user/sven/linux.git/drivers/gpu/drm/panel, branch v5.4.249

drm/panel: otm8009a: Set backlight parent to panel device

2023-05-17T09:36:02Z

commit ab4f869fba6119997f7630d600049762a2b014fa upstream. This is the logical place to put the backlight device, and it also fixes a kernel crash if the MIPI host is removed. Previously the backlight device would be unregistered twice when this happened - once as a child of the MIPI host through `mipi_dsi_host_unregister`, and once when the panel device is destroyed. Fixes: 12a6cbd4f3f1 ("drm/panel: otm8009a: Use new backlight API") Signed-off-by: James Cowgill Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230412173450.199592-1-james.cowgill@blaize.com Signed-off-by: Greg Kroah-Hartman

drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure

2023-01-18T10:41:01Z

[ Upstream commit c62102165dd79284d42383d2f7ed17301bd8e629 ] In case mipi_dsi_attach() fails, call drm_panel_remove() to avoid memory leak. Fixes: 849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver") Signed-off-by: Marek Vasut Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20221014231106.468063-1-marex@denx.de Signed-off-by: Sasha Levin

drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare

2022-04-27T11:50:49Z

[ Upstream commit 5f18c0782b99e26121efa93d20b76c19e17aa1dd ] The panel has a prepare call which is before video starts, and an enable call which is after. The Toshiba bridge should be configured before video, so move the relevant power and initialisation calls to prepare. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Dave Stevenson Signed-off-by: Stefan Wahren Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-3-stefan.wahren@i2se.com Signed-off-by: Sasha Levin

drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised

2022-04-27T11:50:49Z

[ Upstream commit f92055ae0acb035891e988ce345d6b81a0316423 ] If a call to rpi_touchscreen_i2c_write from rpi_touchscreen_probe fails before mipi_dsi_device_register_full is called, then in trying to log the error message if uses ts->dsi->dev when it is still NULL. Use ts->i2c->dev instead, which is initialised earlier in probe. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Dave Stevenson Signed-off-by: Stefan Wahren Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-2-stefan.wahren@i2se.com Signed-off-by: Sasha Levin

drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings

2022-03-23T08:12:07Z

[ Upstream commit fc1b6ef7bfb3d1d4df868b1c3e0480cacda6cd81 ] The Innolux G070Y2-L01 supports two modes of operation: 1) FRC=Low/NC ... MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ... BPP=6 2) FRC=High ..... MEDIA_BUS_FMT_RGB888_1X7X4_SPWG ... BPP=8 Currently the panel description mixes both, BPP from 1) and bus format from 2), which triggers a warning at panel-simple.c:615. Pick the later, set bpp=8, fix the warning. Fixes: a5d2ade627dca ("drm/panel: simple: Add support for Innolux G070Y2-L01") Signed-off-by: Marek Vasut Cc: Christoph Fritz Cc: Laurent Pinchart Cc: Maxime Ripard Cc: Sam Ravnborg Cc: Thomas Zimmermann Reviewed-by: Laurent Pinchart Link: https://patchwork.freedesktop.org/patch/msgid/20220220040718.532866-1-marex@denx.de Signed-off-by: Maarten Lankhorst Signed-off-by: Sasha Levin

drm/panel: innolux-p079zca: Delete panel on attach() failure

2022-01-27T08:19:29Z

[ Upstream commit 32a267e9c057e1636e7afdd20599aa5741a73079 ] If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't ready), we leave a dangling drm_panel reference to freed memory. Clean that up on failure. This problem exists since the driver's introduction, but is especially relevant after refactored for dual-DSI variants. Fixes: 14c8f2e9f8ea ("drm/panel: add Innolux P079ZCA panel driver") Fixes: 7ad4e4636c54 ("drm/panel: p079zca: Refactor panel driver to support multiple panels") Signed-off-by: Brian Norris Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.2.I9023cf8811a3abf4964ed84eb681721d8bb489d6@changeid Signed-off-by: Sasha Levin

drm/panel: kingdisplay-kd097d04: Delete panel on attach() failure

2022-01-27T08:19:29Z

[ Upstream commit 5f31dbeae8a88f31c3eb4eb526ab4807c40da241 ] If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't ready), we leave a dangling drm_panel reference to freed memory. Clean that up on failure. Fixes: 2a994cbed6b2 ("drm/panel: Add Kingdisplay KD097D04 panel driver") Signed-off-by: Brian Norris Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.1.Icb4d9dbc1817f4e826361a4f1cea7461541668f0@changeid Signed-off-by: Sasha Levin

drm/panel: olimex-lcd-olinuxino: select CRC32

2021-10-20T09:40:17Z

commit a14bc107edd0c108bda2245e50daa22f91c95d20 upstream. Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.o: in function `lcd_olinuxino_probe': panel-olimex-lcd-olinuxino.c:(.text+0x303): undefined reference to `crc32_le' Fixes: 17fd7a9d324fd ("drm/panel: Add support for Olimex LCD-OLinuXino panel") Cc: Arnd Bergmann Signed-off-by: Vegard Nossum Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20211012115242.10325-1-vegard.nossum@oracle.com Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/panel: raspberrypi-touchscreen: Prevent double-free

2021-07-28T11:30:58Z

[ Upstream commit 7bbcb919e32d776ca8ddce08abb391ab92eef6a9 ] The mipi_dsi_device allocated by mipi_dsi_device_register_full() is already free'd on release. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Maxime Ripard Reviewed-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20210720134525.563936-9-maxime@cerno.tech Signed-off-by: Sasha Levin

drm: panel: Fix bpc for OrtusTech COM43H4M85ULC panel

2020-10-29T08:57:37Z

[ Upstream commit 3b8095169982ff4ec2a1b4be61b7224bbef23b48 ] The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel. Commit f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") has fixed the bus formats, but forgot to address the bpc value. Set it to 6. Fixes: f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") Signed-off-by: Laurent Pinchart Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200824003254.21904-1-laurent.pinchart@ideasonboard.com Signed-off-by: Sasha Levin