user/sven/linux.git/drivers/hid, branch v4.9.99

HID: hidraw: Fix crash on HIDIOCGFEATURE with a destroyed device

2018-04-24T07:34:16Z

commit a955358d54695e4ad9f7d6489a7ac4d69a8fc711 upstream. Doing `ioctl(HIDIOCGFEATURE)` in a tight loop on a hidraw device and then disconnecting the device, or unloading the driver, can cause a NULL pointer dereference. When a hidraw device is destroyed it sets 0 to `dev->exist`. Most functions check 'dev->exist' before doing its work, but `hidraw_get_report()` was missing that check. Cc: stable@vger.kernel.org Signed-off-by: Rodrigo Rivas Costa Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

HID: core: Fix size as type u32

2018-04-24T07:34:12Z

commit 6de0b13cc0b4ba10e98a9263d7a83b940720b77a upstream. When size is negative, calling memset will make segment fault. Declare the size as type u32 to keep memset safe. size in struct hid_report is unsigned, fix return type of hid_report_len to u32. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

HID: Fix hid_report_len usage

2018-04-24T07:34:11Z

commit 3064a03b94e60388f0955fcc29f3e8a978d28f75 upstream. Follow the change of return type u32 of hid_report_len, fix all the types of variables those get the return value of hid_report_len to u32, and all other code already uses u32. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

HID: i2c-hid: fix size check and type usage

2018-04-24T07:34:11Z

commit ac75a041048b8c1f7418e27621ca5efda8571043 upstream. When convert char array with signed int, if the inbuf[x] is negative then upper bits will be set to 1. Fix this by using u8 instead of char. ret_size has to be at least 3, hid_input_report use it after minus 2 bytes. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

HID: i2c: Call acpi_device_fix_up_power for ACPI-enumerated devices

2018-04-13T17:48:12Z

[ Upstream commit f3d3eab667de62572376abb1aa26316191c39929 ] For ACPI devices which do not have a _PSC method, the ACPI subsys cannot query their initial state at boot, so these devices are assumed to have been put in D0 by the BIOS, but for touchscreens that is not always true. This commit adds a call to acpi_device_fix_up_power to explicitly put devices without a _PSC method into D0 state (for devices with a _PSC method it is a nop). Note we only need to do this on probe, after a resume the ACPI subsys knows the device is in D3 and will properly put it in D0. This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1 device failing to probe with a "hid_descr_cmd failed" error. Acked-by: Benjamin Tissoires Signed-off-by: Hans de Goede Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

HID: sony: Use LED_CORE_SUSPENDRESUME

2018-04-08T10:12:46Z

commit 765a1077c85e5f2efcc43582f80caf43a052e903 upstream. The LED subsystem provides the LED_CORE_SUSPENDRESUME flag to handle automatically turning off and restoring the state of device LEDs during suspend/resume. Use this flag instead of saving and restoring the state locally. Signed-off-by: Frank Praznik Signed-off-by: Jiri Kosina Cc: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman

HID: elo: clear BTN_LEFT mapping

2018-03-22T08:17:53Z

[ Upstream commit 9abd04af951e5734c9d5cfee9b49790844b734cf ] ELO devices have one Button usage in GenDesk field, which makes hid-input map it to BTN_LEFT; that confuses userspace, which then considers the device to be a mouse/touchpad instead of touchscreen. Fix that by unmapping BTN_LEFT and keeping only BTN_TOUCH in place. Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

HID: clamp input to logical range if no null state

2018-03-22T08:17:40Z

[ Upstream commit c3883fe06488a483658ba5d849b70e49bee15e7c ] This patch fixes an issue in drivers/hid/hid-input.c where values outside of the logical range are not clamped when "null state" bit of the input control is not set. This was discussed on the lists [1] and this change stems from the fact due to the ambiguity of the HID specification it might be appropriate to follow Microsoft's own interpretation of the specification. As noted in Microsoft's documentation [2] in the section titled "Required HID usages for digitizers" it is noted that values reported outside the logical range "will be considered as invalid data and the value will be changed to the nearest boundary value (logical min/max)." This patch fixes an issue where the (1292:4745) Innomedia INNEX GENESIS/ATARI reports out of range values for its X and Y axis of the DPad which, due to the null state bit being unset, are forwarded to userspace as is. Now these values will get clamped to the logical range before being forwarded to userspace. This device was also used to test this patch. This patch expands on commit 3f3752705dbd ("HID: reject input outside logical range only if null state is set"). [1]: http://lkml.kernel.org/r/20170307131036.GA853@gaia.local [2]: https://msdn.microsoft.com/en-us/library/windows/hardware/dn672278(v=vs.85).asp Signed-off-by: Tomasz Kramkowski Acked-by: Benjamin Tissoires Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

HID: reject input outside logical range only if null state is set

2018-03-22T08:17:36Z

[ Upstream commit 3f3752705dbd50b66b66ad7b4d54fe33d2f746ed ] This patch fixes an issue in drivers/hid/hid-input.c where USB HID control null state flag is not checked upon rejecting inputs outside logical minimum-maximum range. The check should be made according to USB HID specification 1.11, section 6.2.2.5, p.31. The fix will resolve issues with some game controllers, such as: https://bugzilla.kernel.org/show_bug.cgi?id=68621 [tk@the-tk.com: shortened and fixed spelling in commit message] Signed-off-by: Valtteri Heikkilä Signed-off-by: Tomasz Kramkowski Acked-By: Benjamin Tissoires Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

usb: ldusb: add PIDs for new CASSY devices supported by this driver

2018-02-28T09:18:32Z

commit 52ad2bd8918158266fc88a05f95429b56b6a33c5 upstream. This patch adds support for new CASSY devices to the ldusb driver. The PIDs are also added to the ignore list in hid-quirks. Signed-off-by: Karsten Koop Cc: stable Signed-off-by: Greg Kroah-Hartman