user/sven/linux.git/drivers/gpu/drm/msm, branch v5.10.36

drm/msm/mdp5: Do not multiply vclk line count by 100

2021-05-11T12:47:29Z

[ Upstream commit 377569f82ea8228c421cef4da33e056a900b58ca ] Neither vtotal nor drm_mode_vrefresh contain a value that is premultiplied by 100 making the x100 variable name incorrect and resulting in vclks_line to become 100 times larger than it is supposed to be. The hardware counts 100 clockticks too many before tearcheck, leading to severe panel issues on at least the Sony Xperia lineup. This is likely an artifact from the original MDSS DSI panel driver where the calculation [1] corrected for a premultiplied reference framerate by 100 [2]. It does not appear that the above values were ever premultiplied in the history of the DRM MDP5 driver. With this change applied the value written to the SYNC_CONFIG_VSYNC register is now identical to downstream kernels. [1]: https://source.codeaurora.org/quic/la/kernel/msm-3.18/tree/drivers/video/msm/mdss/mdss_mdp_intf_cmd.c?h=LA.UM.8.6.c26-02400-89xx.0#n288 [2]: https://source.codeaurora.org/quic/la/kernel/msm-3.18/tree/drivers/video/msm/mdss/mdss_dsi_panel.c?h=LA.UM.8.6.c26-02400-89xx.0#n1648 Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Marijn Suijten Link: https://lore.kernel.org/r/20210406214726.131534-3-marijn.suijten@somainline.org Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal

2021-05-11T12:47:29Z

[ Upstream commit 2ad52bdb220de5ab348098e3482b01235d15a842 ] Leaving this at a close-to-maximum register value 0xFFF0 means it takes very long for the MDSS to generate a software vsync interrupt when the hardware TE interrupt doesn't arrive. Configuring this to double the vtotal (like some downstream kernels) leads to a frame to take at most twice before the vsync signal, until hardware TE comes up. In this case the hardware interrupt responsible for providing this signal - "disp-te" gpio - is not hooked up to the mdp5 vsync/pp logic at all. This solves severe panel update issues observed on at least the Xperia Loire and Tone series, until said gpio is properly hooked up to an irq. Suggested-by: AngeloGioacchino Del Regno Signed-off-by: Marijn Suijten Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20210406214726.131534-2-marijn.suijten@somainline.org Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: Fix incorrect NULL check kbot warnings in DP driver

2021-05-11T12:47:28Z

[ Upstream commit 7d649cfe0314aad2ba18042885ab9de2f13ad809 ] Fix an incorrect NULL check reported by kbot in the MSM DP driver smatch warnings: drivers/gpu/drm/msm/dp/dp_hpd.c:37 dp_hpd_connect() error: we previously assumed 'hpd_priv->dp_cb' could be null (see line 37) Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Abhinav Kumar Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1614971839-2686-2-git-send-email-abhinavk@codeaurora.org Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm: Fix a5xx/a6xx timestamps

2021-04-21T11:00:52Z

[ Upstream commit 9fbd3088351b92e8c2cef6e37a39decb12a8d5bb ] They were reading a counter that was configured to ALWAYS_COUNT (ie. cycles that the GPU is doing something) rather than ALWAYS_ON. This isn't the thing that userspace is looking for. Signed-off-by: Rob Clark Acked-by: Jordan Crouse Message-Id: <20210325012358.1759770-2-robdclark@gmail.com> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm: Set drvdata to NULL when msm_drm_init() fails

2021-04-14T06:42:09Z

[ Upstream commit 5620b135aea49a8f41c86aaecfcb1598a7774121 ] We should set the platform device's driver data to NULL here so that code doesn't assume the struct drm_device pointer is valid when it could have been destroyed. The lifetime of this pointer is managed by a kref but when msm_drm_init() fails we call drm_dev_put() on the pointer which will free the pointer's memory. This driver uses the component model, so there's sort of two "probes" in this file, one for the platform device i.e. msm_pdev_probe() and one for the component i.e. msm_drm_bind(). The msm_drm_bind() code is using the platform device's driver data to store struct drm_device so the two functions are intertwined. This relationship becomes a problem for msm_pdev_shutdown() when it tests the NULL-ness of the pointer to see if it should call drm_atomic_helper_shutdown(). The NULL test is a proxy check for if the pointer has been freed by kref_put(). If the drm_device has been destroyed, then we shouldn't call the shutdown helper, and we know that is the case if msm_drm_init() failed, therefore set the driver data to NULL so that this pointer liveness is tracked properly. Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver") Cc: Dmitry Baryshkov Cc: Fabio Estevam Cc: Krishna Manikandan Signed-off-by: Stephen Boyd Message-Id: <20210325212822.3663144-1-swboyd@chromium.org> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume

2021-04-10T11:36:09Z

[ Upstream commit 627dc55c273dab308303a5217bd3e767d7083ddb ] DPU runtime resume will request for a min vote on the AXI bus as it is a necessary step before turning ON the AXI clock. The change does below 1) Move the icc path set before requesting runtime get_sync. 2) remove the dependency of hw catalog for min ib vote as it is initialized at a later point. Signed-off-by: Kalyan Thota Tested-by: Matthias Kaehlcke Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm: Ratelimit invalid-fence message

2021-04-10T11:36:08Z

[ Upstream commit 7ad48d27a2846bfda29214fb454d001c3e02b9e7 ] We have seen a couple cases where low memory situations cause something bad to happen, followed by a flood of these messages obscuring the root cause. Lets ratelimit the dmesg spam so that next time it happens we don't lose the kernel traces leading up to this. Signed-off-by: Rob Clark Reviewed-by: Douglas Anderson Signed-off-by: Sasha Levin

drm/msm/adreno: a5xx_power: Don't apply A540 lm_setup to other GPUs

2021-04-10T11:36:08Z

[ Upstream commit 4a9d36b0610aa7034340e976652e5b43320dd7c5 ] While passing the A530-specific lm_setup func to A530 and A540 to !A530 was fine back when only these two were supported, it certainly is not a good idea to send A540 specifics to smaller GPUs like A508 and friends. Signed-off-by: Konrad Dybcio Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi_pll_7nm: Fix variable usage for pll_lockdet_rate

2021-04-10T11:36:08Z

[ Upstream commit 9daaf31307856defb1070685418ce5a484ecda3a ] The PLL_LOCKDET_RATE_1 was being programmed with a hardcoded value directly, but the same value was also being specified in the dsi_pll_regs struct pll_lockdet_rate variable: let's use it! Based on 362cadf34b9f ("drm/msm/dsi_pll_10nm: Fix variable usage for pll_lockdet_rate") Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm: Fix suspend/resume on i.MX5

2021-03-30T12:32:03Z

[ Upstream commit a9748134ea4aad989e52a6a91479e0acfd306e5b ] When putting iMX5 into suspend, the following flow is observed: [ 70.023427] [] (msm_atomic_commit_tail) from [] (commit_tail+0x9c/0x18c) [ 70.031890] [] (commit_tail) from [] (drm_atomic_helper_commit+0x1a0/0x1d4) [ 70.040627] [] (drm_atomic_helper_commit) from [] (drm_atomic_helper_disable_all+0x1c4/0x1d4) [ 70.050913] [] (drm_atomic_helper_disable_all) from [] (drm_atomic_helper_suspend+0xb8/0x170) [ 70.061198] [] (drm_atomic_helper_suspend) from [] (drm_mode_config_helper_suspend+0x24/0x58) In the i.MX5 case, priv->kms is not populated (as i.MX5 does not use any of the Qualcomm display controllers), causing a NULL pointer dereference in msm_atomic_commit_tail(): [ 24.268964] 8<--- cut here --- [ 24.274602] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 24.283434] pgd = (ptrval) [ 24.286387] [00000000] *pgd=ca212831 [ 24.290788] Internal error: Oops: 17 [#1] SMP ARM [ 24.295609] Modules linked in: [ 24.298777] CPU: 0 PID: 197 Comm: init Not tainted 5.11.0-rc2-next-20210111 #333 [ 24.306276] Hardware name: Freescale i.MX53 (Device Tree Support) [ 24.312442] PC is at msm_atomic_commit_tail+0x54/0xb9c [ 24.317743] LR is at commit_tail+0xa4/0x1b0 Fix the problem by calling drm_mode_config_helper_suspend/resume() only when priv->kms is available. Fixes: ca8199f13498 ("drm/msm/dpu: ensure device suspend happens during PM sleep") Signed-off-by: Fabio Estevam Signed-off-by: Rob Clark Signed-off-by: Sasha Levin