user/sven/linux.git/drivers/hid, branch v5.0.12

HID: logitech: Handle 0 scroll events for the m560

2019-04-17T06:39:46Z

commit fd35759ce32b60d3eb52436894bab996dbf8cffa upstream. hidpp_scroll_counter_handle_scroll() doesn't expect a 0-value scroll event, it gets interpreted as a negative scroll direction event. This can cause scroll direction resets and thus broken scrolling. Fixes: 4435ff2f09a2fc ("HID: logitech: Enable high-resolution scrolling on Logitech mice") Cc: stable@vger.kernel.org # v5.0 Reported-and-tested-by: Aimo Metsälä Signed-off-by: Peter Hutterer Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

HID: intel-ish: ipc: handle PIMR before ish_wakeup also clear PISR busy_clear bit

2019-04-05T20:34:48Z

[ Upstream commit 2edefc056e4f0e6ec9508dd1aca2c18fa320efef ] Host driver should handle interrupt mask register earlier than wake up ish FW else there will be conditions when FW interrupt comes, host PIMR register still not set ready, so move the interrupt mask setting before ish_wakeup. Clear PISR busy_clear bit in ish_irq_handler. If not clear, there will be conditions host driver received a busy_clear interrupt (before the busy_clear mask bit is ready), it will return IRQ_NONE after check_generated_interrupt, the interrupt will never be cleared, causing the DEVICE not sending following IRQ. Since PISR clear should not be called for the CHV device we do this change. After the change, both ISH2HOST interrupt and busy_clear interrupt will be considered as interrupt from ISH, busy_clear interrupt will return IRQ_HANDLED from IPC_IS_BUSY check. Signed-off-by: Song Hongyan Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: intel-ish-hid: avoid binding wrong ishtp_cl_device

2019-04-05T20:34:36Z

[ Upstream commit 0d28f49412405d87d3aae83da255070a46e67627 ] When performing a warm reset in ishtp bus driver, the ishtp_cl_device will not be removed, its fw_client still points to the already freed ishtp_device.fw_clients array. Later after driver finishing ishtp client enumeration, this dangling pointer may cause driver to bind the wrong ishtp_cl_device to the new client, causing wrong callback to be called for messages intended for the new client. This helps in development of firmware where frequent switching of firmwares is required without Linux reboot. Signed-off-by: Hong Liu Tested-by: Hongyan Song Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: debug: fix the ring buffer implementation

2019-01-29T11:09:11Z

Ring buffer implementation in hid_debug_event() and hid_debug_events_read() is strange allowing lost or corrupted data. After commit 717adfdaf147 ("HID: debug: check length before copy_to_user()") it is possible to enter an infinite loop in hid_debug_events_read() by providing 0 as count, this locks up a system. Fix this by rewriting the ring buffer implementation with kfifo and simplify the code. This fixes CVE-2019-3819. v2: fix an execution logic and add a comment v3: use __set_current_state() instead of set_current_state() Link: https://bugzilla.redhat.com/show_bug.cgi?id=1669187 Cc: stable@vger.kernel.org # v4.18+ Fixes: cd667ce24796 ("HID: use debugfs for events/reports dumping") Fixes: 717adfdaf147 ("HID: debug: check length before copy_to_user()") Signed-off-by: Vladis Dronov Reviewed-by: Oleg Nesterov Signed-off-by: Benjamin Tissoires

HID: core: simplify active collection tracking

2019-01-16T13:29:48Z

Manually tracking an active collection to set collection parents is not necessary, we just have to look one step back into the collection stack to find the correct parent. Signed-off-by: Philipp Zabel Reviewed-by: Peter Hutterer Signed-off-by: Benjamin Tissoires

HID: i2c-hid: Disable runtime PM on Goodix touchpad

2019-01-14T11:17:51Z

A Goodix touchpad doesn't work. Touching the touchpad can trigger IRQ but there's no input event from HID subsystem. Turns out it reports some invalid data: [ 22.136630] i2c_hid i2c-DELL091F:00: input: 0b 00 01 00 00 00 00 00 00 00 00 After some trial and error, it's another device that doesn't work well with ON/SLEEP commands. Disable runtime PM to fix the issue. Signed-off-by: Kai-Heng Feng Signed-off-by: Jiri Kosina

HID: core: replace the collection tree pointers with indices

2019-01-10T06:08:18Z

Previously, the pointer to the parent collection was stored. If a device exceeds 16 collections (HID_DEFAULT_NUM_COLLECTIONS), the array to store the collections is reallocated, the pointer to the parent collection becomes invalid. Replace the pointers with an index-based lookup into the collections array. Fixes: c53431eb696f3c ("HID: core: store the collections as a basic tree") Reported-by: Pandruvada, Srinivas Signed-off-by: Peter Hutterer Tested-by: Kyle Pelton Signed-off-by: Jiri Kosina

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

2019-01-06T01:53:40Z

Pull HID updates from Jiri Kosina: - high-resolution scrolling support that gracefully handles differences between MS and Logitech implementations in HW, from Peter Hutterer and Harry Cutts - MSI IRQ support for intel-ish driver, from Song Hongyan - support for new hardware (Cougar 700K, Odys Winbook 13, ASUS FX503VD, ASUS T101HA) from Daniel M. Lambea, Hans de Goede and Aleix Roca Nonell - other small assorted fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (22 commits) HID: i2c-hid: Add Odys Winbook 13 to descriptor override HID: lenovo: Add checks to fix of_led_classdev_register HID: intel-ish-hid: add MSI interrupt support HID: debug: Change to use DEFINE_SHOW_ATTRIBUTE macro HID: doc: fix wrong data structure reference for UHID_OUTPUT HID: intel-ish-hid: fixes incorrect error handling HID: asus: Add support for the ASUS T101HA keyboard dock HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice HID: logitech: Enable high-resolution scrolling on Logitech mice HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration" HID: logitech-hidpp: fix typo, hiddpp to hidpp HID: input: use the Resolution Multiplier for high-resolution scrolling HID: core: process the Resolution Multiplier HID: core: store the collections as a basic tree Input: add `REL_WHEEL_HI_RES` and `REL_HWHEEL_HI_RES` HID: input: support Microsoft wireless radio control hotkey HID: use macros in IS_INPUT_APPLICATION HID: asus: Add support for the ASUS FX503VD laptop HID: asus: Add event handler to catch unmapped Asus Vendor UsagePage codes HID: cougar: Add support for Cougar 700K Gaming Keyboard ...

Merge branches 'for-4.20/upstream-fixes', 'for-4.21/core', 'for-4.21/hid-asus', 'for-4.21/hid-core', 'for-4.21/hid-cougar', 'for-4.21/hidraw', 'for-4.21/highres-wheel' and 'for-4.21/ish' into for-linus

2019-01-03T11:50:28Z

HID: i2c-hid: Add Odys Winbook 13 to descriptor override

2019-01-03T10:31:18Z

The Odys Winbook 13 uses a SIPODEV SP1064 touchpad, which does not supply descriptors, add this to the DMI descriptor override list, fixing the touchpad not working. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1526312 Reported-by: Rene Wagner Signed-off-by: Hans de Goede Signed-off-by: Jiri Kosina