user/sven/linux.git/drivers/gpu/drm/rockchip, branch v5.16.4

drm/rockchip: dsi: Disable PLL clock on bind error

2022-01-27T11:01:25Z

[ Upstream commit 5a614570172e1c9f59035d259dd735acd4f1c01b ] Fix some error handling here noticed in review of other changes. Fixes: 2d4f7bdafd70 ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver") Signed-off-by: Brian Norris Reported-by: Chen-Yu Tsai Reviewed-by: Chen-Yu Tsai Tested-by: Nícolas F. R. A. Prado Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.4.I8bb7a91ecc411d56bc155763faa15f289d7fc074@changeid Signed-off-by: Sasha Levin

drm/rockchip: dsi: Fix unbalanced clock on probe error

2022-01-27T11:01:25Z

[ Upstream commit 251888398753924059f3bb247a44153a2853137f ] Our probe() function never enabled this clock, so we shouldn't disable it if we fail to probe the bridge. Noted by inspection. Fixes: 2d4f7bdafd70 ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver") Signed-off-by: Brian Norris Reviewed-by: Chen-Yu Tsai Tested-by: Nícolas F. R. A. Prado Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.3.Ie8ceefb51ab6065a1151869b6fcda41a467d4d2c@changeid Signed-off-by: Sasha Levin

drm/rockchip: dsi: Reconfigure hardware on resume()

2022-01-27T11:01:24Z

commit e584cdc1549932f87a2707b56bc588cfac5d89e0 upstream. Since commit 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()"), we perform most HW configuration in the bind() function. This configuration may be lost on suspend/resume, so we need to call it again. That may lead to errors like this after system suspend/resume: dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110 Tested on Acer Chromebook Tab 10 (RK3399 Gru-Scarlet). Note that early mailing list versions of this driver borrowed Rockchip's downstream/BSP solution, to do HW configuration in mode_set() (which *is* called at the appropriate pre-enable() times), but that was discarded along the way. I've avoided that still, because mode_set() documentation doesn't suggest this kind of purpose as far as I can tell. Fixes: 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()") Cc: Signed-off-by: Brian Norris Reviewed-by: Chen-Yu Tsai Tested-by: Nícolas F. R. A. Prado Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.2.I4e9d93aadb00b1ffc7d506e3186a25492bf0b732@changeid Signed-off-by: Greg Kroah-Hartman

drm/rockchip: dsi: Hold pm-runtime across bind/unbind

2022-01-27T11:01:24Z

commit 514db871922f103886ad4d221cf406b4fcc5e74a upstream. In commit 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()"), we moved most HW configuration to bind(), but we didn't move the runtime PM management. Therefore, depending on initial boot state, runtime-PM workqueue delays, and other timing factors, we may disable our power domain in between the hardware configuration (bind()) and when we enable the display. This can cause us to lose hardware state and fail to configure our display. For example: dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO panel-innolux-p079zca ff960000.mipi.0: failed to write command 0 or: dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110 We should match the runtime PM to the lifetime of the bind()/unbind() cycle. Tested on Acer Chrometab 10 (RK3399 Gru-Scarlet), with panel drivers built either as modules or built-in. Side notes: it seems one is more likely to see this problem when the panel driver is built into the kernel. I've also seen this problem bisect down to commits that simply changed Kconfig dependencies, because it changed the order in which driver init functions were compiled into the kernel, and therefore the ordering and timing of built-in device probe. Fixes: 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()") Link: https://lore.kernel.org/linux-rockchip/9aedfb528600ecf871885f7293ca4207c84d16c1.camel@gmail.com/ Reported-by: Cc: Signed-off-by: Brian Norris Tested-by: Nícolas F. R. A. Prado Reviewed-by: Chen-Yu Tsai Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.1.Ic2904d37f30013a7f3d8476203ad3733c186827e@changeid Signed-off-by: Greg Kroah-Hartman

BackMerge tag 'v5.15-rc7' into drm-next

2021-10-28T04:59:38Z

The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in. Signed-off-by: Dave Airlie

drm/rockchip: Update crtc fixup to account for fractional clk change

2021-10-06T09:05:45Z

After commit 928f9e268611 ("clk: fractional-divider: Hide clk_fractional_divider_ops from wide audience") was merged it appears that the DSI panel on my Odroid Go Advance stopped working. Upon closer examination of the problem, it looks like it was the fixup in the rockchip_drm_vop.c file was causing the issue. The changes made to the clk driver appear to change some assumptions made in the fixup. After debugging the working 5.14 kernel and the no-longer working 5.15 kernel, it looks like this was broken all along but still worked, whereas after the fractional clock change it stopped working despite the issue (it went from sort-of broken to very broken). In the 5.14 kernel the dclk_vopb_frac was being requested to be set to 17000999 on my board. The clock driver was taking the value of the parent clock and attempting to divide the requested value from it (17000000/17000999 = 0), then subtracting 1 from it (making it -1), and running it through fls_long to get 64. It would then subtract the value of fd->mwidth from it to get 48, and then bit shift 17000999 to the left by 48, coming up with a very large number of 7649082492112076800. This resulted in a numerator of 65535 and a denominator of 1 from the clk driver. The driver seemingly would try again and get a correct 1:1 value later, and then move on. Output from my 5.14 kernel (with some printfs for good measure): [ 2.830066] rockchip-drm display-subsystem: bound ff460000.vop (ops vop_component_ops) [ 2.839431] rockchip-drm display-subsystem: bound ff450000.dsi (ops dw_mipi_dsi_rockchip_ops) [ 2.855980] Clock is dclk_vopb_frac [ 2.856004] Scale 64, Rate 7649082492112076800, Oldrate 17000999, Parent Rate 17000000, Best Numerator 65535, Best Denominator 1, fd->mwidth 16 [ 2.903529] Clock is dclk_vopb_frac [ 2.903556] Scale 0, Rate 17000000, Oldrate 17000000, Parent Rate 17000000, Best Numerator 1, Best Denominator 1, fd->mwidth 16 [ 2.903579] Clock is dclk_vopb_frac [ 2.903583] Scale 0, Rate 17000000, Oldrate 17000000, Parent Rate 17000000, Best Numerator 1, Best Denominator 1, fd->mwidth 16 Contrast this with 5.15 after the clk change where the rate of 17000999 was getting passed and resulted in numerators/denomiators of 17001/ 17000. Output from my 5.15 kernel (with some printfs added for good measure): [ 2.817571] rockchip-drm display-subsystem: bound ff460000.vop (ops vop_component_ops) [ 2.826975] rockchip-drm display-subsystem: bound ff450000.dsi (ops dw_mipi_dsi_rockchip_ops) [ 2.843430] Rate 17000999, Parent Rate 17000000, Best Numerator 17018, Best Denominator 17017 [ 2.891073] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 [ 2.891269] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 [ 2.891281] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 I have tested the change extensively on my Odroid Go Advance (Rockchip RK3326) and it appears to work well. However, this change will affect all Rockchip SoCs that use this driver so I believe further testing is warranted. Please note that without this change I can confirm at least all PX30s with DSI panels will stop working with the 5.15 kernel. Upon advice from Doug Anderson it was decided that we would first check if the clock rate can be set exactly as requested, and only if it could not would we then add 999 to it and attempt the process again. This way we can preserve the behavior for clocks that still need it while resolving the specific issue for the PX30 and DSI panels (since it is using a fractional clock). Changes since v2: - Moved fixes to correct location. Changes since v1: - Made the addition of 999 conditional based on whether the clock subsystem can set the actual clock rate as requested. - Updated the notes in the fixup routine to reflect this new behavior. - Added reference to original commit, as this has technically been broken since then however only now is it an issue due to the clock changes. Fixes: 4e7cf74fa3b2 ("clk: fractional-divider: Export approximation algorithm to the CCF users") Signed-off-by: Chris Morgan Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20210916202907.18394-1-macroalpha82@gmail.com Signed-off-by: Maarten Lankhorst

Merge tag 'drm-misc-next-2021-09-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2021-09-24T03:49:08Z

drm-misc-next for 5.15: UAPI Changes: Cross-subsystem Changes: Core Changes: Driver Changes: - Conversions to dev_err_probe() helper - rockchip: Various build improvements, Use DRM_BRIDGE_ATTACH_NO_CONNECTOR for LVDS and RGB - panel: New panel-edp driver Signed-off-by: Dave Airlie From: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210923074522.zaja7mzxeimxf6g3@gilmour

Merge tag 'drm-misc-next-2021-09-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2021-09-22T05:30:40Z

drm-misc-next for $kernel-version: UAPI Changes: Cross-subsystem Changes: - dma-buf: Avoid a warning with some allocations, Remove DMA_FENCE_TRACE macros Core Changes: - bridge: New helper to git rid of panels in drivers - fence: Improve dma_fence_add_callback documentation, Improve dma_fence_ops->wait documentation - ioctl: Unexport drm_ioctl_permit - lease: Documentation improvements - fourcc: Add new macro to determine the modifier vendor - quirks: Add the Steam Deck, Chuwi HiBook, Chuwi Hi10 Pro, Samsung Galaxy Book 10.6, KD Kurio Smart C15200 2-in-1, Lenovo Ideapad D330 - resv: Improve the documentation - shmem-helpers: Allocate WC pages on x86, Switch to vmf_insert_pfn - sched: Fix for a timer being canceled too soon, Avoid null pointer derefence if the fence is null in drm_sched_fence_free, Convert drivers to rely on its dependency tracking - ttm: Switch to kerneldoc, new helper to clear all DMA mappings, pool shrinker optitimization, Remove ttm_tt_destroy_common, Fix for unbinding on multiple drivers Driver Changes: - bochs: New PCI IDs - msm: Fence ordering impromevemnts - stm: Add layer alpha support, zpos - v3d: Fix for a Vulkan CTS failure - vc4: Conversion to the new bridge helpers - vgem: Use shmem helpers - virtio: Support mapping exported vram - zte: Remove obsolete driver - bridge: Probe improvements for it66121, enable DSI EOTP for anx7625, errors propagation improvements for anx7625 - panels: 60fps mode for otm8009a, New driver for Samsung S6D27A1 Signed-off-by: Dave Airlie # gpg: Signature made Thu 16 Sep 2021 17:30:50 AEST # gpg: using EDDSA key 5C1337A45ECA9AEB89060E9EE3EF0D6F671851C5 # gpg: Can't check signature: No public key From: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210916073132.ptbbmjetm7v3ufq3@gilmour

drm/rockchip: remove of_match_ptr() from analogix dp driver

2021-09-21T09:53:42Z

Kernel test robot throws below warning when CONFIG_OF is not set. >> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c:457:34: warning: unused variable 'rockchip_dp_dt_ids' [-Wunused-const-variable] static const struct of_device_id rockchip_dp_dt_ids[] = { Fixed it by removing of_match_ptr(). Reported-by: kernel test robot Signed-off-by: Souptick Joarder Cc: Robin Murphy Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20210607184836.3502-1-jrdr.linux@gmail.com

drm/rockchip: remove of_match_ptr() from vop_driver_dt_match

2021-09-21T09:53:03Z

kernel test robot throws warning when CONFIG_OF not set. >> drivers/gpu/drm/rockchip/rockchip_vop_reg.c:1038:34: warning: unused variable 'vop_driver_dt_match' [-Wunused-const-variable] static const struct of_device_id vop_driver_dt_match[] = { Fixed it by removing of_match_ptr(). Reported-by: kernel test robot Signed-off-by: Souptick Joarder Cc: Robin Murphy Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20210607190800.3992-1-jrdr.linux@gmail.com