user/sven/linux.git/drivers/iio/frequency/Kconfig, branch master

iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig

2024-10-10T18:27:25Z

This driver makes use of regmap_spi, but does not select the required module. Add the missing 'select REGMAP_SPI'. Fixes: b59c04155901 ("iio: frequency: admv4420.c: Add support for ADMV4420") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241007-ad2s1210-select-v2-2-7345d228040f@gmail.com Signed-off-by: Jonathan Cameron

iio: frequency: {admv4420,adrf6780}: format Kconfig entries

2024-10-10T18:27:25Z

Format the entries of these drivers in the Kconfig, where spaces instead of tabs were used. Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241007-ad2s1210-select-v2-1-7345d228040f@gmail.com Signed-off-by: Jonathan Cameron

iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig

2024-10-06T15:30:53Z

This driver makes use of regmap_spi, but does not select the required module. Add the missing 'select REGMAP_SPI'. Fixes: eda549e2e524 ("iio: frequency: adf4377: add support for ADF4377") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241003-ad2s1210-select-v1-3-4019453f8c33@gmail.com Cc: Signed-off-by: Jonathan Cameron

iio: frequency: admfm2000: New driver

2024-02-17T16:16:10Z

Dual microwave down converter module with input RF and LO frequency ranges from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz. It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down conversion path. Signed-off-by: Kim Seer Paller Link: https://lore.kernel.org/r/20240123081059.5746-2-kimseer.paller@analog.com Signed-off-by: Jonathan Cameron

iio: frequency: adf4377: add support for ADF4377

2022-11-23T21:05:51Z

The ADF4377 is a high performance, ultralow jitter, dual output integer-N phased locked loop (PLL) with integrated voltage controlled oscillator (VCO) ideally suited for data converter and mixed signal front end (MxFE) clock applications. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adf4377.pdf Signed-off-by: Antoniu Miclaus Reviewed-by: Nuno Sá Link: https://lore.kernel.org/r/20221115110041.71495-2-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron

iio: frequency: admv4420.c: Add support for ADMV4420

2022-02-27T12:16:49Z

Add support for K Band Downconverter with Integrated Fractional-N PLL and VCO. More info: https://www.analog.com/en/products/admv4420.html Signed-off-by: Cristian Pop Link: https://lore.kernel.org/r/20220223130808.13352-2-cristian.pop@analog.com Signed-off-by: Jonathan Cameron

iio: frequency: admv1014: add support for ADMV1014

2022-02-21T19:33:06Z

The ADMV1014 is a silicon germanium (SiGe), wideband, microwave downconverter optimized for point to point microwave radio designs operating in the 24 GHz to 44 GHz frequency range. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADMV1014.pdf Signed-off-by: Antoniu Miclaus Link: https://lore.kernel.org/r/20220215081216.67706-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron

iio: frequency: admv1013: add support for ADMV1013

2021-12-23T11:53:48Z

The ADMV1013 is a wideband, microwave upconverter optimized for point to point microwave radio designs operating in the 24 GHz to 44 GHz radio frequency (RF) range. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADMV1013.pdf Signed-off-by: Antoniu Miclaus Link: https://lore.kernel.org/r/20211221112206.97066-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron

iio: frequency: adrf6780: add support for ADRF6780

2021-10-21T20:00:59Z

The ADRF6780 is a silicon germanium (SiGe) design, wideband, microwave upconverter optimized for point to point microwave radio designs operating in the 5.9 GHz to 23.6 GHz frequency range. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADRF6780.pdf Signed-off-by: Antoniu Miclaus Link: https://lore.kernel.org/r/20211021113244.56936-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2019-07-01T08:58:13Z

Jonathan writes: Second set of IIO device support, features, cleanups and minor fixes for 5.3. A few bits for the counters subsystem mixed in here as well. There are some late breaking fixes as well, which aren't so urgent they can't wait for the merge window. New Device Support * adf4371 - New driver + bindings. - Support the adf4372 PLL. Mostly ID and bindings. * ad8366 (note includes rework of driver needed to allow support for these). - Support the ADL5240 variable gain amplifier (VGA). - Support the ADA4961 digital gain amplifier (DGA). * dps310 - New driver, in several parts from different authors for this temp and pressure sensor. - Includes errata workaround for a temperature reading issue. * stk3310 - Support the stk3335, mostly ID. Features and cleanups * core - drop error handling on debugfs registration. - harden by making sure we don't overrun iio_chan_info_postfix. * docs - convert remaining docs to rst. At somepoint we'll fit these few into the main IIO docs. - improve sampling_frequency_available docs but explaining the range form. * ad_sigma_delta - Drop a pointless goto. * ad2s1210 - Drop pointless platform data null check seeing as we don't actually use platform data anymore. * ad7124 - Relax limitation on channel numbers to allow pseudo different channels. - Support control of whether the input is buffered via DT. - Use dynamic allocation for channel configuration to make it easier to support new devices. - YAML binding conversion. * ad7150 - Comment tidy up. - Consistent and simple if (ret) handling of i2c errors. - FIELD_GET and GENMASK. - Ternary rather than !!(condition) for readability. - Use macros to avoid repetition of channel definitions. * ad7606 - Add software channel config (rather that pin controlled) - Refactor to simplify addition of new part in future. * ad7746 - of_deivce_id table. * ad7780 - MAINTAINERS entry - YAML DT bindings. * ad8366 - Stop using core mlock in favour of well scoped local lock. - SPDX + copyright date update. * ad9834 - of_device_id table * adf4371 - Add support for output stage muting before lock on has occured. * adis library - MAINTAINERS entry to reflect that this now Alexandru's problem ;) * adis162xx: - Fix a slightly incorrect set of comments and print statements on minimum supported voltage. * adis16203 - of_device_id table. * adis16240 - Add of_device_id table (in two parts as first patch only used it for MODULE_DEVICE_TABLE.) * adt7316-spi - of_device_id table * adxl372 - YAML DT binding conversion. - Cleanup use of buffer callback functions (precursor to core rework). * bh1710 - Simplify getting the i2c adapter from the client. * dht11 - Mote to newer GPIO consumer interface. * kxcjk-1013.c - Add binding for sensor in display of some ultrabooks after userspace tools updated for it not be a problem to report two similar sensors. * imx7d - drop unused variables. - white space - define instead of variable for clock frequency that is fixed. - drop pointless error message. * messon_saradc - SPDX * sps30 - MAINTAINERS entry - YAML binding conversion. * st_accel - Tidy up ordering in various buffer related callbacks. This is part of a long running effort to simplify the core code. * stm32-dfsdm: - Manage the resolution cleanly in triggerd modes. - Add fast mode support which allows more flexible filter choices. - Add a comment on the reason for a 16 bit record when technically not 'required'. * st_lsm6dsx - Embed device name in the sensor_settings struct as i3c doesn't have a convenient name field to use for this. * xilinx-adc - Relax constraints on supported platforms to reflect that this can used with FPGAs on PCIe cards and hence many architectures. * counters/ftm-quaddec - Fix some formatting io MODULE_AUTHOR - MAINTAINERS entry Fixes * tools - fix incorrect handling of 32 bit channels. * sca3000 - Potential endian bug that is unlikely to bite anyone (be64 host seems unlikely for this old part). * stm32-adc - Add vdda-supply. On some boards it needs to be turned on to supply the ADC. DT bindings included. * stm32-dfsdm - Fix output resolution to work with filter orders other than 3. - Fix output datatype as it's signed and previously claimed not to be. * tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits) iio: iio-utils: Fix possible incorrect mask calculation iio: frequency: adf4371: Add support for output stage mute dt-bindings: iio: frequency: Add ADF4372 PLL documentation iio: frequency: adf4371: Add support for ADF4372 PLL dt-bindings: iio: adc: Add buffered input property Convert AD7124 bindings documentation to YAML format. iio: adc: ad7124: Shift to dynamic allocation for channel configuration iio: adc: ad7124: Add buffered input support iio: adc: ad7124: Remove input number limitation MAINTAINERS: add ADIS IMU driver library entry iio: adis162xx: fix low-power docs & reports counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR iio: core: no need to check return value of debugfs_create functions docs: iio: convert to ReST iio: adc: stm32-adc: add missing vdda-supply dt-bindings: iio: adc: stm32: add missing vdda supply iio: adc: stm32-dfsdm: add comment for 16 bits record iio: adc: stm32-dfsdm: add fast mode support iio: adc: stm32-dfsdm: manage data resolution in trigger mode iio: adc: stm32-dfsdm: fix data type ...