user/sven/linux.git/drivers/input/touchscreen, branch v4.4.271

Input: elo - fix an error code in elo_connect()

2021-03-03T15:44:19Z

[ Upstream commit 0958351e93fa0ac142f6dd8bd844441594f30a57 ] If elo_setup_10() fails then this should return an error code instead of success. Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/YBKFd5CvDu+jVmfW@mwanda Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: goodix - add upside-down quirk for Teclast X98 Pro tablet

2020-12-29T12:42:41Z

[ Upstream commit cffdd6d90482316e18d686060a4397902ea04bd2 ] The touchscreen on the Teclast x98 Pro is also mounted upside-down in relation to the display orientation. Signed-off-by: Simon Beginn Signed-off-by: Bastien Nocera Link: https://lore.kernel.org/r/20201117004253.27A5A27EFD@localhost Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: ads7846 - fix unaligned access on 7845

2020-12-29T12:42:36Z

[ Upstream commit 03e2c9c782f721b661a0e42b1b58f394b5298544 ] req->sample[1] is not naturally aligned at word boundary, and therefore we should use get_unaligned_be16() when accessing it. Fixes: 3eac5c7e44f3 ("Input: ads7846 - extend the driver for ads7845 controller support") Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: ads7846 - fix integer overflow on Rt calculation

2020-12-29T12:42:36Z

[ Upstream commit 820830ec918f6c3dcd77a54a1c6198ab57407916 ] In some rare cases the 32 bit Rt value will overflow if z2 and x is max, z1 is minimal value and x_plate_ohms is relatively high (for example 800 ohm). This would happen on some screen age with low pressure. There are two possible fixes: - make Rt 64bit - reorder calculation to avoid overflow The second variant seems to be preferable, since 64 bit calculation on 32 bit system is a bit more expensive. Fixes: ffa458c1bd9b6f653008d450f337602f3d52a646 ("spi: ads7846 driver") Co-developed-by: David Jander Signed-off-by: David Jander Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20201113112240.1360-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()

2020-10-29T08:03:07Z

[ Upstream commit 30df23c5ecdfb8da5b0bc17ceef67eff9e1b0957 ] If imx6ul_tsc_init() fails then we need to clean up the clocks. I reversed the "if (input_dev->users) {" condition to make the code a bit simpler. Fixes: 6cc527b05847 ("Input: imx6ul_tsc - propagate the errors") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20200905124942.GC183976@mwanda Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: usbtouchscreen - add support for BonXeon TP

2020-06-03T06:12:10Z

[ Upstream commit e3b4f94ef52ae1592cbe199bd38dbdc0d58b2217 ] Based on available information this uses the singletouch irtouch protocol. This is tested and confirmed to be fully functional on the BonXeon TP hardware I have. Signed-off-by: James Hilliard Link: https://lore.kernel.org/r/20200413184217.55700-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: edt-ft5x06 - fix setting gain, offset, and threshold via device tree

2020-05-10T08:26:03Z

commit dc262dfaaeda7617ae0b15b5ce1252a6cd102b19 upstream. A recent patch broke parsing the gain, offset, and threshold parameters from device tree. Instead of setting the cached values and writing them to the correct registers during probe, it would write the values from DT into the register address variables and never write them to the chip during normal operation. Fixes: 2e23b7a96372 ("Input: edt-ft5x06 - use generic properties API") Signed-off-by: Philipp Zabel Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: edt-ft5x06 - work around first register access error

2020-02-28T14:39:02Z

[ Upstream commit e112324cc0422c046f1cf54c56f333d34fa20885 ] The EP0700MLP1 returns bogus data on the first register read access (reading the threshold parameter from register 0x00): edt_ft5x06 2-0038: crc error: 0xfc expected, got 0x40 It ignores writes until then. This patch adds a dummy read after which the number of sensors and parameter read/writes work correctly. Signed-off-by: Philipp Zabel Signed-off-by: Marco Felsch Tested-by: Andy Shevchenko Reviewed-by: Andy Shevchenko Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: sur40 - fix interface sanity checks

2020-01-29T09:21:51Z

commit 6b32391ed675827f8425a414abbc6fbd54ea54fe upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. This in turn could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: bdb5c57f209c ("Input: add sur40 driver for Samsung SUR40 (aka MS Surface 2.0/Pixelsense)") Signed-off-by: Johan Hovold Acked-by: Vladis Dronov Link: https://lore.kernel.org/r/20191210113737.4016-8-johan@kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: atmel_mxt_ts - disable IRQ across suspend

2020-01-04T12:34:24Z

[ Upstream commit 463fa44eec2fef50d111ed0199cf593235065c04 ] Across suspend and resume, we are seeing error messages like the following: atmel_mxt_ts i2c-PRP0001:00: __mxt_read_reg: i2c transfer failed (-121) atmel_mxt_ts i2c-PRP0001:00: Failed to read T44 and T5 (-121) This occurs because the driver leaves its IRQ enabled. Upon resume, there is an IRQ pending, but the interrupt is serviced before both the driver and the underlying I2C bus have been resumed. This causes EREMOTEIO errors. Disable the IRQ in suspend, and re-enable it on resume. If there are cases where the driver enters suspend with interrupts disabled, that's a bug we should fix separately. Signed-off-by: Evan Green Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin