning if the the 'dac-supply' voltage has a value different from 2.75V. Fixes: deb65870b5d9d ("drm/imx: imx-tve: check the value returned by regulator_set_voltage()") Suggested-by: Lucas Stach Signed-off-by: Fabio Estevam Signed-off-by: Philipp Zabel Signed-off-by: Greg Kroah-Hartman

drm/imx: disable planes before DC

2016-11-09T09:35:50Z

If the DC clock is disabled before the attached IDMACs are properly stopped the IDMACs may hang the IPU or even the whole system. Make sure the IDMACs are in safe state by disabling the planes before removal of the DC clock. Also set the atomic parameter to false to stop calling the atomic_begin hook, which does nothing useful as we immediately afterwards turn off vblank interrupts and possibly send the pending vblank event. Fixes: 33f14235302f (drm/imx: atomic phase 1: Use transitional atomic CRTC and plane helpers) Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel

drm/imx: ipuv3-plane: disable local alpha for planes without alpha channel

2016-10-20T12:39:51Z

Without this patch, after enabling the overlay plane with an RGBA framebuffer, switching to a framebuffer without alpha channel would cause the plane to vanish, since the pixel local alpha is constant zero in that case. Disable local alpha again when setting an opaque framebuffer. Signed-off-by: Philipp Zabel

drm/imx: ipuv3-plane: make sure x/y offsets are even in case of chroma subsampling

2016-10-20T12:39:38Z

Odd x/y offsets are not allowed for horizontally/vertically chroma subsampled planar YUV formats. Signed-off-by: Philipp Zabel Acked-by: Liu Ying

drm/imx: ipuv3-plane: Access old u/vbo properly in ->atomic_check for YU12/YV12

2016-10-18T09:02:12Z

Before accessing the u/v offset(aka, u/vbo for IPUv3) of the old plane state's relevant fb, we should make sure the fb is in YU12 or YV12 pixel format(which are the two YUV pixel formats we support only), otherwise, we are likely to trigger BUG_ON() in drm_plane_state_to_u/vbo() since the fb's pixel format is probably not YU12 or YV12. Link: https://bugs.freedesktop.org/show_bug.cgi?id=98150 Fixes: c6c1f9bc798b ("drm/imx: Add active plane reconfiguration support") Cc: stable@vger.kernel.org # 4.8 Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel

drm/imx: drm_dev_alloc() returns error pointers

2016-10-18T09:02:11Z

We are checking for NULL here, when we should be checking for error pointers. Fixes: 54db5decce17 ("drm/imx: drop deprecated load/unload drm_driver ops") Signed-off-by: Dan Carpenter Reviewed-by: Lucas Stach Signed-off-by: Philipp Zabel

drm/imx: ipuv3-plane: Skip setting u/vbo only when we don't need modeset

2016-10-18T09:02:11Z

We added active plane reconfiguration support by forcing a full modeset operation. So, looking at old_plane_state->fb to determine whether we need to set u/v offset(aka, u/vbo for IPUv3) in ipu_plane_atomic_set_base() or not is no more correct. Instead, we should do that only when we don't need modeset. Fixes: c6c1f9bc798b ("drm/imx: Add active plane reconfiguration support") Cc: stable@vger.kernel.org # 4.8 Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel

drm/imx: ipuv3-plane: Switch EBA buffer only when we don't need modeset

2016-10-18T09:02:10Z

We added active plane reconfiguration support by forcing a full modeset operation. So, looking at old_plane_state->fb to determine whether we need to switch EBA buffer(for hardware double buffering) in ipu_plane_atomic_set_base() or not is no more correct. Instead, we should do that only when we don't need modeset, otherwise, we initialize the two EBA buffers with the buffer address. Fixes: c6c1f9bc798b ("drm/imx: Add active plane reconfiguration support") Cc: stable@vger.kernel.org # 4.8 Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel

drm/imx: hide an unused label

2016-10-17T06:21:53Z

The imx_drm_bind function causes a warning in linux-next when CONFIG_DRM_FBDEV_EMULATION is not set: drivers/gpu/drm/imx/imx-drm-core.c: In function 'imx_drm_bind': drivers/gpu/drm/imx/imx-drm-core.c:441:1: error: label 'err_unbind' defined but not used [-Werror=unused-label] I don't understand why the warning only showed up now, as the code has not been modified recently, but there is an obvious fix in adding another #if for the symbol. Signed-off-by: Arnd Bergmann Fixes: c1ff5a7aa3c3 ("drm/imx: Remove local fbdev emulation Kconfig option") Signed-off-by: Philipp Zabel

Merge tag 'v4.8-rc8' into drm-next

2016-09-28T02:08:49Z

Linux 4.8-rc8 There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge it now to avoid troubles. * tag 'v4.8-rc8': (1442 commits) Linux 4.8-rc8 fault_in_multipages_readable() throws set-but-unused error mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing radix tree: fix sibling entry handling in radix_tree_descend() radix tree test suite: Test radix_tree_replace_slot() for multiorder entries fix memory leaks in tracing_buffers_splice_read() tracing: Move mutex to protect against resetting of seq data MIPS: Fix delay slot emulation count in debugfs MIPS: SMP: Fix possibility of deadlock when bringing CPUs online mm: delete unnecessary and unsafe init_tlb_ubc() huge tmpfs: fix Committed_AS leak shmem: fix tmpfs to handle the huge= option properly blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx MIPS: Fix pre-r6 emulation FPU initialisation arm64: kgdb: handle read-only text / modules arm64: Call numa_store_cpu_info() earlier. locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text nvme-rdma: only clear queue flags after successful connect i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended perf/core: Limit matching exclusive events to one PMU ...