user/sven/linux.git/drivers/input/keyboard/Makefile, branch v5.4.205

Input: remove w90x900 keyboard driver

2019-08-09T22:16:37Z

The ARM w90x900 platform is getting removed, so this driver is obsolete. Signed-off-by: Arnd Bergmann Signed-off-by: Dmitry Torokhov

Input: add Apple SPI keyboard and trackpad driver

2019-07-19T08:58:34Z

The keyboard and trackpad on recent MacBook's (since 8,1) and MacBookPro's (13,* and 14,*) are attached to an SPI controller instead of USB, as previously. The higher level protocol is not publicly documented and hence has been reverse engineered. As a consequence there are still a number of unknown fields and commands. However, the known parts have been working well and received extensive testing and use. In order for this driver to work, the proper SPI drivers need to be loaded too; for MB8,1 these are spi_pxa2xx_platform and spi_pxa2xx_pci; for all others they are spi_pxa2xx_platform and intel_lpss_pci. Link: https://bugzilla.kernel.org/show_bug.cgi?id=99891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=108331 Signed-off-by: Ronald Tschalär Reviewed-by: Andy Shevchenko Signed-off-by: Dmitry Torokhov

Input: qt1050 - add Microchip AT42QT1050 support

2019-05-07T21:12:43Z

Add initial support for the AT42QT1050 (QT1050) device. The device supports up to five input keys, dependent on the mode. Since it adds only the initial support, the "1 to 4 keys plus Guard Channel" mode isn't supported. Signed-off-by: Marco Felsch Reviewed-by: Rob Herring Signed-off-by: Dmitry Torokhov

input: Add MediaTek PMIC keys support

2018-04-16T14:16:11Z

This patch add support to handle MediaTek PMIC MT6397/MT6323 key interrupts including pwrkey and homekey, also add setting for long press key shutdown behavior. Signed-off-by: Chen Zhong Acked-by: Dmitry Torokhov Signed-off-by: Lee Jones

input: keyboard: remove bf54x driver

2018-03-26T13:56:58Z

The blackfin architecture is getting removed, so this driver is now obsolete. Acked-by: Dmitry Torokhov Signed-off-by: Arnd Bergmann

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Input: add D-Link DIR-685 touchkeys driver

2017-06-05T22:35:32Z

This adds support for the D-Link DIR-685 touchkeys found in the router with this name. The vendor code calles this a "touchpad" but we are registering it here under its real name. Signed-off-by: Linus Walleij Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov

Input: tm2-touchkey - add touchkey driver support for TM2

2017-01-18T22:50:23Z

This patch adds support for the TM2 touch key and led functionality. The driver interfaces with userspace through an input device and reports KEY_PHONE and KEY_BACK event types. LED brightness can be controlled by "/sys/class/leds/tm2-touchkey/brightness". Signed-off-by: Beomho Seo Signed-off-by: Jaechul Lee Reviewed-by: Javier Martinez Canillas Reviewed-by: Andi Shyti Reviewed-by: Chanwoo Choi Tested-by: Chanwoo Choi Acked-by: Krzysztof Kozlowski Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov

Input: add ADC resistor ladder driver

2016-08-30T03:00:58Z

A common way of multiplexing buttons on a single input in cheap devices is to use a resistor ladder on an ADC. This driver supports that configuration by polling an ADC channel provided by IIO. Acked-by: Jonathan Cameron Signed-off-by: Alexandre Belloni Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov

input: keyboard: imx: add snvs power key driver

2015-07-15T02:17:06Z

add snvs power key driver. It work in imx chips after i.mx6sx ON/OFF key used power on/off whole system. This driver make it wakeup from suspend state when short press ON/OFF key. Long time press will trig SNVS power off chip without software intervention. Signed-off-by: Robin Gong Signed-off-by: Frank Li Acked-by: Dmitry Torokhov Signed-off-by: Shawn Guo