user/sven/linux.git/drivers/i2c, branch v3.8.4

i2c-designware: add missing MODULE_LICENSE

2013-01-22T15:43:34Z

The driver can also be built as a module so add MODULE_LICENSE for it. In addition add MODULE_DESCRIPTION as well. Signed-off-by: Mika Westerberg Signed-off-by: Wolfram Sang

i2c: omap: fix draining irq handling

2013-01-22T15:17:05Z

Commit 0bdfe0cb803dce699ff337c35d8e97ac355fa417 (i2c: omap: sanitize exit path) changed the interrupt handler to exit early and complete the transfer after the draining IRQ is handled. As a result, the ARDY may not be cleared properly, and it may cause all future I2C transfers to timeout with "timeout waiting for bus ready". This is reproducible at least with N900 when twl4030_gpio makes a long write (> FIFO size) during the probe (http://marc.info/?l=linux-omap&m=135818882610432&w=2). The fix is to continue until we get ARDY interrupt that completes the transfer. Tested with 3.8-rc4 + N900: 20 boots in a row without errors; without the patch the problem triggers after few reboots. Signed-off-by: Aaro Koskinen Acked-by: Felipe Balbi Signed-off-by: Wolfram Sang

i2c: omap: errata i462: fix incorrect ack for arbitration lost interrupt

2013-01-22T15:17:04Z

The errata handling function acks wrong interrupt in case of "Arbitration lost". Fix it. Discovered during code review, the real impact of the bug is unknown. Signed-off-by: Aaro Koskinen Reviewed-by: Felipe Balbi Signed-off-by: Wolfram Sang

i2c: muxes: fix wrong use of sizeof(ptr)

2013-01-22T08:54:32Z

sizeof when applied to a pointer typed expression gives the size of the pointer The semantic patch that makes this output is available in scripts/coccinelle/misc/noderef.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Laurent Navet Acked-by: Jean Delvare Signed-off-by: Wolfram Sang

i2c: sirf: register i2c_client from dt child-nodes in probe entry

2013-01-22T08:54:31Z

in probe() entry of i2c_driver, set the of node of adapter and call of_i2c_register_devices to register all i2c_client from dt child-nodes Signed-off-by: Barry Song Signed-off-by: Wolfram Sang

i2c: mxs: Fix type of error code

2013-01-22T08:54:23Z

cmd_err is used to handle error code, so it should not be unsigned. This fixes the following warning when building with W=1 option: drivers/i2c/busses/i2c-mxs.c: In function 'mxs_i2c_xfer_msg': drivers/i2c/busses/i2c-mxs.c:331:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Wolfram Sang Cc: stable@kernel.org

i2c: mxs: Fix misuse init_completion

2013-01-21T15:26:29Z

The init_completion() call does reinit not only the variable carrying the flag that the completion finished, but also initialized the waitqueue associated with the completion. On the contrary, the INIT_COMPLETION() call only reinits the flag. In case there was anything still stuck in the waitqueue, subsequent call to init_completion() would be able to create possible race condition. This patch uses the proper function and moves init_completion() into .probe() call of the driver, to be issued only once. Note that such scenario is impossible, since two threads can never enter the mxs_i2c_xfer_msg(), since whole this section is protected by mutex in I2C core. This by no means allows this issue to exit though. Signed-off-by: Marek Vasut Signed-off-by: Wolfram Sang

i2c: remove __dev* attributes from subsystem

2012-12-22T19:13:45Z

CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton Acked-by: Peter Korsgaard (for ocores and mux-gpio) Acked-by: Havard Skinnemoen (for i2c-gpio) Acked-by: Guan Xuetao (for puf3) Acked-by: Barry Song (for sirf) Reviewed-by: Jean Delvare [wsa: Fixed "foo* bar" flaws while we are here] Signed-off-by: Wolfram Sang

Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux

2012-12-19T00:51:10Z

Pull i2c-embedded changes from Wolfram Sang: - CBUS driver (an I2C variant) - continued rework of the omap driver - s3c2410 gets lots of fixes and gains pinctrl support - at91 gains DMA support - the GPIO muxer gains devicetree probing - typical fixes and additions all over * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits) i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag i2c: at91: add dma support i2c: at91: change struct members indentation i2c: at91: fix compilation warning i2c: mxs: Do not disable the I2C SMBus quick mode i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Remove recently introduced performance overheads i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block i2c: s3c2410: Add fix for i2c suspend/resume i2c: s3c2410: Fix code to free gpios i2c: i2c-cbus-gpio: introduce driver i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions i2c: ocores: Add irq support for sparc i2c: omap: Move the remove constraint ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049 i2c: s3c2410: do not special case HDMIPHY stuck bus detection i2c: s3c2410: use exponential back off while polling for bus idle i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY i2c: s3c2410: grab adapter lock while changing i2c clock i2c: s3c2410: Add support for pinctrl ...

Merge tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

2012-12-17T02:55:20Z

Pull MFS update from Samuel Ortiz: "This is the MFD patch set for the 3.8 merge window. We have several new drivers, most of the time coming with their sub devices drivers: - Austria Microsystem's AS3711 - Nano River's viperboard - TI's TPS80031, AM335x TS/ADC, - Realtek's MMC/memstick card reader - Nokia's retu We also got some notable cleanups and improvements: - tps6586x got converted to IRQ domains. - tps65910 and tps65090 moved to the regmap IRQ API. - STMPE is now Device Tree aware. - A general twl6040 and twl-core cleanup, with moves to the regmap I/O and IRQ APIs and a conversion to the recently added PWM framework. - sta2x11 gained regmap support. Then the rest is mostly tiny cleanups and fixes, among which we have Mark's wm5xxx and wm8xxx patchset." Far amount of annoying but largely trivial conflicts. Many due to __devinit/exit removal, others due to one or two of the new drivers also having come in through another tree. * tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits) mfd: tps6507x: Convert to devm_kzalloc mfd: stmpe: Update DT support for stmpe driver mfd: wm5102: Add readback of DSP status 3 register mfd: arizona: Log if we fail to create the primary IRQ domain mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ mfd: tps80031: Add terminating entry for tps80031_id_table mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask() mfd: wm5102: Add tuning for revision B mfd: arizona: Defer patch initialistation until after first device boot mfd: tps65910: Fix wrong ack_base register mfd: tps65910: Remove unused data mfd: stmpe: Get rid of irq_invert_polarity mfd: ab8500-core: Fix invalid free of devm_ allocated data mfd: wm5102: Mark DSP memory regions as volatile mfd: wm5102: Correct default for LDO1_CONTROL_2 mfd: arizona: Register haptics devices mfd: wm8994: Make current device behaviour the default mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ mfd: Fix stmpe.c build when OF is not enabled mfd: jz4740-adc: Use devm_kzalloc ...