user/sven/linux.git/drivers/input/misc/Makefile, branch v3.19.6

Input: add haptic driver on max77693

2014-09-12T06:40:28Z

This driver to supports the haptic controller on MAX77693 Multifunction device with PMIC, CHARGER, LED, MUIC, HAPTIC. This driver supports external pwm and LRA (Linear Resonant Actuator) motor. User can control the haptic device via force feedback framework. Signed-off-by: Jaewon Kim Acked-by: Chanwoo Choi Signed-off-by: Dmitry Torokhov

Input: introduce palmas-pwrbutton

2014-09-12T06:40:16Z

Many palmas family of PMICs have support for interrupt based power button. This allows the device to notify the processor of external push button events over the shared palmas interrupt. However, this event is generated only during a "press" operation. Software is supposed to poll(sigh!) for detecting a release event. The PMIC also supports ability to power off independent of the software decisions when the button is pressed for a long duration if the PMIC is appropriately configured on the platform. Even though the function is similar to twl4030_pwrbutton, it is substantially different in operation to belong to a new driver of it's own. Based on original work done by Girish S Ghongdemath Signed-off-by: Nishanth Menon Signed-off-by: Dmitry Torokhov

Input: add support for the DRV2667 haptic driver

2014-09-08T23:16:23Z

Adding support for the DRV2667 haptic driver. This device has the ability to store vibration patterns in RAM and execute them once the GO bit is set. The initial driver sets a basic waveform in the first waveform sequence and will play the waveform when the GO bit is set and will continously play the waveform until the GO bit is unset. Data sheet is here: http://www.ti.com/product/drv2667 Signed-off-by: Dan Murphy Signed-off-by: Dmitry Torokhov

Input: drv260x - add TI drv260x haptics driver

2014-08-20T05:19:28Z

Add the TI drv260x haptics/vibrator driver. This device uses the input force feedback to produce a wave form to driver an ERM or LRA actuator device. The initial driver supports the devices real time playback mode. But the device has additional wave patterns in ROM. This functionality will be added in future patchsets. Product data sheet is located here: http://www.ti.com/product/drv2605 Signed-off-by: Dan Murphy Signed-off-by: Dmitry Torokhov

Input: add driver for SOC button array

2014-03-31T06:40:56Z

This patch adds support for the GPIO buttons on some Intel Bay Trail tablets originally running Windows 8. The ACPI description of these buttons follows "Windows ACPI Design Guide for SoC Platforms". Signed-off-by: Lejun Zhu Signed-off-by: Dmitry Torokhov

Input: add a new driver for GPIO beeper

2013-11-26T23:54:49Z

This patch adds a new driver for the beeper controlled via GPIO pin. The driver does not depend on the architecture and is positioned as a replacement for the specific drivers that are used for this function. Signed-off-by: Alexander Shiyan Signed-off-by: Dmitry Torokhov

Input: add driver for slidebar on Lenovo IdeaPad laptops

2013-08-26T16:30:03Z

This driver adds support for slidebars found on some Lenovo IdeaPad laptops (the slidebars work with SlideNav/Desktop Navigator under Windows). Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16004 Registers 'IdeaPad Slidebar' input device and /sys/devices/platform/ideapad_slidebar/slidebar_mode for switching slidebar's modes. Now works on: IdeaPad Y550, Y550P. May work on (testing and adding new models is needed): Ideapad Y560, Y460, Y450, Y650, and, probably, some others. Signed-off-by: Andrey Moiseev Signed-off-by: Dmitry Torokhov

Input: sirfsoc_pwrc - add onkey input driver for CSR SiRFprimaII PWRC

2013-06-03T06:49:12Z

There is an embedded PWRC(power controller) in SiRFprimaII and SiRFatlasVI, we have an ONKEY button which can generate interrupt to IRQ controller. In a typical user scenarios, at the runtime, if users touch the key, we put system to s2ram status. Signed-off-by: Binghua Duan Signed-off-by: Xianglong Du Signed-off-by: Barry Song Signed-off-by: Dmitry Torokhov

Merge tag 'v3.9-rc3' into next

2013-03-18T02:40:50Z

Merge with mainline to bring in module_platform_driver_probe() and devm_ioremap_resource().

Input: add IMS Passenger Control Unit driver

2013-03-12T15:50:22Z

The PCU is a device installed in the armrest of a plane seat and is connected to IMS Rave Entertainment System. It has a set of control buttons (Volume Up/Down, Attendant, Lights, etc) on one side and gamepad-like controls on the other side. Originally the device was handled from userspace and because of that it presents itself on USB bus as a CDC-ACM modem device that however can not make calls. However the custom handling is not as convenient as using standard input subsystem facilities. If it was pure input device it would be possible to continue using userspace solution (moving it over to uinput), but the device also has backlighted keys which can not be supported via uinput. Signed-off-by: Dmitry Torokhov