user/sven/linux.git/drivers/hid, branch v4.9.243

HID: roccat: add bounds checking in kone_sysfs_write_settings()

2020-10-29T08:05:35Z

[ Upstream commit d4f98dbfe717490e771b6e701904bfcf4b4557f0 ] This code doesn't check if "settings->startup_profile" is within bounds and that could result in an out of bounds array access. What the code does do is it checks if the settings can be written to the firmware, so it's possible that the firmware has a bounds check? It's safer and easier to verify when the bounds checking is done in the kernel. Fixes: 14bf62cde794 ("HID: add driver for Roccat Kone gaming mouse") Signed-off-by: Dan Carpenter Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: core: Sanitize event code and type when mapping input

2020-09-12T09:47:31Z

commit 35556bed836f8dc07ac55f69c8d17dce3e7f0e25 upstream. When calling into hid_map_usage(), the passed event code is blindly stored as is, even if it doesn't fit in the associated bitmap. This event code can come from a variety of sources, including devices masquerading as input devices, only a bit more "programmable". Instead of taking the event code at face value, check that it actually fits the corresponding bitmap, and if it doesn't: - spit out a warning so that we know which device is acting up - NULLify the bitmap pointer so that we catch unexpected uses Code paths that can make use of untrusted inputs can now check that the mapping was indeed correct and bail out if not. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

HID: core: Correctly handle ReportSize being zero

2020-09-12T09:47:31Z

commit bce1305c0ece3dc549663605e567655dd701752c upstream. It appears that a ReportSize value of zero is legal, even if a bit non-sensical. Most of the HID code seems to handle that gracefully, except when computing the total size in bytes. When fed as input to memset, this leads to some funky outcomes. Detect the corner case and correctly compute the size. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

HID: hiddev: Fix slab-out-of-bounds write in hiddev_ioctl_usage()

2020-09-03T09:21:23Z

commit 25a097f5204675550afb879ee18238ca917cba7a upstream. `uref->usage_index` is not always being properly checked, causing hiddev_ioctl_usage() to go out of bounds under some cases. Fix it. Reported-by: syzbot+34ee1b45d88571c2fa8b@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=f2aebe90b8c56806b050a20b36f51ed6acabe802 Reviewed-by: Dan Carpenter Signed-off-by: Peilin Ye Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

HID: i2c-hid: Always sleep 60ms after I2C_HID_PWR_ON commands

2020-09-03T09:21:20Z

commit eef4016243e94c438f177ca8226876eb873b9c75 upstream. Before this commit i2c_hid_parse() consists of the following steps: 1. Send power on cmd 2. usleep_range(1000, 5000) 3. Send reset cmd 4. Wait for reset to complete (device interrupt, or msleep(100)) 5. Send power on cmd 6. Try to read HID descriptor Notice how there is an usleep_range(1000, 5000) after the first power-on command, but not after the second power-on command. Testing has shown that at least on the BMAX Y13 laptop's i2c-hid touchpad, not having a delay after the second power-on command causes the HID descriptor to read as all zeros. In case we hit this on other devices too, the descriptor being all zeros can be recognized by the following message being logged many, many times: hid-generic 0018:0911:5288.0002: unknown main item tag 0x0 At the same time as the BMAX Y13's touchpad issue was debugged, Kai-Heng was working on debugging some issues with Goodix i2c-hid touchpads. It turns out that these need a delay after a PWR_ON command too, otherwise they stop working after a suspend/resume cycle. According to Goodix a delay of minimal 60ms is needed. Having multiple cases where we need a delay after sending the power-on command, seems to indicate that we should always sleep after the power-on command. This commit fixes the mentioned issues by moving the existing 1ms sleep to the i2c_hid_set_power() function and changing it to a 60ms sleep. Cc: stable@vger.kernel.org BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208247 Reported-by: Kai-Heng Feng Reported-and-tested-by: Andrea Borgia Signed-off-by: Hans de Goede Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

HID: apple: Disable Fn-key key-re-mapping on clone keyboards

2020-07-31T14:44:03Z

[ Upstream commit a5d81646fa294eed57786a9310b06ca48902adf8 ] The Maxxter KB-BT-001 Bluetooth keyboard, which looks somewhat like the Apple Wireless Keyboard, is using the vendor and product IDs (05AC:0239) of the Apple Wireless Keyboard (2009 ANSI version) . But its F1 - F10 keys are marked as sending F1 - F10, not the special functions hid-apple.c maps them too; and since its descriptors do not contain the HID_UP_CUSTOM | 0x0003 usage apple-hid looks for for the Fn-key, apple_setup_input() never gets called, so F1 - F6 are mapped to key-codes which have not been set in the keybit array causing them to not send any events at all. The lack of a usage code matching the Fn key in the clone is actually useful as this allows solving this problem in a generic way. This commits adds a fn_found flag and it adds a input_configured callback which checks if this flag is set once all usages have been mapped. If it is not set, then assume this is a clone and clear the quirks bitmap so that the hid-apple code does not add any special handling to this keyboard. This fixes F1 - F6 not sending anything at all and F7 - F12 sending the wrong codes on the Maxxter KB-BT-001 Bluetooth keyboard and on similar clones. Cc: Joao Moreno Signed-off-by: Hans de Goede Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: i2c-hid: add Mediacom FlexBook edge13 to descriptor override

2020-07-31T14:44:03Z

[ Upstream commit 43e666acb79f3d355dd89bf20f4d25d3b15da13e ] The Mediacom FlexBook edge13 uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. Signed-off-by: Federico Ricchiuto Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: magicmouse: do not set up autorepeat

2020-07-22T07:10:51Z

commit 6363d2065cd399cf9d6dc9d08c437f8658831100 upstream. Neither the trackpad, nor the mouse want input core to generate autorepeat events for their buttons, so let's reset the bit (as hid-input sets it for these devices based on the usage vendor code). Cc: stable@vger.kernel.org Reported-by: Yariv Tested-by: Yariv Signed-off-by: Dmitry Torokhov Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

HID: i2c-hid: add Schneider SCL142ALM to descriptor override

2020-06-11T07:22:20Z

commit 6507ef10660efdfee93f0f3b9fac24b5e4d83e56 upstream. This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. Cc: stable@vger.kernel.org Signed-off-by: Julian Sax Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

HID: multitouch: add eGalaxTouch P80H84 support

2020-05-27T14:41:45Z

[ Upstream commit f9e82295eec141a0569649d400d249333d74aa91 ] Add support for P80H84 touchscreen from eGalaxy: idVendor 0x0eef D-WAV Scientific Co., Ltd idProduct 0xc002 iManufacturer 1 eGalax Inc. iProduct 2 eGalaxTouch P80H84 2019 vDIVA_1204_T01 k4.02.146 Signed-off-by: Sebastian Reichel Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin