user/sven/linux.git/drivers/input/ff-memless.c, branch v4.4.118

[media] fixp-arith: replace sin/cos table by a better precision one

2015-03-02T17:50:06Z

The cos table used at fixp-arith.h has only 8 bits of precision. That causes problems if it is reused on other drivers. As some media drivers require a higher precision sin/cos implementation, replace the current implementation by one that will provide 32 bits precision. The values generated by the new implementation matches the 32 bit precision of glibc's sin for an angle measured in integer degrees. It also provides support for fractional angles via linear interpolation. On experimental calculus, when used a table with a 0.001 degree angle, the maximum error for sin is 0.000038, which is likely good enough for practical purposes. There are some logic there that seems to be specific to the usage inside ff-memless.c. Move those logic to there, as they're not needed elsewhere. Cc: Hans de Goede Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Prashant Laddha Signed-off-by: Hans Verkuil Acked-by: Dmitry Torokhov Signed-off-by: Mauro Carvalho Chehab

Input: random formatting fixes

2012-08-22T05:29:49Z

Fixes for some coding style issues reported by scripts/checkpatch.pl utility. Signed-off-by: Baodong Chen Signed-off-by: Dmitry Torokhov

Input: ff-memless - fix a couple min_t() casts

2012-07-08T01:20:12Z

envelope->attack_level is a u16 type. We're trying to clamp it here so it's between 0 and 0x7fff. Unfortunately, the cast to __s16 turns all the values larger than 0x7fff into negative numbers and min_t() thinks they are less than 0x7fff. envelope_level is an int so now we've got negative values stored there. Signed-off-by: Dan Carpenter Signed-off-by: Dmitry Torokhov

[media] Input: move drivers/input/fixp-arith.h to include/linux

2012-05-14T12:47:23Z

Move drivers/input/fixp-arith.h to include/linux so that the functions defined there can be used by other subsystems, for instance some video devices ISPs can control the output HUE value by setting registers for sin(HUE) and cos(HUE). Signed-off-by: Antonio Ospite Acked-by: Dmitry Torokhov Signed-off-by: Mauro Carvalho Chehab

Input: use pr_fmt and pr_

2010-12-01T07:10:26Z

Signed-off-by: Joe Perches Signed-off-by: Dmitry Torokhov

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

Input: ff-memless - add notion of direction to for rumble effects

2009-12-25T05:54:29Z

This adds simple direction calculation when combining effects. It's useful to decide motor direction for rumble (vibrator). Signed-off-by: Jari Vanhala Acked-by: Anssi Hannula Signed-off-by: Dmitry Torokhov

Input: ff-memless - another fix for signed to unsigned overflow

2009-12-25T05:54:09Z

The commit 9e68177ef93b2f34eee5a1e1707bceef4b9ba69c changed 'gain' from signed to unsigned to fix an issue with rumble effect calculation, however it introduced problems when calculating constant effects. Having 'gain' being unsigned int was an unfortunate choice since it dominates all implicit type conversions causing everything to be treated as unsigned int. Let's change it back to signed int and simply add proper casts to rumble effect calculations. Reported-by: Gary Stein Acked-by: Anssi Hannula Signed-off-by: Dmitry Torokhov

Input: ff-memless - start playing FF effects immediately

2009-12-25T05:53:38Z

Instead of waiting for the next timer tick to start playing an effect do it immediately. This mostly helps systems using low HZ setting. Signed-off-by: Jari Vanhala Acked-by: Anssi Hannula Signed-off-by: Dmitry Torokhov

Input: fix locking in memoryless force-feedback devices

2009-11-11T05:13:32Z

Now that input core acquires dev->event_lock spinlock and disables interrupts when propagating input events, using spin_lock_bh() in ff-memless driver is not allowed. Actually, the timer_lock itself is not needed anymore, we should simply use dev->event_lock as well. Also do a small cleanup in force-feedback core. Reported-by: kerneloops.org Reported-by: http://www.kerneloops.org/searchweek.php?search=ml_ff_set_gain Reported-by: Arjan van de Ven Signed-off-by: Dmitry Torokhov