user/sven/linux.git/drivers/gpu/drm, branch v4.14.161

drm/amdgpu: fix potential double drop fence reference

2019-12-31T11:37:30Z

[ Upstream commit 946ab8db6953535a3a88c957db8328beacdfed9d ] The object fence is not set to NULL after its reference is dropped. As a result, its reference may be dropped again if error occurs after that, which may lead to a use after free bug. To avoid the issue, fence is explicitly set to NULL after dropping its reference. Acked-by: Christian König Signed-off-by: Pan Bian Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/gma500: fix memory disclosures due to uninitialized bytes

2019-12-31T11:37:13Z

[ Upstream commit ec3b7b6eb8c90b52f61adff11b6db7a8db34de19 ] "clock" may be copied to "best_clock". Initializing best_clock is not sufficient. The fix initializes clock as well to avoid memory disclosures and informaiton leaks. Signed-off-by: Kangjie Lu Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20191018044150.1899-1-kjlu@umn.edu Signed-off-by: Sasha Levin

drm/bridge: dw-hdmi: Restore audio when setting a mode

2019-12-31T11:37:08Z

[ Upstream commit fadfee3f9d8f114435a8a3e9f83a227600d89de7 ] When setting a new display mode, dw_hdmi_setup() calls dw_hdmi_enable_video_path(), which disables all hdmi clocks, including the audio clock. We should only (re-)enable the audio clock if audio was already enabled when setting the new mode. Without this patch, on RK3288, there will be HDMI audio on some monitors if i2s was played to headphone when the monitor was plugged. ACER H277HU and ASUS PB278 are two of the monitors showing this issue. Signed-off-by: Cheng-Yi Chiang Signed-off-by: Daniel Kurtz Signed-off-by: Yakir Yang Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20191008102145.55134-1-cychiang@chromium.org Signed-off-by: Sasha Levin

drm/bridge: dw-hdmi: Refuse DDC/CI transfers on the internal I2C controller

2019-12-31T11:37:00Z

[ Upstream commit bee447e224b2645911c5d06e35dc90d8433fcef6 ] The DDC/CI protocol involves sending a multi-byte request to the display via I2C, which is typically followed by a multi-byte response. The internal I2C controller only allows single byte reads/writes or reads of 8 sequential bytes, hence DDC/CI is not supported when the internal I2C controller is used. The I2C transfers complete without errors, however the data in the response is garbage. Abort transfers to/from slave address 0x37 (DDC) with -EOPNOTSUPP, to make it evident that the communication is failing. Signed-off-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson Reviewed-by: Sean Paul Acked-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20191002124354.v2.1.I709dfec496f5f0b44a7b61dcd4937924da8d8382@changeid Signed-off-by: Sasha Levin

drm/bridge: analogix-anx78xx: silence -EPROBE_DEFER warnings

2019-12-31T11:36:47Z

[ Upstream commit 2708e876272d89bbbff811d12834adbeef85f022 ] Silence two warning messages that occur due to -EPROBE_DEFER errors to help cleanup the system boot log. Signed-off-by: Brian Masney Reviewed-by: Linus Walleij Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-4-masneyb@onstation.org Signed-off-by: Sasha Levin

drm/radeon: fix r1xx/r2xx register checker for POT textures

2019-12-21T09:47:53Z

commit 008037d4d972c9c47b273e40e52ae34f9d9e33e7 upstream. Shift and mask were reversed. Noticed by chance. Tested-by: Meelis Roos Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/i810: Prevent underflow in ioctl

2019-12-17T19:38:51Z

commit 4f69851fbaa26b155330be35ce8ac393e93e7442 upstream. The "used" variables here come from the user in the ioctl and it can be negative. It could result in an out of bounds write. Signed-off-by: Dan Carpenter Reviewed-by: Chris Wilson Signed-off-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20191004102251.GC823@mwanda Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/i915/userptr: Try to acquire the page lock around set_page_dirty()

2019-12-01T08:13:15Z

commit 2d691aeca4aecbb8d0414a777a46981a8e142b05 upstream. set_page_dirty says: For pages with a mapping this should be done under the page lock for the benefit of asynchronous memory errors who prefer a consistent dirty state. This rule can be broken in some special cases, but should be better not to. Under those rules, it is only safe for us to use the plain set_page_dirty calls for shmemfs/anonymous memory. Userptr may be used with real mappings and so needs to use the locked version (set_page_dirty_lock). However, following a try_to_unmap() we may want to remove the userptr and so call put_pages(). However, try_to_unmap() acquires the page lock and so we must avoid recursively locking the pages ourselves -- which means that we cannot safely acquire the lock around set_page_dirty(). Since we can't be sure of the lock, we have to risk skip dirtying the page, or else risk calling set_page_dirty() without a lock and so risk fs corruption. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012 Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl") References: cb6d7c7dc7ff ("drm/i915/userptr: Acquire the page lock around set_page_dirty()") References: 505a8ec7e11a ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"") References: 6dcc693bc57f ("ext4: warn when page is dirtied without buffers") Signed-off-by: Chris Wilson Cc: Lionel Landwerlin Cc: Tvrtko Ursulin Cc: Joonas Lahtinen Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk (cherry picked from commit 0d4bbe3d407f79438dc4f87943db21f7134cfc65) Signed-off-by: Joonas Lahtinen (cherry picked from commit cee7fb437edcdb2f9f8affa959e274997f5dca4d) Signed-off-by: Rodrigo Vivi Signed-off-by: Greg Kroah-Hartman

drm/i915/cmdparser: Fix jump whitelist clearing

2019-11-12T18:18:57Z

commit ea0b163b13ffc52818c079adb00d55e227a6da6f upstream. When a jump_whitelist bitmap is reused, it needs to be cleared. Currently this is done with memset() and the size calculation assumes bitmaps are made of 32-bit words, not longs. So on 64-bit architectures, only the first half of the bitmap is cleared. If some whitelist bits are carried over between successive batches submitted on the same context, this will presumably allow embedding the rogue instructions that we're trying to reject. Use bitmap_zero() instead, which gets the calculation right. Fixes: f8c08d8faee5 ("drm/i915/cmdparser: Add support for backward jumps") Signed-off-by: Ben Hutchings Signed-off-by: Jon Bloomfield Signed-off-by: Greg Kroah-Hartman

drm/i915/gen8+: Add RC6 CTX corruption WA

2019-11-12T18:18:57Z

commit 7e34f4e4aad3fd34c02b294a3cf2321adf5b4438 upstream. In some circumstances the RC6 context can get corrupted. We can detect this and take the required action, that is disable RC6 and runtime PM. The HW recovers from the corrupted state after a system suspend/resume cycle, so detect the recovery and re-enable RC6 and runtime PM. v2: rebase (Mika) v3: - Move intel_suspend_gt_powersave() to the end of the GEM suspend sequence. - Add commit message. v4: - Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API change. v5: - Rebased on latest upstream gt_pm refactoring. Signed-off-by: Imre Deak Signed-off-by: Mika Kuoppala Signed-off-by: Greg Kroah-Hartman