user/sven/linux.git/drivers/gpu/drm, branch v4.19.7

drm/amdgpu: fix bug with IH ring setup

2018-12-01T08:37:33Z

[ Upstream commit c837243ff4017f493c7d6f4ab57278d812a86859 ] The bug limits the IH ring wptr address to 40bit. When the system memory is bigger than 1TB, the bus address is more than 40bit, this causes the interrupt cannot be handled and cleared correctly. Reviewed-by: Christian König Signed-off-by: Philip Yang Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/ast: Remove existing framebuffers before loading driver

2018-12-01T08:37:29Z

commit 5478ad10e7850ce3d8b7056db05ddfa3c9ddad9a upstream. If vesafb attaches to the AST device, it configures the framebuffer memory for uncached access by default. When ast.ko later tries to attach itself to the device, it wants to use write-combining on the framebuffer memory, but vesefb's existing configuration for uncached access takes precedence. This results in reduced performance. Removing the framebuffer's configuration before loding the AST driver fixes the problem. Other DRM drivers already contain equivalent code. Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1112963 Signed-off-by: Thomas Zimmermann Cc: Tested-by: Y.C. Chen Reviewed-by: Jean Delvare Tested-by: Jean Delvare Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/ast: fixed cursor may disappear sometimes

2018-12-01T08:37:29Z

commit 7989b9ee8bafe5cc625381dd0c3c4586de27ca26 upstream. Signed-off-by: Y.C. Chen Cc: Reviewed-by: Dave Airlie Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/ast: change resolution may cause screen blurred

2018-12-01T08:37:28Z

commit 1a37bd823891568f8721989aed0615835632d81a upstream. The value of pitches is not correct while calling mode_set. The issue we found so far on following system: - Debian8 with XFCE Desktop - Ubuntu with KDE Desktop - SUSE15 with KDE Desktop Signed-off-by: Y.C. Chen Cc: Tested-by: Jean Delvare Reviewed-by: Jean Delvare Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/i915: Disable LP3 watermarks on all SNB machines

2018-12-01T08:37:28Z

commit 21556350ade3cb5d7afecc8b3544e56431d21695 upstream. I have a Thinkpad X220 Tablet in my hands that is losing vblank interrupts whenever LP3 watermarks are used. If I nudge the latency value written to the WM3 register just by one in either direction the problem disappears. That to me suggests that the punit will not enter the corrsponding powersave mode (MPLL shutdown IIRC) unless the latency value in the register matches exactly what we read from SSKPD. Ie. it's not really a latency value but rather just a cookie by which the punit can identify the desired power saving state. On HSW/BDW this was changed such that we actually just write the WM level number into those bits, which makes much more sense given the observed behaviour. We could try to handle this by disallowing LP3 watermarks only when vblank interrupts are enabled but we'd first have to prove that only vblank interrupts are affected, which seems unlikely. Also we can't grab the wm mutex from the vblank enable/disable hooks because those are called with various spinlocks held. Thus we'd have to redesigne the watermark locking. So to play it safe and keep the code simple we simply disable LP3 watermarks on all SNB machines. To do that we simply zero out the latency values for watermark level 3, and we adjust the watermark computation to check for that. The behaviour now matches that of the g4x/vlv/skl wm code in the presence of a zeroed latency value. v2: s/USHRT_MAX/U32_MAX/ for consistency with the types (Chris) Cc: stable@vger.kernel.org Cc: Chris Wilson Acked-by: Chris Wilson Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101269 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103713 Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181114173440.6730-1-ville.syrjala@linux.intel.com (cherry picked from commit 03981c6ebec4fc7056b9b45f847393aeac90d060) Signed-off-by: Joonas Lahtinen Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Fix oops when pp_funcs->switch_power_profile is unset

2018-12-01T08:37:28Z

commit 919a52fc4ca137c871f295224507fa3401e08472 upstream. On Vega20 and other pre-production GPUs, powerplay is not enabled yet. Check for NULL pointers before calling pp_funcs function pointers. Also affects Kaveri. CC: Joerg Roedel Signed-off-by: Felix Kuehling Reviewed-by: Alex Deucher Tested-by: Joerg Roedel Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/vc4: Set ->legacy_cursor_update to false when doing non-async updates

2018-12-01T08:37:28Z

commit fcc86cb45d38ca2f24bcea9c29c7f4742041caed upstream. drm_atomic_helper_setup_commit() auto-completes commit->flip_done when state->legacy_cursor_update is true, but we know for sure that we want a sync update when we call drm_atomic_helper_setup_commit() from vc4_atomic_commit(). Explicitly set state->legacy_cursor_update to false to prevent this auto-completion. Fixes: 184d3cf4f738 ("drm/vc4: Use wait_for_flip_done() instead of wait_for_vblanks()") Cc: Signed-off-by: Boris Brezillon Reviewed-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/20181115105852.9844-2-boris.brezillon@bootlin.com Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Add missing firmware entry for HAINAN

2018-12-01T08:37:28Z

commit 8d4d7c58994759bbd9f4fec32d88bf0e0b89302e upstream. Due to lack of MODULE_FIRMWARE() with hainan_mc.bin, the driver doesn't work properly in initrd. Let's add it. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1116239 Fixes: 8eaf2b1faaf4 ("drm/amdgpu: switch firmware path for SI parts") Cc: Reviewed-by: Christian König Signed-off-by: Takashi Iwai Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/fb-helper: Blacklist writeback when adding connectors to fbdev

2018-12-01T08:37:28Z

commit 8fd3b90300bec541806dac271de2fd44e2e4e2d2 upstream. Writeback connectors do not produce any on-screen output and require special care for use. Such connectors are hidden from enumeration in DRM resources by default, but they are still picked-up by fbdev. This makes rather little sense since fbdev is not really adapted for dealing with writeback. Moreover, this is also a source of issues when userspace disables the CRTC (and associated plane) without detaching the CRTC from the connector (which is hidden by default). In this case, the connector is still using the CRTC, leading to am "enabled/connectors mismatch" and eventually the failure of the associated atomic commit. This situation happens with VC4 testing under IGT GPU Tools. Filter out writeback connectors in the fbdev helper to solve this. Signed-off-by: Paul Kocialkowski Reviewed-by: Boris Brezillon Reviewed-by: Maxime Ripard Tested-by: Maxime Ripard Fixes: 935774cd71fe ("drm: Add writeback connector type") Cc: # v4.19+ Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20181115163248.21168-1-paul.kocialkowski@bootlin.com Signed-off-by: Greg Kroah-Hartman

drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder()

2018-11-27T15:13:05Z

[ Upstream commit 63237f8748bdf46dccf79ef8f98f05e9fe799162 ] [why] Removing connector reusage from DM to match the rest of the tree ended up revealing an issue that was surprisingly subtle. The original amdgpu code for DC that was submitted appears to have left a chunk in dm_dp_create_fake_mst_encoder() that tries to find a "master encoder", the likes of which isn't actually used or stored anywhere. It does so at the wrong time as well by trying to access parts of the drm_connector from the encoder init before it's actually been initialized. This results in a NULL pointer deref on MST hotplugs: [ 160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 160.697234] PGD 0 P4D 0 [ 160.697814] Oops: 0010 [#1] SMP PTI [ 160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G O 4.19.0Lyude-Test+ #2 [ 160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018 [ 160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 160.700322] RIP: 0010: (null) [ 160.700920] Code: Bad RIP value. [ 160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206 [ 160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158 [ 160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000 [ 160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25 [ 160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000 [ 160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000 [ 160.705260] FS: 0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000 [ 160.705854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0 [ 160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.708372] Call Trace: [ 160.708998] ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu] [ 160.709625] ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper] [ 160.710284] ? wake_up_q+0x54/0x70 [ 160.710877] ? __mutex_unlock_slowpath.isra.18+0xb3/0x110 [ 160.711512] ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper] [ 160.712161] ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] [ 160.712762] ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper] [ 160.713408] ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper] [ 160.714013] ? process_one_work+0x1a1/0x3a0 [ 160.714667] ? worker_thread+0x30/0x380 [ 160.715326] ? wq_update_unbound_numa+0x10/0x10 [ 160.715939] ? kthread+0x112/0x130 [ 160.716591] ? kthread_create_worker_on_cpu+0x70/0x70 [ 160.717262] ? ret_from_fork+0x35/0x40 [ 160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu] [ 160.720141] CR2: 0000000000000000 Somehow the connector reusage DM was using for MST connectors managed to paper over this issue entirely; hence why this was never caught until now. [how] Since this code isn't used anywhere and seems useless anyway, we can just drop it entirely. This appears to fix the issue on my HP ZBook with an AMD WX4150. Signed-off-by: Lyude Paul Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin