user/sven/linux.git/drivers/input/misc, branch v4.2.2

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2015-08-09T07:38:42Z

Pull input subsystem fixes from Dmitry Torokhov: "Just small ALPS and Elan touchpads, and other driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - add special check for fw_version 0x470f01 touchpad Input: twl4030-vibra - fix ERROR: Bad of_node_put() warning Input: alps - only Dell laptops have separate button bits for v2 dualpoint sticks Input: axp20x-pek - add module alias Input: turbografx - fix potential out of bound access

Input: twl4030-vibra - fix ERROR: Bad of_node_put() warning

2015-08-05T18:11:37Z

Fix following: [ 8.862274] ERROR: Bad of_node_put() on /ocp/i2c@48070000/twl@48/audio [ 8.869293] CPU: 0 PID: 1003 Comm: modprobe Not tainted 4.2.0-rc2-letux+ #1175 [ 8.876922] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 8.883514] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 8.891693] [] (show_stack) from [] (dump_stack+0x78/0x94) [ 8.899322] [] (dump_stack) from [] (kobject_release+0x68/0x7c) [ 8.907409] [] (kobject_release) from [] (twl4030_vibra_probe+0x74/0x188 [twl4030_vibra]) [ 8.917877] [] (twl4030_vibra_probe [twl4030_vibra]) from [] (platform_drv_probe+0x48/0x90) [ 8.928497] [] (platform_drv_probe) from [] (really_probe+0xd4/0x238) [ 8.937103] [] (really_probe) from [] (driver_probe_device+0x30/0x48) [ 8.945678] [] (driver_probe_device) from [] (__driver_attach+0x68/0x8c) [ 8.954589] [] (__driver_attach) from [] (bus_for_each_dev+0x50/0x84) [ 8.963226] [] (bus_for_each_dev) from [] (bus_add_driver+0xcc/0x1e4) [ 8.971832] [] (bus_add_driver) from [] (driver_register+0x9c/0xe0) [ 8.980255] [] (driver_register) from [] (do_one_initcall+0x100/0x1b8) [ 8.988983] [] (do_one_initcall) from [] (do_init_module+0x58/0x1c0) [ 8.997497] [] (do_init_module) from [] (SyS_init_module+0x54/0x64) [ 9.005950] [] (SyS_init_module) from [] (ret_fast_syscall+0x0/0x54) [ 9.015838] input: twl4030:vibrator as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:audio/input/input2 node passed to of_find_node_by_name is put inside that function and new node is returned if found. Free returned node not already freed node. Signed-off-by: Marek Belisko Signed-off-by: Dmitry Torokhov

Input: axp20x-pek - add module alias

2015-08-03T21:11:46Z

Add a proper module alias so the driver can be autoloaded when the parent axp20x mfd driver registers its cells. Signed-off-by: Chen-Yu Tsai Acked-by: Carlo Caione Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2015-07-04T15:14:22Z

Pull second round of input updates from Dmitry Torokhov: "A new driver for Weida wdt87xx touch controllers, and a bunch of fixups for other drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wdt87xx_i2c - add a scaling factor for TOUCH_MAJOR event Input: wdt87xx_i2c - remove stray newline in diagnostic message Input: arc_ps2 - add HAS_IOMEM dependency Input: wdt87xx_i2c - fix format warning Input: improve parsing OF parameters for touchscreens Input: edt-ft5x06 - mark as direct input device Input: use for_each_set_bit() where appropriate Input: add a driver for wdt87xx touchscreen controller Input: axp20x-pek - fix reporting button state as inverted Input: xpad - re-send LED command on present event Input: xpad - set the LEDs properly on XBox Wireless controllers Input: imx_keypad - check for clk_prepare_enable() error

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

2015-07-01T17:49:25Z

Pull module updates from Rusty Russell: "Main excitement here is Peter Zijlstra's lockless rbtree optimization to speed module address lookup. He found some abusers of the module lock doing that too. A little bit of parameter work here too; including Dan Streetman's breaking up the big param mutex so writing a parameter can load another module (yeah, really). Unfortunately that broke the usual suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were appended too" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits) modules: only use mod->param_lock if CONFIG_MODULES param: fix module param locks when !CONFIG_SYSFS. rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE() module: add per-module param_lock module: make perm const params: suppress unused variable error, warn once just in case code changes. modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'. kernel/module.c: avoid ifdefs for sig_enforce declaration kernel/workqueue.c: remove ifdefs over wq_power_efficient kernel/params.c: export param_ops_bool_enable_only kernel/params.c: generalize bool_enable_only kernel/module.c: use generic module param operaters for sig_enforce kernel/params: constify struct kernel_param_ops uses sysfs: tightened sysfs permission checks module: Rework module_addr_{min,max} module: Use __module_address() for module_address_lookup() module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING module: Optimize __module_address() using a latched RB-tree rbtree: Implement generic latch_tree seqlock: Introduce raw_read_seqcount_latch() ...

Input: axp20x-pek - fix reporting button state as inverted

2015-06-24T21:55:53Z

Currently we are reporting the button state as inverted on all boards with an axp209 pmic, tested on a ba10-tvbox, bananapi, bananapro, cubietruck and utoo-p66 tablet. The axp209 datasheet clearly states that the power button must be connected between the PWRON key and ground. Which means that on a press we will get a falling edge (dbf) irq not a rising one, and likewise on release we will get a rising edge (dbr) irq, not a falling one. This commit swaps the check for the 2 irqs fixing the inverted reporting of the power button state. Signed-off-by: Hans de Goede Acked-by: Chen-Yu Tsai Acked-by: Carlo Caione Signed-off-by: Dmitry Torokhov

Input: improve usage of gpiod API

2015-06-17T00:09:14Z

Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Simplify drivers accordingly. Note that in the case of the drv260x driver error checking is more strict now because -ENOSYS is reported to the caller now. But this should only be returned if GPIOLIB is disabled which shouldn't happen as the driver depends on GPIOLIB. Signed-off-by: Uwe Kleine-König Reviewed-by: Linus Walleij Signed-off-by: Dmitry Torokhov

Input: add OnKey driver for DA9063 MFD part

2015-06-09T18:23:24Z

This adds OnKey driver support for DA9063. Signed-off-by: Steve Twiss Signed-off-by: Dmitry Torokhov

kernel/params: constify struct kernel_param_ops uses

2015-05-28T02:02:10Z

Most code already uses consts for the struct kernel_param_ops, sweep the kernel for the last offending stragglers. Other than include/linux/moduleparam.h and kernel/params.c all other changes were generated with the following Coccinelle SmPL patch. Merge conflicts between trees can be handled with Coccinelle. In the future git could get Coccinelle merge support to deal with patch --> fail --> grammar --> Coccinelle --> new patch conflicts automatically for us on patches where the grammar is available and the patch is of high confidence. Consider this a feature request. Test compiled on x86_64 against: * allnoconfig * allmodconfig * allyesconfig @ const_found @ identifier ops; @@ const struct kernel_param_ops ops = { }; @ const_not_found depends on !const_found @ identifier ops; @@ -struct kernel_param_ops ops = { +const struct kernel_param_ops ops = { }; Generated-by: Coccinelle SmPL Cc: Rusty Russell Cc: Junio C Hamano Cc: Andrew Morton Cc: Kees Cook Cc: Tejun Heo Cc: Ingo Molnar Cc: cocci@systeme.lip6.fr Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: Rusty Russell

Input: adxl34x - add OF match support

2015-05-21T23:58:02Z

The I2C subsystem can match devices without explicit OF support based on the part of their compatible property after the comma. However, this mechanism uses the first compatible value only. For adxl34x OF device nodes the compatible property will contain the more specific "adi,adxl345" or "adi,adxl346" value first. This prevents the device node from being matched with the adxl34x driver. Fix this by adding an OF match table with an "adi,adxl345" compatible entry. There's no need to add the "adi,adxl346" entry as the ADXL346 is backward-compatible with the ADXL345 with differences handled by runtime detection of the device model. Signed-off-by: Laurent Pinchart Reviewed-by: Wolfram Sang Signed-off-by: Geert Uytterhoeven Signed-off-by: Dmitry Torokhov