user/sven/linux.git/drivers/input/mouse, branch v3.10.106

Input: elantech - mark protocols v2 and v3 as semi-mt

2016-02-25T19:57:49Z

commit 6544a1df11c48c8413071aac3316792e4678fbfb upstream. When using a protocol v2 or v3 hardware, elantech uses the function elantech_report_semi_mt_data() to report data. This devices are rather creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid touch is reported. Anyway, userspace (libinput) is now confused by these (0,0) touches, and detect them as palm, and rejects them. Commit 3c0213d17a09 ("Input: elantech - fix semi-mt protocol for v3 HW") was sufficient enough for xf86-input-synaptics and libinput before it has palm rejection. Now we need to actually tell libinput that this device is a semi-mt one and it should not rely on the actual values of the 2 touches. Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: elantech - add Fujitsu Lifebook U745 to force crc_enabled

2016-02-25T19:57:49Z

commit 60603950f836ef4e88daddf61a273b91e671db2d upstream. Another Lifebook machine that needs the same quirk as other similar models to make the driver working. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=883192 Signed-off-by: Takashi Iwai Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: elantech - fix detection of touchpads where the revision matches a known rate

2015-06-22T23:55:52Z

commit 5f0ee9d17aae628b22be86966471db65be21f262 upstream. Make the check to skip the rate check more lax, so that it applies to all hw_version 4 models. This fixes the touchpad not being detected properly on Asus PU551LA laptops. Reported-and-tested-by: David Zafra Gómez Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: elantech - fix semi-mt protocol for v3 HW

2015-06-06T06:20:00Z

commit 3c0213d17a09601e0c6c0ae0e27caf70d988290f upstream. When the v3 hardware sees more than one finger, it uses the semi-mt protocol to report the touches. However, it currently works when num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1 finger as if num_fingers was 1. This confuses userspace which knows how to deal with extra fingers when all the slots are used, but not when some are missing. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101 Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: elantech - fix absolute mode setting on some ASUS laptops

2015-05-06T19:56:24Z

commit bd884149aca61de269fd9bad83fe2a4232ffab21 upstream. On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each time set_rate is done. In order to fix this, we will verify the firmware version, and if it matches the one in those laptops, the set_rate function is overloaded with a function elantech_set_rate_restore_reg_07 that performs the set_rate with the original function, followed by a restore of reg_07 (the register that sets the absolute mode on elantech v4 hardware). Also the ASUS TP500LN and X750JN firmware version, capabilities, and button constellation is added to elantech.c Reported-and-tested-by: George Moutsopoulos Signed-off-by: Ulrik De Bie Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: alps - allow up to 2 invalid packets without resetting device

2014-11-21T17:22:54Z

commit 9d720b34c0a432639252f63012e18b0507f5b432 upstream. On some Dell Latitude laptops ALPS device or Dell EC send one invalid byte in 6 bytes ALPS packet. In this case psmouse driver enter out of sync state. It looks like that all other bytes in packets are valid and also device working properly. So there is no need to do full device reset, just need to wait for byte which match condition for first byte (start of packet). Because ALPS packets are bigger (6 or 8 bytes) default limit is small. This patch increase number of invalid bytes to size of 2 ALPS packets which psmouse driver can drop before do full reset. Resetting ALPS devices take some time and when doing reset on some Dell laptops touchpad, trackstick and also keyboard do not respond. So it is better to do it only if really necessary. Signed-off-by: Pali Rohár Tested-by: Pali Rohár Reviewed-by: Hans de Goede Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: alps - ignore potential bare packets when device is out of sync

2014-11-21T17:22:53Z

commit 4ab8f7f320f91f279c3f06a9795cfea5c972888a upstream. 5th and 6th byte of ALPS trackstick V3 protocol match condition for first byte of PS/2 3 bytes packet. When driver enters out of sync state and ALPS trackstick is sending data then driver match 5th, 6th and next 1st bytes as PS/2. It basically means if user is using trackstick when driver is in out of sync state driver will never resync. Processing these bytes as 3 bytes PS/2 data cause total mess (random cursor movements, random clicks) and make trackstick unusable until psmouse driver decide to do full device reset. Lot of users reported problems with ALPS devices on Dell Latitude E6440, E6540 and E7440 laptops. ALPS device or Dell EC for unknown reason send some invalid ALPS PS/2 bytes which cause driver out of sync. It looks like that i8042 and psmouse/alps driver always receive group of 6 bytes packets so there are no missing bytes and no bytes were inserted between valid ones. This patch does not fix root of problem with ALPS devices found in Dell Latitude laptops but it does not allow to process some (invalid) subsequence of 6 bytes ALPS packets as 3 bytes PS/2 when driver is out of sync. So with this patch trackstick input device does not report bogus data when also driver is out of sync, so trackstick should be usable on those machines. Signed-off-by: Pali Rohár Tested-by: Pali Rohár Reviewed-by: Hans de Goede Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: elantech - fix detection of touchpad on ASUS s301l

2014-10-05T21:54:12Z

commit 271329b3c798b2102120f5df829071c211ef00ed upstream. Adjust Elantech signature validation to account fo rnewer models of touchpads. Reported-and-tested-by: Màrius Monton Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: synaptics - add support for ForcePads

2014-10-05T21:54:12Z

commit 5715fc764f7753d464dbe094b5ef9cffa6e479a4 upstream. ForcePads are found on HP EliteBook 1040 laptops. They lack any kind of physical buttons, instead they generate primary button click when user presses somewhat hard on the surface of the touchpad. Unfortunately they also report primary button click whenever there are 2 or more contacts on the pad, messing up all multi-finger gestures (2-finger scrolling, multi-finger tapping, etc). To cope with this behavior we introduce a delay (currently 50 msecs) in reporting primary press in case more contacts appear. Reviewed-by: Hans de Goede Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set

2014-07-07T01:54:13Z

commit fb4f8f568a9def02240ef9bf7aabd246dc63a081 upstream. The touchpad on the GIGABYTE U2442 not only stops communicating when we try to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS versions also when we set bit 1 (enable two finger mode auto correct). I've asked the original reporter of: https://bugzilla.kernel.org/show_bug.cgi?id=61151 To check that not setting bit 1 does not lead to any adverse effects on his model / BIOS revision, and it does not, so this commit fixes the touchpad not working on these versions by simply never setting bit 1 for laptop models with the no_hw_res quirk. Reported-and-tested-by: James Lademann Tested-by: Philipp Wolfer Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman