user/sven/linux.git/drivers/input/touchscreen/Makefile, branch v4.19.127

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2018-08-18T23:48:07Z

Pull input updates from Dmitry Torokhov: - a new driver for Rohm BU21029 touch controller - new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free - updates to Atmel, eeti. pxrc and iforce drivers - assorted driver cleanups and fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) MAINTAINERS: Add PhoenixRC Flight Controller Adapter Input: do not use WARN() in input_alloc_absinfo() Input: mark expected switch fall-throughs Input: raydium_i2c_ts - use true and false for boolean values Input: evdev - switch to bitmap API Input: gpio-keys - switch to bitmap_zalloc() Input: elan_i2c_smbus - cast sizeof to int for comparison bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free() md: Avoid namespace collision with bitmap API dm: Avoid namespace collision with bitmap API Input: pm8941-pwrkey - add resin entry Input: pm8941-pwrkey - abstract register offsets and event code Input: iforce - reorganize joystick configuration lists Input: atmel_mxt_ts - move completion to after config crc is updated Input: atmel_mxt_ts - don't report zero pressure from T9 Input: atmel_mxt_ts - zero terminate config firmware file Input: atmel_mxt_ts - refactor config update code to add context struct Input: atmel_mxt_ts - config CRC may start at T71 Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE ...

Input: add bu21029 touch driver

2018-06-24T22:20:12Z

Add Rohm BU21029 resistive touch panel controller support with I2C interface. Signed-off-by: Zhu Yi Signed-off-by: Mark Jonas Reviewed-by: Heiko Schocher Reviewed-by: Rob Herring Signed-off-by: Dmitry Torokhov

input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen

2018-06-10T12:26:40Z

This adds a generic resistive touchscreen (GRTS) driver, which is based on an IIO device (an ADC). It must be connected to the channels of an ADC to receive touch data. Then it will feed the data into the input subsystem where it registers an input device. It uses an IIO callback buffer to register to the IIO device Some parts of this patch are based on initial original work by Mohamed Jamsheeth Hajanajubudeen and Bandaru Venkateswara Swamy Signed-off-by: Eugen Hristev Acked-by: Dmitry Torokhov Signed-off-by: Jonathan Cameron

Input: add support for ChipOne icn8505 based touchscreens

2018-05-09T20:29:35Z

The ChipOne icn8505 is an i2c capacitive touchscreen controller typically used in cheap x86 tablets, this commit adds a driver for it. Note the icn8505 is somewhat similar to the icn8318 and I started with modifying that driver to support both, but in the end the differences were too large and I decided to write a new driver instead. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov

Input: remove atmel-wm97xx touchscreen driver

2018-01-19T17:35:24Z

Since AVR32 arch is gone, atmel-wm97xx driver is useless. In theory it could have been rewritten to work with AT91 devices, but the driver is from the platform data era, and a bit hard coded to work on AVR32 hardware variant of the AC97C peripheral, so let's remove it. Signed-off-by: Corentin Labbe Acked-by: Hans-Christian Noren Egtvedt Signed-off-by: Dmitry Torokhov

Input: add support for the Samsung S6SY761 touchscreen

2017-11-10T18:18:23Z

The S6SY761 touchscreen is a capicitive multi-touch controller for mobile use. It's connected with i2c at the address 0x48. This commit provides a basic version of the driver which can handle only initialization, touch events and power states. The controller is controlled by a firmware which, in the version I currently have, doesn't provide all the possible functionalities mentioned in the datasheet. Signed-off-by: Andi Shyti Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov

Input: add support for HiDeep touchscreen

2017-11-10T18:18:22Z

The HiDeep touchscreen device is a capacitive multi-touch controller mainly for multi-touch supported devices use. It use I2C interface for communication to IC and provide axis X, Y, Z locations for ten finger touch through input event interface to userspace. It support the Crimson and the Lime two type IC. They are different the number of channel supported and FW size. But the working protocol is same. Signed-off-by: Anthony Kim Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov

Merge tag 'v4.14-rc8' into next

2017-11-08T02:11:56Z

Merge with mainline to bring in SPDX markings to avoid annoying merge problems when some header files get deleted.

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Input: add I2C attached EETI EXC3000 multi touch driver

2017-10-25T21:55:33Z

The 3000 series have a new protocol which allows to report up to 5 points in a single 66 byte frame. One must always read in 66 byte frames. To support up to 10 points, two consecutive frames need to be read: The first frame says how many points until sync. The second frame must say zero points or both frames must be discarded. To be able to work with the higher 400KHz I2C bus rate, one must successfully send a special package prior _each_ read or the controller will refuse to cooperate. This is a minimal implementation based on egalax_i2c.c (which can be found on the internet) and egalax_ts.c but without the vendor interface and no power management support. Signed-off-by: Ahmet Inan Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov