user/sven/linux.git/drivers/input/rmi4, branch v5.7

Input: synaptics-rmi4 - fix error return code in rmi_driver_probe()

2020-04-28T23:11:40Z

Fix to return a negative error code from the input_register_device() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Link: https://lore.kernel.org/r/20200428134948.78343-1-weiyongjun1@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

Input: synaptics-rmi4 - really fix attn_data use-after-free

2020-04-28T01:13:37Z

Fix a use-after-free noticed by running with KASAN enabled. If rmi_irq_fn() is run twice in a row, then rmi_f11_attention() (among others) will end up reading from drvdata->attn_data.data, which was freed and left dangling in rmi_irq_fn(). Commit 55edde9fff1a ("Input: synaptics-rmi4 - prevent UAF reported by KASAN") correctly identified and analyzed this bug. However the attempted fix only NULLed out a local variable, missing the fact that drvdata->attn_data is a struct, not a pointer. NULL out the correct pointer in the driver data to prevent the attention functions from copying from it. Fixes: 55edde9fff1a ("Input: synaptics-rmi4 - prevent UAF reported by KASAN") Fixes: b908d3cd812a ("Input: synaptics-rmi4 - allow to add attention data") Signed-off-by: Evan Green Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200427145537.1.Ic8f898e0147beeee2c005ee7b20f1aebdef1e7eb@changeid Signed-off-by: Dmitry Torokhov

Input: synaptics-rmi4 - set reduced reporting mode only when requested

2020-03-24T22:45:18Z

The previous patch "c5ccf2ad3d33 (Input: synaptics-rmi4 - switch to reduced reporting mode)" enabled reduced reporting mode unintentionally on some devices, if the firmware was configured with default Delta X/Y threshold values. The result unintentionally degrade the performance of some touchpads. This patch checks to see that the driver is modifying the delta X/Y thresholds before modifying the reporting mode. Signed-off-by: Andrew Duggan Fixes: c5ccf2ad3d33 ("Input: synaptics-rmi4 - switch to reduced reporting mode") Link: https://lore.kernel.org/r/20200312005549.29922-1-aduggan@synaptics.com Signed-off-by: Dmitry Torokhov

Merge branch 'next' into for-linus

2020-02-01T01:42:33Z

Prepare input updates for 5.6 merge window.

Input: synaptics-rmi4 - switch to reduced reporting mode

2020-02-01T01:39:22Z

When the distance thresholds are set the controller must be in reduced reporting mode for them to have any effect on the interrupt generation. This has a potentially large impact on the number of events the host needs to process. Signed-off-by: Lucas Stach Reviewed-by: Andrew Duggan Link: https://lore.kernel.org/r/20200120111628.18376-1-l.stach@pengutronix.de Signed-off-by: Dmitry Torokhov

Input: rmi_f54 - read from FIFO in 32 byte blocks

2020-01-17T04:22:56Z

The F54 Report Data is apparently read through a fifo and for the smbus protocol that means that between reading a block of 32 bytes the rmiaddr shouldn't be incremented. However, changing that causes other non-fifo reads to fail and so that change was reverted. This patch changes just the F54 function and it now reads 32 bytes at a time from the fifo, using the F54_FIFO_OFFSET to update the start address that is used when reading from the fifo. This has only been tested with smbus, not with i2c or spi. But I suspect that the same is needed there since I think similar problems will occur there when reading more than 256 bytes. Signed-off-by: Hans Verkuil Tested-by: Hans Verkuil Reported-by: Timo Kaufmann Link: https://lore.kernel.org/r/20200115124819.3191024-3-hverkuil-cisco@xs4all.nl Signed-off-by: Dmitry Torokhov

Revert "Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers"

2020-01-17T04:22:55Z

This reverts commit a284e11c371e446371675668d8c8120a27227339. This causes problems (drifting cursor) with at least the F11 function that reads more than 32 bytes. The real issue is in the F54 driver, and so this should be fixed there, and not in rmi_smbus.c. So first revert this bad commit, then fix the real problem in F54 in another patch. Signed-off-by: Hans Verkuil Reported-by: Timo Kaufmann Fixes: a284e11c371e ("Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200115124819.3191024-2-hverkuil-cisco@xs4all.nl Signed-off-by: Dmitry Torokhov

Merge branch 'next' into for-linus

2019-12-06T19:14:23Z

Prepare second round of updates for 5.5 merge window.

Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers

2019-12-05T01:58:16Z

This increment of rmi_smbus in rmi_smb_read/write_block() causes garbage to be read/written. The first read of SMB_MAX_COUNT bytes is fine, but after that it is nonsense. Trial-and-error showed that by dropping the increment of rmiaddr everything is fine and the F54 function properly works. I tried a hack with rmi_smb_write_block() as well (writing to the same F54 touchpad data area, then reading it back), and that suggests that there too the rmiaddr increment has to be dropped. It makes sense that if it has to be dropped for read, then it has to be dropped for write as well. It looks like the initial work with F54 was done using i2c, not smbus, and it seems nobody ever tested F54 with smbus. The other functions all read/write less than SMB_MAX_COUNT as far as I can tell, so this issue was never noticed with non-F54 functions. With this change I can read out the touchpad data correctly on my Lenovo X1 Carbon 6th Gen laptop. Signed-off-by: Hans Verkuil Link: https://lore.kernel.org/r/8dd22e21-4933-8e9c-a696-d281872c8de7@xs4all.nl Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash

2019-12-05T01:58:16Z

F34 is a bit special as it reinitializes the device and related driver structs during the firmware update. This clears the fn_irq_mask which will then prevent F34 from receiving further interrupts, leading to timeouts during the firmware update. Make sure to reinitialize the IRQ enables at the appropriate times. The issue is in F34 code, but the commit in the fixes tag exposed the issue, as before this commit things would work by accident. Fixes: 363c53875aef (Input: synaptics-rmi4 - avoid processing unknown IRQs) Signed-off-by: Lucas Stach Link: https://lore.kernel.org/r/20191129133514.23224-1-l.stach@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov